So that we can warranty that any of the packages is installed by
default. In addition, make sure that pipewire-pulse can never be
installed together with
postmarketos-base-ui-audio-pulseaudio. pipewire-pulse provides
pulseaudio, so installations that have pipewire-pulse already
installed would end up in a very weird position otherwise.
Fixes 87d355e08d
[ci:skip-build]: already built successfully in CI
These are increasingly needed for camera and screen sharing/recording
tasks. To make the development easier and future-proof, install them
by default. They can now be removed from the audio subpackage
Fixes#2785
These are useful on desktops/laptops/tablets.
This was only added to the gnome (desktop) UI because:
1) The system monitor could be useful on mobile devices however the UI
is not adaptive.
2) Disk utility isn't that useful on mobile devices since it tends to
show dozens of partitions on android phones, and so it's kinda
confusing and it would be easy for users to mess things up.
[ci:skip-build]: already built successfully in CI
90b0205a ("postmarketos-ui-i3wm: configure wallpaper globally") directly copies
the default i3 config into the user's config directory. Change to using the
wizard instead
After removing the following files, $pkgdir/usr/share/deviceinfo is empty:
- $pkgdir/usr/share/deviceinfo/$pkgname
- $pkgdir/usr/share/deviceinfo/deviceinfo
Remove it when it's empty.
[ci:skip-build]: already built successfully in CI
Features:
- Include "sort-key" in bootloader spec config (MR 58)
- Integrate pmos-update-depthcharge-kernel and pmos-update kernel
logic (MR 55)
[ci:skip-build] already built successfully in CI
Apparently f2fs has a soft dependency on this driver, so if it's =m in
the kernel then let's make sure it's always in the initramfs since f2fs
is a supported filesystem.
Fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2711
[ci:skip-build]: already built successfully in CI
This subpackage now installs a file that was previously in the other
subpackage it is meant to replace, leading to upgrade conflicts that
have to be manually resolved (i.e. with apk fix)
Fixes: 126f43220 and 1712a2d03
* Bring back /usr/share/wallpapers/postmarketos.jpg, which is used in at
least as the default in sway, mate, lxqt, xfce4
* Move postmarketos-gnome.xml here (instead of taking the version from
artwork.git), because the paths mentioned in the xml file are also set
in this package in pmaports. This makes it easier to maintain.
* Fix the paths in postmarketos-gnome.xml (postmarketos vs
postmarketOS).
* Keep the postmarketos-gnome.xml name, as we had it before recent
wallpaper changes, and as it is the same name in v23.12 still. This
should make it backwards compatible for people upgrading from v23.12.
* Move 10_pmOS-wallpaper.gschema.override here for the same reason.
Fixes: 72357ecf ("main/postmarketos-artwork: upgrade to Meadow wallpaper and make Plasma-compatible (MR 4805)")
[ci:skip-build]: already built successfully in CI
Remove the postmarketos-base-ui-gnome-wallpapers subpackage that only
Phosh and GNOME desktop used to depend on, and instead add a hard
dependency on postmarketos-artwork-wallpapers.
The config that enables the wallpapers will be moved to
postmarketos-artwork-wallpapers in the next commit. This will make it
easier to maintain, the paths to the wallpapers will only be in one
package instead of being scattered across many.
Fix that no wallpaper was set for sway:
[ERROR] [sway/config/output.c:828] failed to execute 'swaybg' (background configuration probably not applied): No such file or directory
The current invocation doesn't work:
$ busybox dc "100" "5" / p
dc: can't open '100': No such file or directory
Fix it so that it does:
$ busybox dc -e "100 5 / p"
20
One of the messages that is printed on failure was missing
the "WARNING:" prefix. Address that too.
Signed-off-by: Andrea Bolognani <eof@kiyuko.org>
How to boot from USB drives:
1. Make sure the extcon has OTG support and included in initramfs
2. Make sure the PMIC supports the power to OTG devices, and included in initramfs. Otherwise, a hub with external power supply is required.
3. Make sure module `usb-storage` is enabled in initramfs
4. `pmbootstrap install --sdcard=/dev/<usb_drive>`
- postmarketOS/pmbootstrap@942ee20789 is required to ignore sdcard check. Thanks @ollieparanoid for the patch.
