Kconfig changes:
* Enable PWM_CLK and INPUT_PWM_VIBRA instead of INPUT_CLK_VIBRATOR for
Nexus 5
* Disable unused clock drivers
* Disable MEDIA_SUPPORT - currently unused
* Enable LEDS_TRIGGER_PATTERN for feedbackd
* Disable all of NET_VENDOR_* (which is Ethernet devices)
[ci:skip-build]: already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
[ci:skip-build]: already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
Depend on soc-qcom-msm8953-modem and initramfs.
Add necessary modules to initfs for fix touchscreen under fde.
[ci:skip-build]: already built successfully in CI
This release includes security fixes.
Changes:
- 161e7f1ed3
- ba16d92aa0
Change-Id: Ibf3c6871cbe044f23091ccfe8a03869d38fb3851
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: Already built successfully in CI
It add necessary modules to intramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed in favor of
soc-qcom-msm8953-initramfs.
[ci:skip-build] already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to intramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
pointercal, fb.modes, 30-gpu-firmware-files has been removed.
Utilize msm-firmware-loader for minimize device specific
firmware package.
Add necessary modules to initramfs for fix fde.
Use soc-qcom-msm8953-modem and soc-qcom-msm8953-initramfs as a dependency.
ERROR: the source file 'WCNSS_qcom_wlan_nv.bin' has different checksums in the following files:
- device/testing/firmware-samsung-j5/APKBUILD: 742ee81d034116cf1ecdfae5f75495e6b10ce5be0c2a999b6c8a2c161b1da8b48d6810d5405edb8c829b96fdf75e45a565c74963c76d1bca4aaedf28572fa91f
...
Fix this by setting a different target filename in the package you modified:
https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#source
[ci:skip-build]: already built successfully in CI
Now that the modem firmware is installed in the referenced location, the
firmware patch is not needed, so remove that as well.
Also backport a fix for the Pixel 3a XL so a kernel upgrade isn't needed
for that.
Fixes broken fde as reported in https://gitlab.com/postmarketOS/pmaports/-/issues/2314.
Both Tianma and EBBG variant use the upstream touchscreen drivers in 6.5.
Add them to the initramfs as it was missed when upgrading to 6.5 kernel release.
[ci:skip-build] already built successfully in CI
htc-memul needs a special build with a different scratch address set. So
generalize the build function so we can make multiple builds with
parameters without duplicating too much code.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Adjust the trigger script to only check for the new deviceinfo path. The
purpose of this check is to make sure that a full device package is
installed, and only in that case run mkinitfs. Otherwise, it will fail
because e.g. no kernels may be installed.
With recent changes, /etc/deviceinfo is a part of devicepkg-utils and
only /usr/share/deviceinfo/deviceinfo really indicates that a device
package is installed.
Remove the "exit 0" at the end while at it, it did not do anything since
the script runs with "/bin/sh -e". Add a comment to make this clear.
[ci:skip-build]: already built successfully in CI
Previously, every device package would package its own /etc/deviceinfo
file, generating a conflict with every other device package. In a
previous commit we have moved the path to /usr/share/deviceinfo, but
we still want to install a sample "/etc/deviceinfo" file to guide
users on how to use the new features. This has the additional benefit
that there is only one of those files in the whole distro. However,
there is no dependency ordering between the device packages and
devicepkg-utils, so there's no warranty of which will be installed
first. Therefore, to avoid a conflict on most likely every user
upgrade, we use postmarketos-mvcfg.
