The calamares module and branding was made distro-agnostic and moved to
calamares-extensions.git. A new "make install" target inside
postmarketos-ondev.git installs all files, so we need less logic in the
APKBUILD.
Replace lightdm with tinydm. Add xset dependency to disable screen
blanking.
Don't use cmake to copy the files to the target path, because it would
install to the wrong directory:
/usr/lib/qml/QtQuick/VirtualKeyboard/Styles/Plasma/
instead of:
/usr/lib/qt5/qml/QtQuick/VirtualKeyboard/Styles/Plasma/
I've spent some time trying to figure out why it does that, but could
not find it right away. This is just a legacy component, so not worth
spending much time on this detail.
Adds support for pinephone
Adds migration away from python and to C for event path discovery and touch dimensions
[ci:skip-build]: already built successfully in CI
Let all packages depending on tinydm depend on tinydm-openrc too. This
is needed to make sure that tinydm-openrc is installed, before the
tinydm service is enabled in the UI's post-install scripts.
This was not an issue because tinydm currently depends on tinydm-openrc.
But that's a hack and will be removed when upstreaming tinydm to alpine.
[ci:skip-build]: already built successfully in CI
Fix failure in the osk-sdl "keyboard-font" check when there is a second
key starting with "keyboard-font" (as in osk-sdl MR 105):
==> initramfs: creating /boot/initramfs-postmarketos-allwinner-extra
ERROR: Font specified in /etc/osk.conf does not exist!
ERROR: postmarketos-mkinitfs-0.17-r0.trigger: script exited with error 1
Do not change config files in post-install scripts anymore (with sed
commands or by other means). Instead, ship the files inside the packages
and use "replaces", so apk allows the package to overwrite files from
other packages:
https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces
Notes on specific files:
* /etc/elogind/logind.conf: original file only consists of commented out
compile defaults. Copy them over for now. In the future we should be
able to install our own config into a .d directory, without all the
comments: 8358fc5950
* /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk
entries, which are not useful for postmarketOS:
https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD
* /etc/motd: reformat the text, add link to the chat
* /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"',
make the override file as if the sed statement from post-install was
executed
* /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches
this file. We probably added it back in 2017 in relation to enabling
D-Bus (though the PR does not mention it explicity), but at least with
the current init.d script of NetworkManager, we can simply have '-u' in
wpa_supplicant_args:
https://github.com/postmarketOS/pmbootstrap/pull/578https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd
* /etc/sudoers: base on original /etc/sudoers, but remove all the
commented out stuff except for the visudo note at the top. We could
also put a file in /etc/sudoers.d, but since the wheel line is present
in the original /etc/sudoers and only commented out, it would be kind
of unexpected to enable it in a file in /etc/sudoers.d. I prefer this
stripped down version of the file, that is easy to read.
Refactor the install code to be generic, so we only need to add the new
path in one place when adding a new file. Put the full path into the
filename to make this possible.
I've tried to mimic the final directory structure in the aport first
(e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile),
but that leads to conflicts as abuild only takes the filename for
checksums (conflict with etc/conf.d/swapfile):
https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013
We don't really need checksum verification for the files shipped in the
same directory (not downloaded), but nevertheless this is a bug. It
leads to confusing behavior and might be fixed by letting abuild demand
that there is only one source file with the same name, as I suggested in
the issue linked above. So let's avoid this altogether with the flat
file name.
wireguard needs the ipv6 multitable option to make a seperate routing
table for the inside and outside vpn part of the network.
[ci:skip-build]: already built successfully in CI
Even on the PinePhone KDE community edition Megapixels will be shipped
instead of plasma-camera, so let's do the same
The resulting package doesn't change, _pmb_recommends is only a
pmbootstrap thing, so we don't have to bump pkgrel
[ci:skip-vercheck]
Battery percentage monitoring support:
* lg-hammerhead
* samsung-klte
Mobile internet support:
* fairphone-fp2
QCOM_SOCINFO for querying information from the SoC
[ci:skip-build]: already built successfully in CI
Update ov5640 autofocus related patch. We had it working with Martijn's
patch in 5.9.1_git20201019-r2 (MR 1654), but then dropped the patch in
favor of the patch that was added to megi's tree in 5.9.3_git20201101
(MR 1678).
It turns out that the patch added to megi's tree was different than the
patch we were carrying, it was a WIP version where loading the autofocus
firmware did not work anymore.
Megi decided to drop the autofocus patch from his tree for now, as the
firmware uploader takes more time in Martijn's proper patch. According
to Martijn it takes about a second, which seems reasonable for the
postmarketOS use case. I've added the previous version again as
out-of-tree patch.
Martijn found that for some reason the continuous autofocus still
doesn't want to start with this kernel and current patch version, as for
some reason the firmware load fails. But he extended the patch to make
autofocus work again with "tap to focus" at least.
0005-dts-pinephone-Disable-flash-led-in-OV5640-node.patch is not needed
anymore, the same change is in megi's tree.
Co-Authored-By: Martijn Braam <martijn@brixit.nl>
[ci:skip-build]: already built successfully in CI