5. `pmbootstrap flasher flash_kernel`
6. Insert the USB drive to OTG and boot
[ci:skip-build]: already built successfully in CI
The postmarketos-artwork-wallpapers-gnome package no longer exists. Now
we just depend on the postmarketos-artwork-wallpapers package.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Only temporarilly. This is in pmb_recommends, so does not need pkgver
bump. We can swap them back once it's built for armv7 in alpine, but
it's now blocking all MRs from merging.
[ci:skip-vercheck]
Reading the `ifname` of a gadget that has not been configured with a UDC
succeeds with the content `(unnamed net_device)` instead of failing.
So we need to explicitly check that a UDC was configured before we read
the interface name.
Ref: #2648
[ci:skip-build]: already built successfully in CI
Reading the `ifname` of a gadget that has not been configured with a UDC
succeeds with the content `(unnamed net_device)` instead of failing.
So we need to explicitly check that a UDC was configured before we read
the interface name.
Ref: #2648
Sometimes, there can be more than 10M of stuff collected for logging,
which breaks things.. bump the size to 32M which should still be small
enough for low end / old devices.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
A bunch of override files in postmarketos-base-ui-plasma seem to have come from the plasma-mobile ui package, which probably shouldn't be on desktop and bigscreen.
With Plasma 6, a lot of the overrides are now no longer necessary for Plasma Mobile.
Situation with each file:
- 000-gschema.override - This likely was for changing maliit themes and GTK title bar layout for Plasma Mobile, maliit theming was dropped (https://github.com/maliit/keyboard/pull/108), and title bar layout is now handled within Plasma Mobile
- kdeglobals - This was for setting the look-and-feel on Plasma Mobile and default browser, it's now handled within Plasma Mobile envmanager
- kwinrc - These were settings for disabling window decorations and setting the vkbd to maliit, which is now handled in Plasma Mobile envmanager
- kscreenlockerrc - This is to autolock the screen after login (tinydm autologs in), the file was for Plasma Mobile, I don't think we want it for Desktop since SDDM is used there
Drop duplicated dependencies, which have been already included
in postmarketos-base-ui-plasma:
- dnsmasq
- elogind
- elogind-openrc
- polkit-kde-agent-1
[ci:skip-build]: already built successfully in CI
All of Plasma Bigscreen was removed from aports[1]. It will return with
KDE 6.1, according to PureTryOut. But for now, disable this package by
making it build on no architectures so that CI works again.
[1]: 4e7fa26ea2
[ci:skip-vercheck]: Version does not need to change when changin arches.
This reverts commit 518e62df34
"main/postmarketos-base-ui: add tinydm subpackage to pull in xinit (MR 4814)"
aports/tinydm now provides its own -x11 subpackage to do this since
7df6d02609
/dev/pmsg0 may be created by pstore driver. When it is available,
write logs into it so logs can be recovered through pstore after
a failed boot. This is useful for devices without console or hard
to get console.
Crappy workaround, it's better than having DNS broken...
See: https://gitlab.com/postmarketOS/pmaports/-/issues/2601
Also removed it from shellcheck, because SC doesn't like all of the
unused/unreachable things after the `exit 0`. This commit should be
reverted when the issue is actually fixed later...
[ci:skip-build] already built successfully in CI
tinydm uses startx for Xorg UIs, which is provided by the xinit package.
The xinit package used to be pulled in automatically by
the xorg-server package, but this stopped being the case with
1fd2d70696
this allows to opt-out of usb-tethering on pmOS devices with
`apk add !postmarketos-base-ui-networkmanager-usb-tethering`
this is useful for developers with laptops on pmOS / dailydriving
those laptops on pmOS.
[ci:skip-build]: Already built successfully in CI.
These apps are useful to have on the full GNOME desktop too, and this
removes the need to duplicate package lists across UI meta packages that
depend on the base gnome UI package.
Some devices take time to initialize storage, e.g. Qualcomm laptops
using ADSP need to load firmware firstly, and initramfs script does
not always manage to mount boot partition in time.
Unfortunately, there is no reliable way to reproduce the issue, but
this patch should fix cases like this.
Which replaces /lib/udev/rules.d/60-persistent-v4l.rules (from the
eudev package) with a symlink to /dev/null. Around 20 devices need
this to fix a kernel panic with downstream kernel when starting udev.
Issue happens due to that camera firmware is missing and/or not loaded
properly.
The configfs gadget can provide the actual interface name, which may not be
the default "usb0" since another gadget driver might have claimed "usb0".
