Required for getting mobile data up, otherwise ModemManager fails to
connect with:
Status | connected: no
| connection error name: org.freedesktop.ModemManager1.Error.MobileEquipment.Unknown
| connection error message: failed to create net link for device: failed to add link for device: Could not allocate link: Failed to add link with mux id 1: Netlink message with transaction 27 failed
[ci:skip-build]: already built successfully in CI
Required for getting mobile data up, otherwise ModemManager fails to
connect with:
Status | connected: no
| connection error name: org.freedesktop.ModemManager1.Error.MobileEquipment.Unknown
| connection error message: failed to create net link for device: failed to add link for device: Could not allocate link: Failed to add link with mux id 1: Netlink message with transaction 27 failed
Previously, the modem firmware would be loaded from the modem partition
using this firmware loader. As of the 6.5.4 SDM670 kernel upgrade, the
firmware is installed and loaded from the firmware package. Drop the
dependency on the msm-firmware-loader, which is now unused.
Krane doesn't have a headphone jack, which caused audio server issues
for me. Add a check to only enable the headphone and headset mic device
on non-Krane boards. Also improve the formatting and remove
ChromeOS-specifc options.
[ci:skip-build]: already built successfully in CI
I was building a branch archive previously, which meant that rebuilding
would fail if someone pushed to the branch upstream (the archive
checksum would change)... so I've reverted back to building from a
specific commit for now.
pkgrel was increased because this commit includes a couple of
audio-related patches that weren't included in the previous packaging of
the 6.7 branch.
[ci:skip-build] Already build-tested on Gitlab CI
Similarly to how it was done for xiaomi-beyllium with varying
display panels, add kernel variant for clover-plus.
Mi Pad 4 Plus is very very similar to regular Mi Pad 4,
but it has different panel and different touchscreen.
Therefore it uses different device tree in kernel - and it
is the only changed line in deviceinfo file.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
[ci:skip-build]: Already built successfully in CI.
In order to make it work properly, the fcc unlock script from MM should
also be enabled... This info will be added to the device's wiki page for
now since upstream MM discourages distros from enabling these unlock
scripts by default...
fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2489
[ci:skip-build]: Already built successfully in CI.
The fbdev backend was removed with Weston 10 which has been out for a
good while now. As such, it doesn't matter whether Xwayland works or not
since Weston won't work at all --- the DRM backend, which is what would
get used instead of fbdev with this removed, won't work on downstream
kernels like the one used by this device.
[ci:ignore-count]
[ci:skip-build]: Already built successfully in CI.
The fbdev backend was removed with Weston 10 which has been out for a
good while now. As such, it doesn't matter whether Xwayland works or not
since Weston won't work at all --- the DRM backend, which is what would
get used instead of fbdev with this removed, won't work on downstream
kernels like the one used by this device.
There is no dri-backend.so. I don't know if this ever existed. May have
been a typo where the author meant to type drm-backend.so. The DRM
backend should be the default anyway, so just remove it instead of
fixing what may have been a typo.
The fbdev backend was removed with Weston 10 which has been out for a
good while now. This device should be able to use the DRM backend
anyway given that it uses the A64 SoC which also e.g. the PinePhone
uses.
Additionally, the comment about Xwayland being broken contradicts the
actual configuration file where Xwayland actually is being enabled
(xwayland=true), so this shouldn't be causing any regressions even if it
actually is broken.
The fbdev backend was removed with Weston 10 which has been out for a
good while now. As such, Weston won't work with the downstream port
anyway which is likely where Xwayland supposedly was broken. As such,
remove this unnecessary configuration file.
We did set these variables, so it is possible to flash boot and root
partitions separately for booting with stock partition table. This
is useful for U-Boot as secondary bootloader. But it's not good for
U-Boot as primary bootloader because the resulting images have boot
and root partitions separated, so users have to create partitions
themselves and this is very confusing.
I'm suggesting to disable it in favor of doing U-Boot as primary
bootloader, this may be harder for users, but it needs to be done
only once, and this way is more fancy and is supported on more
devices than secondary bootloader.
If someone still wants to use this port with U-Boot as secondary
bootloader they can do "pmbootstrap install --split" and
"pmbootstrap export" to get 2 separate partitions to flash.
[ci:skip-build]: Already built successfully in CI.
bcm4330 has 2 wifi sdio firmwares, one with IEEE 802.11а support
and one without. One without was missing which caused some
devices to have wireless network issues.
Additionally Oyua specific bluetooth firmware was found and it
is included as well.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
[ci:skip-build]: Already built successfully in CI.
Fixes#2349. Patches refreshed because some didn't apply when I built
directly from local repo and tried to import them with "git am".
Known issue: NetworkManager fails to assign IP to usb0, I had to
assign it manually to use USB networking.
In the mainline ds2482 onewire kernel driver, active_pullup defaults to
1 which is setting the APU register. This caused the connection to the
ds2784_battery slave to be unstable and flaky. In the AOSP manta project
this flag is set to 0 as well.
