- Enable KVM support (for using with slbounce!)
- Disable RT_GROUP_SCHED, community device kernel requirement
[ci:skip-build]: already built successfully in CI
These kernels must have NLS_ASCII set after bb6d7a05b, or else they
cannot mount the ESP as /boot and boot fails. This kconfig option will
be added to the pmb efi kconfig check so that this is caught in the
future pre-merge.
fixes 3909b1dbf and bb6d7a05b
[ci:skip-build] already built successfully in CI
Unmaintained is a name which on multiple occasions have seen lead to
confusion with people having the impression that unmaintained is for all
unmaintained devices, which is not how we're really using it. Many
devices in testing do not actually have a maintainer, yet there has been
no push to move these out of there and into unmaintained.
I think this is a result of that unmaintained was introduced not to keep
unmaintained ports but rather a place to store ports that have a better
replacement but where the inferior one still holds some sort of value,
such as for debugging purposes. These ports also are not necessarily
entirely unmaintained and see more fixes than many ports in testing.
While one approach to solving this problem could be to simply moving all
unmaintained ports to unmaintained, I think this comes with some
problems: It would require an initial effort to figure out which ports
are indeed unmaintained and which just don't have a maintained noted in
the package, and given how many ports there are in testing this would be
a big endeavour. It would also require continuous work on moving ports
into unmaintained as the maintainers go silent if we are to keep testing
and unmaintained's state consistent with reality. Additionally, just
because a port doesn't have a maintainer on paper doens't mean that
there aren't people who aren't willing to fix it up if there are issues
that arise.
As such, I think the way to go is renaming unmaintained to better
reflect the original intent. Thanks to Luca Weiss for suggesting
"archive", and to Arnav Singh for suggesting that "archived" would match
the other category names better.
Default answers to `pmbootstrap kconfig migrate` with 'y' to any
seemingly relevant Mediatek entries.
[ci:skip-build]: already built successfully in CI
Heavily based on z3ntu's work on FP5, thanks for all your work!
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
pipewire-media-session was dropped in alpine in
4dc6a181bf590339f29a279fb7c4b9ae3c26c5fa, more than one year ago, so
this should be safe
While at it, also drop pipewire dependency, that is now a dependency
of postmarketos-base-ui
pipewire-media-session was dropped in alpine in
4dc6a181bf590339f29a279fb7c4b9ae3c26c5fa, more than one year ago, so
this should be safe
While at it, also drop the dep on pipewire, since it's taken care by
pmos-base-ui now
No longer builds, can't be bothered to investigate why as the error is
unusual and I don't understand it. See issue linked below for more
detailed information.
Clsoes https://gitlab.com/postmarketOS/pmaports/-/issues/2798
[ci:skip-build]: already built successfully in CI
Device uses heimdall flash method by default, with uppercase
partition name in it's PIT file. This conflicts with flash on update,
because in Linux partitions named in lowercase. To resolve this conflict,
default flash method changed to fastboot. Heimdall still can be used with
`--method` flag: `pmbootstrap flasher --method heimdall-bootimg flash_kernel`
- enable flash on update flag.
- change default flash method to 'fastboot'
U-boot doesn't output bootscript logs, which makes it hard to debug.
Put bootscript to prebootscript section. Preboot is executed before
boot, and u-boot displays it's logs.
Enabled WiFi OOTB on some intel-based macbooks
[ci:skip-vercheck] moved devpkg fails devpkg version checks
[ci:skip-build]: already built successfully in CI
- Drop -mesa subpackage, this is handled by postmarketos-base now
- Add 'quiet' kernel cmdline param to hide kernel messages on boot by
default
- set chassis type to 'desktop'
- re-add firmware-ath6kl, this used to be included in the old
tablet-x86uefi but was accidentally dropped when that was merged into
this generic device package
- adds kconfigcheck-containers
- adds missing kconfigcheck-community options
- adds some missing dynamic debug stuff
- also adds kconfig options required by libcamera, because why not.
[ci:skip-build]: already built successfully in CI
Reserve 256MB for CMA, and of those use 192MB as VRAM.
The default value from the kernel side causes graphical issues with e.g.
phosh, so increase it so we have some more VRAM to work with.
[ci:skip-build]: already built successfully in CI
Due to Alpine packaging changes, linux-firmware-qcom is not pulled in
anymore so the GPU firmware a630_sqe.fw is missing on the device now.
Fix this by explicitly pulling in firmware-qcom-adreno-a630 which also
provides this file - based on linux-firmware.
This reverts commit 1e3d484a64
"device-pine64-pinephone: update UCM config for new headphone jack name (MR 5022)"
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
Kernel 6.8.4 has multiple issues on the pine64-pinephone:
- Incoming calls don't work reliably when the phone is suspended. ( #2734 )
- Audio routing has changed such that it's seemingly not possible to use
headphones with the builtin mic. ( #2738 )
Kernel 6.7.9 does not have these problems. This commit reverts to that for now
until they're figured out on the new kernel.
Add deviceinfo_flash_kernel_on_update="true" to the deviceinfo file.
This makes sure that the updated kernel is flashed to the device every
time the linux-postmarketos-exynos4 package is updated.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[ci:skip-build]: already built successfully in CI
Reading the wl1251 data on each boot can be useful when using the same SD card
on different devices, allowing each to fetch its correct calibration data.
Additionally, this opens up the possibility to simplify the packaging (in
follow-up commit)
Package was removed and is now included in boot-deploy.
[ci:ignore-count]: Lots of packages intentionally changed.
[ci:skip-build]: already built successfully in CI
Move goodix calibration rules to an subpackage because only the
replacement controllers are need this.
[ci:skip-build]: already built successfully in CI
Near-mainline kernel is feature-complete since quite some time, so lets
use that as a default also to simplify boot process, since downstream kernel
depends on various blobs loaded into memory by the bootloader.
Get rid of quirks required in boot process for mainline kernels
also by using a near-mainline u-boot.
Prepare for handling rev b devices.
Keep Downstream kernel to be able to optimize/compare EPD operation
The previous name stopped being valid with the kernel 6.8 upgrade. This caused
ALSA to think a headset was connected, which in turn caused callaudiod to
select the Headphones port in the PA sink instead of Earpiece / Speaker.
I missed this in my own kernel upgrade testing because I use
a custom callaudiod that doesn't care about the headphones port.
I now confirmed the issue with regular callaudiod and that this change
fixes it.
Co-authored-by: Fiona Klute <fiona.klute@gmx.de>
- usbguard config: these are builtin USB devices that should be allowed
by default
- removed nonfree-fw package, I decided that everything from that should
be required since some fairly major features are broken without these
firmwares and relevant userspace apps
- re-enabled EFI runtime services, so efifb is used (and probably other
benefits?)
- Laptops need the "Linux Boot" option enabled
- "With recent UEFI firmware efi=noruntime can be left out when
the Linux Boot option is enabled."
- https://github.com/jhovold/linux/wiki/X13s#kernel-command-line
[ci:skip-build]: already built successfully in CI
