At the moment, a full file system check is forced even if the
file system is marked clean (i.e. it was properly unmounted the
last time it was used). On large file systems with slow I/O
(e.g. SD cards), this can take a significant amount of time.
Removing the -f option of e2fsck allows skipping the full
file system check if it is marked clean, speeding up the boot time.
Some devices' downstream kernels may have different RNDIS/functionfs
drivers (ex. QCRNDIS) that require different values for some
configfs gadget attributes. Make it possible to customize with
deviceinfo file from device- package.
The idea is that each device- package can optionally specify a
bunch of `deviceinfo_usb_*` variables to customize the way it is
visible on USB bus. The ability to override
`deviceinfo_usb_rndis_function` is essential to make downstream
sdm660 based device to appear on USB bus.
While at it, make `idVendor`, `idProduct` and `serialnumber` also
customizable. So that we can make, for example, PineTab appear on
USB bus as PineTab, not as "Google Inc. Nexus 4 (fastboot)".
* Only run the wiki test, if anything matching device/device-* was
modified.
* Split testcase linting (flake8) from shellcheck and only run flake8 if
.gitlab-ci/* was modified.
* Rename .gitlab-ci/static_code_analysis.sh to .gitlab-ci/shellcheck.sh
and make it scan all pre/post install/upgrade/deinstall scripts.
[ci:skip-vercheck]: other commits in this merge request have several
intended version downgrades, such as 3 -> 1.0.0
device/device-asus-me176c:
- Install me176c-factory to apply correct MAC addresses for
WiFi and BT
- Use FAT32 for boot partition. This allows flashing the boot
partition directly as ESP (EFI System Partition).
- Overall cleanup
device/linux-asus-me176c:
- Update kernel fork to 4.19.80
- Cleanup APKBUILD
- Stop building patched ACPI DSDT table directly into kernel
firmware/firmware-asus-me176c:
- Package WiFi firmware
firmware/firmware-asus-me176c-acpi:
- New package for the patched ACPI DSDT table
-> Separate from firmware-asus-me176c because it is always required,
(not optional)
[ci:skip-build]: runs into timeout
Without this, the device will simply run the broken ACPI DSDT table, so
we might as well update it. If we had put it into a subpackage, it
would not be possible to use the fixed DSDT without any other firmware
packages.
The changes in command line parameters of rmtfs mean: use the modem*
partitions directly (-P), in read-only mode (-r)...and it will boot the
modem automagically when ready (-s)
I've removed the udev rules in the rmtfs package because it doesn't look
like they are needed with those command line flags.
Mainline U-Boot looks for the device tree blob in the "second" area
of the Android boot image (see https://patchwork.ozlabs.org/patch/1025211/).
Add an option "deviceinfo_bootimg_dtb_second" to place the device DTB there.
Currently, the USB networking setup using configfs does not configure
a "serialnumber" for the USB gadget. This means that an empty
serial number will be sent during USB enumeration.
This is usually not a problem, but it seems to cause issues under
special circumstances (on asus-me176c on one of my PCs).
The USB Gadget configfs documentation also suggests setting
the "serialnumber":
https://www.kernel.org/doc/Documentation/usb/gadget_configfs.txt
It can be any string, so we can just set it as "postmarketOS" like
the manufacturer.
