The p? is not redundant. Without it, the p in mmcblk0p2 for example does
not get cut off, meaning the resulting device is not "mmcblk0" but
"mmcblk0p". My bad, sorry for the breakage.
Fixes: 9f6600ba ("main/postmarketos-mkinitfs: rm pmOS_deleteme")
Fixes: 9d86f6fe ("main/postmarketos-mkinitfs: resize: unallocated space check, even if forced")
Remove the "pmOS_deleteme" partition left behind by the on-device
installer, if it exists. Let the existing resize_root_partition() extend
the root partition over the newly gained space (and rest of the storage
device) right afterwards.
In resize_root_partition(), put the unallocated space check into an
extra function has_unallocated_space(). Run it even if
PMOS_FORCE_PARTITION_RESIZE is used, so we don't attempt to resize the
partition if there is no free space.
While at it, change "sed 's/p?2$//'" to "sed 's/2$//' in an already
modified line, because it means the same thing and is less confusing
(? in regex means: 0 or 1 time).
Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using
aes-xts-plain64 as default cipher for cryptsetup (override with
"pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940).
I have executed "pmbootstrap kconfig edit" on each kernel, and manually
toggled the option. The diff is not always clean, because for some
kernels it is apparently the first time, that menuconfig was executed on
the configs like that. In a few instances, it turned out that
CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is
already a requirement, but as the config was incomplete, it was not
visible that this option was enabled). Very few times, I had to enable
CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS.
It would be great if we could automate such mass kconfig edits in the
future, see pmbootstrap#1942.
[skip ci]: I have verified, that every single one of these kernels builds.
CI will likely run out of time while downloading source tarballs.
Seems like "pmbootstrap kconfig edit" causes unrelated kernel config
changes for some reason (probably because pmbootstrap does not install
a cross compiler for it). For now let's just edit the config manually
with the new options so everything else stays as-is.
Only add a comment, do not try to mount the root or boot partitions
anymore. The initramfs is doing this already.
Related: https://postmarketos.org/fstab
Mount the boot partition at /sysroot/boot and keep it mounted, when
running the switch_root command. This way, OpenRC doesn't need to mount
it and possibly use the wrong partition. The OpenRC service does not use
the same logic to find the boot partition, in particular it does not
support the pmos_boot kernel parameter.
While at it, print the mountpoint and read-only/read-write arguments in
the mounting log message for both root and boot.
Fixes: #664
Get rid of the "write_unless_modified" code, which was supposed to only
change /etc/fstab, /etc/issue, /etc/motd if the user did not modify it.
This is nice in theory, but we have a bug report where the code did not
do what it should (apk audit possibly failed due to a qemu bug?), and
then it lead to strange bugs related to not having the expected
/etc/fstab installed.
Fixes: #661, #258
This enables mult-sensor support in sun6i-csi, support for the
gc2145 front camera, the new panel driver from mainline linux
and a small fix for the anx7688 that prevents it spamming the
kernel log when no cable is plugged in on 1.2a hardware.
gitlab.com had a service disruption, so it was not possible to "git
clone" from gitlab.com from some regions, like where the sourcehut
infrastructure is located. Since we are building our packages on
builds.sr.ht, this caused all packages that should be built at that time
to fail. It is working again, so bump the pkgrels to restart the builds.
This switch has happened in the Alpine repos quite a while ago and most
of the pmOS packages were using it already too, so let's switch over the
last ones as well.
This also cleans up the APKBUILDs where necessary
In the Linux kernel, the ST-Ericsson NovaThor U8500 SoC is barely
ever mentioned under the "NovaThor" name, more common are names like
U8500, Ux500, ST-Ericsson, STE, ...
Let's rename the kernel package to linux-postmarketos-stericsson
to make that more clear. Also cleanup the APKBUILD a bit while we're
at it, HOSTCC is unneeded, remove unnecessary depends, ...
We cannot have two of them at the same time, most compiler would fail here
but for some reason our didn't.
However, it's better to just use one (the new one, or the old one). Enable
CONFIG_RTL8723CS_NEW, which is the new driver that made it to pine64
kernel since 5.5.
Signed-off-by: Danct12 <danct12@disroot.org>
[ci:skip-build]: already built successfully in CI
We should disable it by default and let the user to enable it
when they want it.
And currently it's causing problems where the backlight would
go very dark with it enabled on PinePhone.
Signed-off-by: Danct12 <danct12@disroot.org>
This release gets rid of the hacks needed for out-of-tree modules in the
previous version of calamares.
[ci:skip-build]: already built successfully in CI
This makes recording system audio very simple and feasible in a cross-device
manner since application-logic can always rely / forward ALSA audio to the
loopback device instead of a device-specific audio interface.
We are in the midst of the Linux 5.8 merge window so there is no new
-rc version to rebase on. -rc1 next week is also not the perfect choice
for a release (first rc is usually still a bit unstable).
On the other hand the changes that landed the last few days are quite
nice and ready to go, so I decided to rebase on a stable kernel release
(5.7.1). Not sure if I'm ever going to do this again :)
Changes:
- Update to Linux 5.7.1
- bq-paella: Add sound and modem
- Enable some new kernel options for DB410c
dbus-launch doesn't get installed automatically. On the other hand,
dbus-run-session does. This version ensures that dbus is also launched
for the graphical demos
Disable modules for hardware that's impossible to connect to the
allwinner devices or older than the 90's this shrinks the size from 380
to 250MB.
Then it enables module compression so it shrinks from 250MB to 57MB.
Then the module stripping was enabled, shrinking it to 20MB
[ci:skip-build]: already built successfully in CI
* Support for sharp ls052t3sx02 video mode panel and max1187x
touchscreen used in Sony Xperia Z2 (sirius)
* Support for display in OnePlus One (bacon)
* Support for touchscreen, touchkeys and notification led in Samsung
Galaxy S5 (klte)
At the moment we have Contributor: lines on some packages (but not all of them),
but often they don't represent the actual contributors to the package very well.
E.g. when we added them retroactively to the device packages we only added
the initial contributor (which isn't necessarily the person
who made most of the work for a device...)
The Git history is the most representative source for figuring out
who contributed to a package, so there is no reason to duplicate that
into the APKBUILD.
[skip ci]: way too many packages
fixes the desktop file:
* add -- to make cage ignore kodi's arguments
* add --standalone to kodi's arguments
update the dependencies:
* add upower as kodi tries to communicate with it to read battery status
* add pulseaudio as kodi complains it is missing
* add elogind as it is required for cage to run
* remove xorg-server
Fixes#469
