Provide a rough battery capacity estimation for the bq27200 fuel gauge inside
Nokia N900. This is useful when the fuel gauge is out of calibration and a
learning cycle cannot take place due to broken USB/charging port on the device.
[ci:skip-build]: Already built successfully in CI
motorola-surnia also supports the inx panel as of Linux 6.3, add it to
the initfs so the display can be initialized early.
There is no tianma panel for surnia (only for harpia) so drop that.
It's not clear why it was there in the first place.
[ci:skip-build]: Already built successfully in CI
With the udev rule in that package feedbackd can start using the
vibration motor for haptics.
Also we can remove the direct swclock-offset dependency since the soc
package depends on that also.
[ci:skip-build]: already built successfully in CI
It seems like the driver name has changed *again* in 6.5.x kernels, so
let's just have both drivers in the initramfs to help with migrating
between newer/older kernels and any future flip/flopping of drivers.
This is a bit of a hack... it works because missing modules are not
fatal for mkinitfs. The reason why they aren't fatal is that whether or
not it's builtin is somewhat arbitrary... there's an open issue[1] for
mkinitfs to make this smarter, i.e. throw an error if the .ko doesn't
exist AND it's not builtin for the *installed* kernel.
When that's implemented then this patch would likely result in mkinitfs
failing on this device because one of those drivers may not be installed
or builtin. I don't have time to implement this in mkinitfs, so adding
this crude workaround of just including both seemed like a reasonable
thing to do since the 6.5 kernel will break fde on this device (this has
happened before).
[ci:skip-build]: already built successfully in CI
`url` and `pkgdesc` do affect the resulting package and as such
`pkgver` should be incremented, but it wasn't.
Fixes 0dfb1219f8
[ci:skip-build]: already built successfully in CI
Some change (I think some tools switching from the coreutils to busybox
versions?) subtly broke debug-shell behaviour. Try to fix it.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[ci:skip-build]: already built successfully in CI
Hides this error when FDE is *not* enabled, and ultimately skips the
block of logic for detecting the luks partition:
/init: line 437: cryptsetup: not found
This error has confused some users in the past, who were reporting
issues with the initramfs.
There's probably a minor speedup on non-FDE systems as well from
bailing early.
If a file exists in the initramfs at runtime, cpio won't overwrite it
by default when extracting the initramfs-extra archive. This adds the -u
option to cpio, to overwrite any existing files in the destination.
This is meant to fix issues where the -extra archive has an app that is
meant to replace a busybox app, busybox --install creates it in the
initramfs and gzip will skip it since it's newer than what is in the
archive.
With full-fat mdev supporting by-partlabel lookups, there is a small
delay during startup. As mdev and dynamic partitions aren't actually
needed for the framebuffer device, move show_splash earlier.
Furthermore, slightly rework setup_framebuffer to not dump the verbose
message about waiting for the framebuffer unless the framebuffer isn't
found.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
This removes the possibility that multiple resize root partition methods
could be invoked. I'm not sure how likely this is in practice, but it
seems like we should avoid the possiblity altogether.
This also adds some more helpful printing to stdout when the partition
resize is skipped / not done.
findfs might produce a block device path like /dev/dm-3, these can
change across boots and devices. Make things more readable and
consistent by mapping from the /dev/dm-* path to the equivalent
/dev/mapper/xyz path. Combined with invoking kpartx from a
/dev/disk/by-partlabel/abc symlink, this results in the final block
device having a name like /dev/mapper/userdata2 on an Android device.
Whilst this is just nicer to work with, this will be especially useful for
the upcoming ondev2 postmarketOS installer to make device-specific
configuration and detection easier.
Save the root/boot partition paths once found, and optimise a few loops.
Additionally, fall-back to other search methods when the pmos_boot or
pmos_uuid_boot cmdline args are set but fail.
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
Drop in mdev.conf and the /lib/mdev/persistent-storage script, these
cause /dev/disk/by-* to be populated in the ramdisk, making it
possible to do look up partition by-label and by-partlabel for free,
compared to findfs which can take some time.
As a first optimisation based on this, check for some partitions using
these paths and prioritise them when looking for subpartitions. Drop the
first find_boot_partition call as it doesn't really save time over the
call in the while loop.
The mdev config also handles setting up /dev/null, /dev/random, etc, so
these don't have to be done manually.
These files aren't owned by mkinitfs, or used to configure mkinitfs, so
I think it makes sense that they belong in a dir specific to this
package instead of cluttering up mkinitfs's config dirs.
Mount /dev (and /run) in initramfs so util-linux switch_root can move
the mounts over to the new sysroot before changing root.
BusyBox switch_root doesn't even attempt to move anything so use
util-linux's switch_root for this.
Explicitly disable tests too...
While a lot of Phosh development still happens on and for the Librem 5
we (thankfully) have lots of users and contributors using other devices.
Update the description to reflect that.
Ideally we'd emphasize that this is GNOME technology based and uses
wlroots but let's not make the description too long.
Instead of Purism's generic home page point the URL to phosh.mobi which
has some more details. An alternative URL would be
https://puri.sm/pureos/phosh/ but that points to a page that is a
currently a bit dated.
[ci:skip-vercheck]
[ci:skip-build] already built successfully in CI
Wrap rustc commands with sccache when building native build scripts.
More interesting will be using sscache for compiling for the target
architecture, but sccache currently refuses to cache with --sysroot.
This can be optimized further later on, get some initial support for
sccache in here first.
While at it, tweak the -vV logic to also support -V, start using semver
with this and add myself as maintainer of the package.
[ci:skip-build]: already built successfully in CI
* Don't use "cargo install", as it leads to building a second time.
* Make the build very verbose, as this package is mainly used to debug
and develop the crossdirect scripts for rust.
