The device has been renamed from fujitsu-m532 to pegatron-chagall since several rebrands of this board exist (Olivetti Olipad3, Siragon 4N, etc.), and Fujitsu M532 is just one of those.
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Ship mode via the mechanism used by purism doesn't work; it's either not
possible or outside my understanding to run an openrc runscript with a
busybox init on *poweroff* and *not reboot*, which is what is required
for this to work properly..
This module param requires a corresponding kernel patch to enable ship
mode support in the bq25890-charger module
Upstream change logs:
5.11.2:
fdc91c4e20
5.11.4:
a178aa515c
This also adds a -dev subpackage, and cleans up makedepends
[ci:skip-build]: already built successfully in CI
This does not work as expected, CI doesn't run for x86 and armhf on
master too. An attempt to fix this was made in MR 2030, but it didn't
work as expected and it's not worth looking into this further right now.
This reverts commit d695455f08.
Changes from purism:
- 2 second boot delay removed
- This includes an updated DDR memory training firmware version.
- patch to work around wifi device not being available on boot
Package changes:
- u-boot installed in location consistent with other pmaports/u-boot
packages
- update-u-boot script added for upgrading u-boot on the device
- devkit u-boot split off into a sep. subpackage
This disables ccache in the CI when building packages. I think ccache is
not necessary since the CI will never build a package twice in the same
pipeline, and ccache dir is not preserved for use between pipelines.
There is a real time cost to compiling with ccache enabled on the
initial compile (compressing objects for cache, etc), and some testing
with building the linux-purism-librem5 kernel in the CI shows this cost
can be significant... ~160 minutes when ccache is enabled vs ~105
minutes when it is disabled with this patch.
kernel compile CI runs referenced:
https://gitlab.com/postmarketOS/pmaports/-/jobs/1087602863https://gitlab.com/postmarketOS/pmaports/-/jobs/1087956999
Some testing on my laptop using osk-sdl with and without ccache for
initial compile:
ccache disabled:
$ rm _build -r && CCACHE_DISABLE=1 meson _build >/dev/null && CCACHE_DISABLE=1 time meson compile -C _build
ninja: Entering directory `_build'
[10/10] Linking target osk-sdl
7.76
$ rm _build -r && CCACHE_DISABLE=1 meson _build >/dev/null && CCACHE_DISABLE=1 time meson compile -C _build
ninja: Entering directory `_build'
[10/10] Linking target osk-sdl
7.89
$ rm _build -r && CCACHE_DISABLE=1 meson _build >/dev/null && CCACHE_DISABLE=1 time meson compile -C _build
ninja: Entering directory `_build'
[10/10] Linking target osk-sdl
7.71
ccache enabled:
$ rm /tmp/ccache _build -r && CCACHE_DIR=/tmp/ccache meson _build >/dev/null&& CCACHE_DIR=/tmp/ccache time meson compile -C _build
ninja: Entering directory `_build'
[10/10] Linking target osk-sdl
8.62
$ rm /tmp/ccache _build -r && CCACHE_DIR=/tmp/ccache meson _build >/dev/null&& CCACHE_DIR=/tmp/ccache time meson compile -C _build
ninja: Entering directory `_build'
[10/10] Linking target osk-sdl
8.46
$ rm /tmp/ccache _build -r && CCACHE_DIR=/tmp/ccache meson _build >/dev/null&& CCACHE_DIR=/tmp/ccache time meson compile -C _build
ninja: Entering directory `_build'
[10/10] Linking target osk-sdl
8.54
`qt5-qtquickcontrols` and `qt5-qtgraphicaleffects` are needed, else
qtwebbrowser shows a blackscreen on start.
[ci:skip-build]: already built successfully in CI
This includes a new librem5-base config release, the most notable change
being some mic echo cancellation changes in pulseaudio config.
Upstream changelog:
351958ffc0
Note: I did not include the upstream change to disable wifi PM. I don't
find the performance to be so bad that it's worth giving up some battery
efficiency for.
Note: the librem5-base thing from purism has a new naming/versioning
format, which is in line with some of their other projects, so the
APKBUILD has been updated to support that too
Downstream kernel is outdated and no longer maintained by us. Thus,
removed. The linux-xiaomi-beryllium-mainline kernel is removed because
its superseded by the common sdm845 kernel and is no longer needed.
Let pmbootstrap build the package in the native chroot. This is
important for the v21.03 branch, which needs to ship its own
cross-embedded toolchain, as the one from Alpine is only in testing and
therefore not available in the Alpine v3.13 branch that pmOS v21.03 is
based on. By using the native branch, it is enough to build the
cross-embedded toolchain for x86_64, and we can avoid qemu related
errors when attempting to build it for arm architectures.
As a nice benefit, this makes compilation of the package faster on edge,
too.
[ci:skip-build]: already built successfully in CI
The previous implementation of this caused upower to select a thing
called 'flash_strobe' in the L5, which doesn't operate like a
flashlight. This changes the detection logic to look at the suffix, on
the pinephone the device ends in ':flash', and on the L5 it ends in
':torch'.
fixed#967
This patch is in purism's fork and it removes messages like this when
starting upower on the librem5 by properly detecting/setting the type:
TI:15:11:12 did not recognise USB path /sys/devices/platform/soc@0/30800000.bus/30a20000.i2c/i2c-0/0-003f/power_supply/tps6598x-source-psy-0-003f, please report
...
TI:15:11:12 did not recognise USB path /sys/devices/platform/soc@0/30800000.bus/30a50000.i2c/i2c-3/3-006a/power_supply/bq25890-charger, please report
This adds a new subpackage that installs dependencies and configures the
smartcard reader on the librem 5. Some setup is required before this
will work (e.g. upgrading reader firmware), the L5 wiki page will have
this information.
The pcsc init script was forked into this package to allow for powering
on the reader *before* the service started. Doing this in a separate
init script would have caused the reader to power on regardless of
whether the pcsc service was set to start, which is not desirable since
it should *only* be powered on when pcsc is starting
So far the debug-shell in initfs works. The device uses dynamic
partitions, so that has to be figured out to get a proper rootfs.
One thing to look out for is that mount_subpartitions task in initfs
hangs, so pmos_boot=sth was added to kernel cmdline to skip it. This is
also related to dynamic partitions, anyway.
[ci:skip-build] Already built on CI