This code is based on the `start_unudhcpd` function in `init_functions.sh`
[ci:skip-build] already built successfully in CI
Before this change the script assumed that the device has only one UDC.
However it is possible for a device to have multiple UDCs, in which case
the deviceinfo is the appropriate place to specify which one should be used.
This change adds an optional deviceinfo variable `deviceinfo_usb_network_udc`
to specify the UDC that should be used.
Also, before this change the script assumed the USB network interface name is
"usb0". But other gadget drivers like `g_cdc` can claim USB interfaces
before the initramfs script gets around to creating one for USB networking,
so the interface might be "usb1" or something else. The configfs gadget itself
can provide the actual interface name, so this change makes the script
use that.
In many cases, when fw is installed in /lib/firmware, some of it ends up
in the initramfs. In those situations, mkinitfs should run so that the
initramfs gets the latest fw. This will result in mkinitfs possibly
running in cases where it doesn't matter (i.e. device has fw in
/lib/firmware but none is used in the initramfs), but I think the
trade-off is worth it.
This also breaks the triggers= line into multiple lines so that it's
easier to review/maintain. We can't prepend whitespace on these lines
since the apkbuild parser expects dirs to be separated by ":"
This is a device-specific package. The only device that depends on
this, device-nokia-n900, is in community, so let's move it there too.
[ci:skip-build]: already built successfully in CI
This is a device-specific package. No need to keep it in main where it
gets included in stable releases unnecessarily. The only device that
depends on this, device-inet-a33, is in testing, so let's move it there
too.
Dependencies:
- Add dependency "xfce4-screensaver" to provide virtual keyboard at screen
unlock. As a dependency because several settings need to be implemented to
integrate it well in LXQt.
- Add dependency "setxkbmap" to make keyboard layout settings work
- Add dependency "upower" to make battery icon in panel work
Recommends:
- Add recommend "pulseaudio" to make sound work
- Add recommend "adwaita-icon-theme" because that's used by xfce4-screensaver
- Remove recommend "pavucontrol" because there is already "pavucontrol-qt"
Sources:
- Add autostart desktop file for xfce4-screensaver
- Add autostart desktop file to override lxqt-xscreensaver-autostart
- Modify autostart desktop file for onboard, a startup delay mitigates
an issue with the onboard panel icon not showing up at the first boot
- Modify lxqt-tablet.sh to include custom XDG_DATA_DIRS
- Add application desktop file to override xfce4-screensaver-preferences,
adding it to the menu
- Add application desktop file to override xscreensaver-settings, removing it
from the menu
- Change install location of "lxqt-tablet" repository configs from
/etc/skel/.config to /etc/xdg/lxqt-tablet. That way they are handled as
distribution-specific configs and are separated from the user configs in
~/.config.
- Upgrade to version 0.3 of "lxqt-tablet" repository:
- Change theme to "Dark" to fix panel look
- Increase panel size
- Change wallpaper mode to "zoom" to avoid deforming the picture
- Disable global single click to not interfere with PCManFM
- Add terminal and file manager launchers to panel
- Rename openbox xml file to apply the configs
- Set lock command to xfce4-screensaver
- Add xfconf files to configure xfce4-screensaver
- Clean up configs by removing default values
[ci:skip-build]: Already built successfully in CI.
Currently, when postmarketOS fails to boot up, retrieving any
information necessary to root cause the issue is non-trivial, requiring
building a custom initramfs with debug-shell enabled and then manually
copying out data.
Let's improve the situation by exporting logs automatically on boot
failure. This is safer than just exposing a root shell but still
provides a whole lot of useful info that should make duplicating and
triaging issues much easier for developers.
This commit implements the functionality and includes some generally
useful data. We then generate a README and expose files for each command/log
as well as an archive that can be easily attached to a GitLab issue.
To help with triaging, also record the version of the postmarketos-initramfs
package and hash the init.sh and init_functions.sh files.
For testing purposes, you can trigger the log recovery mode on-time by
creating an empty file named ".pmos_export_logs" in the /boot partition.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Always write logs to the ramdisk, adjust setup_log() to spawn "tail" to
pipe the log to the console device when PMOS_NO_OUTPUT_REDIRECT is set.
This is necessary to ensure that the initramfs logs can be extracted on
a failed boot.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
This was enabled in the "default" runlevel during upgrades, which is an
error, since it depends on bootmisc, which is in "boot" runlevel
Fixes#2473
[ci:skip-build]: Already built successfully in CI.
