Add a vibration feedback, along with the LED feedback when booting.
This is suggested by TL Lim.
When trying to power up the phone with holding it in the hand, vibration
feedback is more obvious than LED.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Started porting pmOS to Xiaomi Redmi Note 5 Pro (whyred).
What works so far:
- Booting
- SSH over USB
- SD card detection (haven't tried flashing to internal storage because
i'm afraid of bricking the device due to anti-rollback)
- Vibration and LEDs
- Screen
- Hardware buttons
- Touchscreen
Untested:
- WiFi
- Camera
- Audio
- Bluetooth
- GPS
- Calls, SMS, Cellular network
The point of this program was to have something to play with once weston
boots up. It does not make sense to ship this with
postmarketos-ui-plasma-mobile.
Related: postmarketos-demos#1
At the moment the function does not handle all cases correctly.
For example, it cannot say which package was changed when a file
in a subdirectory of a package was changed.
This is used e.g. in device-samsung-golden:
device-samsung-golden
├── APKBUILD
├── deviceinfo
├── downstream
│ ├── init-usb-hook.sh
│ ├── module-config.conf
│ └── modules-load.conf
└── kwin.sh
At the moment, changing a file under "downstream" would attempt
building a "downstream" package, instead of device-samsung-golden.
Refactor the function a bit to walk up the directory hierarchy,
until we find an APKBUILD.
For APKBUILD linting we care only about APKBUILD files that were changed,
not to which package they belong or whatever.
The "with_directory" option of get_changed_packages() really meant
"just give me changed files", which means that we can just use
get_changed_files() instead.
All users of get_changed_files() check if the file was removed,
so it seems like most of them do not need files that were removed.
Also, there is no need to have files listed twice,
so we should return a set instead of a list.
It seems that the .gitlab-ci.yml did not trigger properly when the file
was changed last time, and now it does in this MR. Fix the file to make
it pass.
- Proper WiFi support (building modules, firmware package)
- Architecture change to armv7
- Fix no MAC address on USB networking
[ci:skip-build]: already built successfully in CI
The datasheet says that the AT+QDAI audio routing configuration is saved
to non-volatile memory directly, and therefore needs a modem reset to be
applied.
This commits changes the audio routing configuration script to first
check for the current configuration, and only change it if it is
different from the one wanted.
The new configuration is then sent, and modem is reset to apply
configuration.
Do not run upstream compatibility checks whenever pushing to master.
This is confusing, because if the upstream compatibility check fails,
then it appears that the last patch was broken in some way although it
isn't related.
I've moved the upstream compatibility checks to a separate repository
already, and added a badge to the pmaports gitlab project that indicates
whether they are currently succeding or not. The checks run hourly now.
Related: https://gitlab.com/postmarketOS/monitoringFixes: #457
The pkgrel bump in !1032 got lost during a rebase, rebuild the package to fix:
ERROR: Could not find dependency 'modem-qcom-msm-mainline-common' in any aports folder or APKINDEX.
The pkgrel bump in !1032 got lost during a rebase, rebuild the package to fix:
ERROR: Could not find dependency 'modem-qcom-msm-mainline-common' in any aports folder or APKINDEX.
The pkgrel bump in !1032 got lost during a rebase, rebuild the package to fix:
ERROR: Could not find dependency 'modem-qcom-msm-mainline-common' in any aports folder or APKINDEX.
Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD
with mainline and downstream subpackages.
Enable rmtfs service here instead of directly in the package.
[ci:skip-vercheck]: for qrtr version fix
- use supervise-daemon to restart when necessary
- run normally, without wrapping with sh and logger
- add "need qrtr-ns" to make sure it gets started first
- stop enabling service directly in rmtfs package
(moved to msm-modem)
- Fix version
- Rename init script to qrtr-ns ("nameservice") to clarify which
service is actually started
- Use supervise-daemon
- Configure and start daemon in one command (no need for qrtr-cfg)
- Remove "before qcom_rmtfs": it should depend on qrtr-ns,
not the other way around
- Do not activate qrtr daemon by default - this should happen automatically
if other service files have "need qrtr-ns"
