This release includes security fixes.
Changes:
- 161e7f1ed3
- ba16d92aa0
Change-Id: Ibf3c6871cbe044f23091ccfe8a03869d38fb3851
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: Already built successfully in CI
Fixes broken fde as reported in https://gitlab.com/postmarketOS/pmaports/-/issues/2314.
Both Tianma and EBBG variant use the upstream touchscreen drivers in 6.5.
Add them to the initramfs as it was missed when upgrading to 6.5 kernel release.
[ci:skip-build] already built successfully in CI
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy Ace 4
- Samsung Galaxy Core Prime
- Samsung Galaxy Grand Prime
- Samsung Galaxy S4 Mini Value Edition
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy A3/A5/A7
- Samsung Galaxy E7
- Samsung Galaxy Grand Max
- Add support for upower, in order to enable automatic shutdown when battery is
critically low
- Set UPower PercentageLow threshold to 10% so it triggers even when fuel gauge
is not calibrated (see estimations provided in 4b54fc7f83:
"linux-postmarketos-omap: add N900 battery capacity estimation")
The display panel for these devices was upstreamed and now uses a
different name. Update it so the display is loaded properly.
[ci:skip-build]: already built successfully in CI
Provide a rough battery capacity estimation for the bq27200 fuel gauge inside
Nokia N900. This is useful when the fuel gauge is out of calibration and a
learning cycle cannot take place due to broken USB/charging port on the device.
[ci:skip-build]: Already built successfully in CI
It seems like the driver name has changed *again* in 6.5.x kernels, so
let's just have both drivers in the initramfs to help with migrating
between newer/older kernels and any future flip/flopping of drivers.
This is a bit of a hack... it works because missing modules are not
fatal for mkinitfs. The reason why they aren't fatal is that whether or
not it's builtin is somewhat arbitrary... there's an open issue[1] for
mkinitfs to make this smarter, i.e. throw an error if the .ko doesn't
exist AND it's not builtin for the *installed* kernel.
When that's implemented then this patch would likely result in mkinitfs
failing on this device because one of those drivers may not be installed
or builtin. I don't have time to implement this in mkinitfs, so adding
this crude workaround of just including both seemed like a reasonable
thing to do since the 6.5 kernel will break fde on this device (this has
happened before).
[ci:skip-build]: already built successfully in CI
- add keyboard driver to initramfs (twl4030_keypad & matrix_keymap)
- order modules in alphabetical order
[ci:skip-build]: Already built successfully in CI
Fix shutdown regression introduced with 3e737241ba ("linux-postmarketos-omap:
N900: disable twl off idle features"). After that commit, shutdown never
completes.
[ci:skip-build]: Already built successfully in CI
Disable twl pmic off-idle configuration for Nokia N900. An ugly patch to do
this was lost during the migration from linux-nokia-n900 to the shared omap
kernel.
Fixes#2161
[ci:skip-build]: Already built successfully in CI
Switch to urxvt terminal in order to provide a scrollable terminal. Scrolling
is convoluted in st [1], especially when used on a mobile device.
Scrolling is a basic need, e.g. to page through `dmesg` output.
[1] https://git.suckless.org/st/file/FAQ.html#l21
Save a few CPU cycles by dropping conky. Additionally, the existing config has
not been working for a long time now, and no one missed it.
For completeness, it was no longer displaying on the desktop. Manually starting
it showed:
```
conky: X Error: type 0 Display b5e73620 XID 1302 serial 97 error_code 10 request_code 2 minor_code 0 other Display: b5e73620
```
There are instructions [1] to resolve/workaround it, but we clearly do not have
a pressing need for conky to begin with.
[1] https://github.com/brndnmtthws/conky/issues/1443#issuecomment-1557793718
[ci:skip-build]: already built successfully in CI
The OMAP 3430 in the Nokia N900 is a uniprocessor SoC, so disable SMP via
kernel command line. This appears to alleviate the ongoing kernel crashes
affecting the Nokia N900 in pmOS.
[ci:skip-build]: already built successfully in CI
Added CONFIG_GPIO_SYSFS, this is required for nokia-modem module
GPIO_SYSFS depends on EXPERT which in turn sets DEBUG*
[ci:skip-build]: already built successfully in CI
the 6.3 kernel for this device added edt-ft5x06, but it was dropped when
upgraded to 6.4, so this reverts back to the focaltech driver so that
the touchscreen will work again in the initramfs
[ci:skip-build] already built successfully in CI
I forgot to change this before merging. Commit remains the same, so
package itself shouldn't change. Thus:
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
Since linux 6.4.0 the SDM845 kernel uses compressed kernel modules, we
need to kmod version of modprobe to handle loading these, so depend on
it.
[ci:skip-build] already built
ODROID HC2 boards are out-of-use by the maintainer.
Move to testing and remove maintainer.
[ci:skip-build] already built successfully in CI
[ci:skip-vercheck]
* modem-related modules seem partly responsible for recent l3 firewall
timeouts and kernel crashes.
* rx51-battery can be used to get battery design capacity, but not required
for general running of the system blacklist other
* modules that can impact power consumption on the N900
Completely disabling the modules in kernel config is unnecessary, since they
are all useful for some users
[ci:skip-build]: already built successfully in CI
The N900 volume keys were configured to produce F7 and F8 in Maemo Fremantle.
Set them to normal volume keys to restore expected behavior
[ci:skip-build]: Already built successfully in CI
Move the elogind configuration and post-install call of "loginctl
reload" into an extra subpackage with install_if=elogind.
Fix for:
Executing device-pine64-pinebookpro-16-r0.post-install
* service nvme-powersave added to runlevel boot
* service sysfsconf added to runlevel default
lib/apk/exec/device-pine64-pinebookpro-16-r0.post-install: line 5: loginctl: not found
ERROR: device-pine64-pinebookpro-16-r0.post-install: script exited with error 127
Make the post-install scripts more robust while at it, by adding
"exit 0" at the end.
Update some alsa buffer params to solve sound quality issues
I got working values experimentally after trying
different buffer sizes and limits and watching to pw-top
to ensure there are no errors during playback from diffrent apps and
sinks.
Contributes to #1534
- make CONFIG_DRM_DISPLAY_CONNECTOR built-in. This resolves 'slow' tty
initialization that breaks pbsplash on N900
- use CONFIG_CMDLINE_FROM_BOOTLOADER instead of CONFIG_CMDLINE_FORCE, to allow
kernel to boot with u-boot provided parameters such as
PMOS_FORCE_PARTITION_RESIZE
- upgrade to 6.3.5
[ci:skip-build]: already built successfully in CI