And enable it by default, since it's a sensible thing to do.
This makes the bootmisc config file unnecessary, since it was only
used before to make sure that /tmp was wiped on every boot.
Mounting /tmp as a tmpfs will be skipped if:
* The user or maintainer configured deviceinfo_tmp_as_tmpfs_size=0
* If they didn't but the device has less than 2GB of RAM
* And in any case, if it is already mounted, to respect users that
might have it in /etc/fstab
The options for mounting /tmp has been copied from my local debian
tmp.mount service. The only real difference is that we are mounting it
after /etc/fstab, and they do so before.
Fixes#2233
Notification daemon; provides nice HUD for volume control and allows
Blueman to normally send notifications instead of opening separate
windows (which can get very annoying for frequently-reconnecting
devices).
There are three changes from the config source "xfce4-phone":
- Move whiskermenu settings to xfconf (required by an upstream change)
- Hide tooltips by workaround (opacity and font size)
- Increase double-click distance tolerance
And one change in postmarketOS files:
- Enable mouse key buttons on onboard keyboard by default (eases
right-clicking)
[ci:skip-build]: Already built successfully in CI.
This allows GNOME Settings to display our wallpapers. And most
remarkably, it allows people to switch back to the original wallpaper
if they ever happen to change it.
[ci:skip-build]: already built successfully in CI
Logging is important, we want our users to have logging, so make sure we
enable the new logbookd service on existing installation.
We check that we're upgrading from a postmarketos-base version that
predates logbookd and only enable the service in this case. This way we
won't enable it again for folks who disabled it manually.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[ci:skip-vercheck]
Use logbookd to replace the busybox in-memory logger. The default
configuration of logbookd still logs in-memory but writes out the log on
shutdown or manual trigger.
The logread command is also replaced by a drop-in replacement for the
busybox tool.
The post-upgrade script in pmos-base isn't symlinked to the post-install
script, so zram-init wasn't being enabled on systems that upgraded to
the pmos-base version that intro'd this feature. I think this should
have been enabled by default on upgraded systems. There's a deviceinfo
toggle for it, so users who won't want to use this can set that var to
disable it, in that case having the service enabled is basically a
no-op.
Update by Oliver: add a comment to mention the deviceinfo variable
[ci:skip-build]: already built successfully in CI
This was a fallout from the /usr/share relocation, only found and
reported now by z3ntu. If the device package happened to be installed
later, then the link would point to the wrong location.
Fixes 1d748a93dd
Allows things like podman/docker to work out of the box.
I looked at /etc/init.d/cgroups, and having this service enabled isn't a
problem if the kernel doesn't have cgroup support... in that situation,
the service script just simply exits (success).
[ci:skip-build] already built successfully in CI
The riscv64 builder in Alpine is currently stuck, let's disable the
package for riscv64 temporarily so bpo isn't stuck on it for master. I
doubt anybody is using it on riscv64 currently.
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
Co-developed-by: Jakob Hauser <jahau@rocketmail.com>
Co-developed-by: Pablo Correa Gomez <ablocorrea@hotmail.com>
[ci:skip-build]: Already built successfully in CI.
As described in [0] let's switch away from RNDIS and use NCM instead.
Since we cannot force all kernels to switch at the same time, let's keep
a fallback to RNDIS in the setup function.
We can also remove usb_f_rndis from modprobe as the module gets loaded
automatically when needed, but instead we need to load libcomposite
manually so that $configfs/usb_gadget gets created.
[0] https://gitlab.com/postmarketOS/pmaports/-/issues/1797
[ci:skip-build] already built successfully in CI
Since mkinitfs / boot-deploy install sd-boot in the ESP, it makes sense
to always trigger mkinitfs when sd-boot is upgraded so that we always
boot with the latest supported version.
[ci:skip-build]: already built successfully in CI
This shows the OS version (from /etc/os-release), e.g. "edge", on the splash
screen. os-release is a tiny text file, adding it to the initramfs doesn't seem
too bad, and having this information on the splash screen can be helpful.
Note that this uses "VERSION" and not "PRETTY_NAME" from the os-release file,
since the splash already shows "postmarketOS" (and the pretty name includes
that too), it seemed redundant and took up valuable display space.
[ci:skip-build]: already built successfully in CI
