It seems like the driver name has changed *again* in 6.5.x kernels, so
let's just have both drivers in the initramfs to help with migrating
between newer/older kernels and any future flip/flopping of drivers.
This is a bit of a hack... it works because missing modules are not
fatal for mkinitfs. The reason why they aren't fatal is that whether or
not it's builtin is somewhat arbitrary... there's an open issue[1] for
mkinitfs to make this smarter, i.e. throw an error if the .ko doesn't
exist AND it's not builtin for the *installed* kernel.
When that's implemented then this patch would likely result in mkinitfs
failing on this device because one of those drivers may not be installed
or builtin. I don't have time to implement this in mkinitfs, so adding
this crude workaround of just including both seemed like a reasonable
thing to do since the 6.5 kernel will break fde on this device (this has
happened before).
[ci:skip-build]: already built successfully in CI
`url` and `pkgdesc` do affect the resulting package and as such
`pkgver` should be incremented, but it wasn't.
Fixes 0dfb1219f8
[ci:skip-build]: already built successfully in CI
Some change (I think some tools switching from the coreutils to busybox
versions?) subtly broke debug-shell behaviour. Try to fix it.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[ci:skip-build]: already built successfully in CI
Hides this error when FDE is *not* enabled, and ultimately skips the
block of logic for detecting the luks partition:
/init: line 437: cryptsetup: not found
This error has confused some users in the past, who were reporting
issues with the initramfs.
There's probably a minor speedup on non-FDE systems as well from
bailing early.
If a file exists in the initramfs at runtime, cpio won't overwrite it
by default when extracting the initramfs-extra archive. This adds the -u
option to cpio, to overwrite any existing files in the destination.
This is meant to fix issues where the -extra archive has an app that is
meant to replace a busybox app, busybox --install creates it in the
initramfs and gzip will skip it since it's newer than what is in the
archive.
With full-fat mdev supporting by-partlabel lookups, there is a small
delay during startup. As mdev and dynamic partitions aren't actually
needed for the framebuffer device, move show_splash earlier.
Furthermore, slightly rework setup_framebuffer to not dump the verbose
message about waiting for the framebuffer unless the framebuffer isn't
found.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
This removes the possibility that multiple resize root partition methods
could be invoked. I'm not sure how likely this is in practice, but it
seems like we should avoid the possiblity altogether.
This also adds some more helpful printing to stdout when the partition
resize is skipped / not done.
findfs might produce a block device path like /dev/dm-3, these can
change across boots and devices. Make things more readable and
consistent by mapping from the /dev/dm-* path to the equivalent
/dev/mapper/xyz path. Combined with invoking kpartx from a
/dev/disk/by-partlabel/abc symlink, this results in the final block
device having a name like /dev/mapper/userdata2 on an Android device.
Whilst this is just nicer to work with, this will be especially useful for
the upcoming ondev2 postmarketOS installer to make device-specific
configuration and detection easier.
Save the root/boot partition paths once found, and optimise a few loops.
Additionally, fall-back to other search methods when the pmos_boot or
pmos_uuid_boot cmdline args are set but fail.
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
Drop in mdev.conf and the /lib/mdev/persistent-storage script, these
cause /dev/disk/by-* to be populated in the ramdisk, making it
possible to do look up partition by-label and by-partlabel for free,
compared to findfs which can take some time.
As a first optimisation based on this, check for some partitions using
these paths and prioritise them when looking for subpartitions. Drop the
first find_boot_partition call as it doesn't really save time over the
call in the while loop.
The mdev config also handles setting up /dev/null, /dev/random, etc, so
these don't have to be done manually.
These files aren't owned by mkinitfs, or used to configure mkinitfs, so
I think it makes sense that they belong in a dir specific to this
package instead of cluttering up mkinitfs's config dirs.
Mount /dev (and /run) in initramfs so util-linux switch_root can move
the mounts over to the new sysroot before changing root.
BusyBox switch_root doesn't even attempt to move anything so use
util-linux's switch_root for this.
Explicitly disable tests too...
While a lot of Phosh development still happens on and for the Librem 5
we (thankfully) have lots of users and contributors using other devices.
Update the description to reflect that.
Ideally we'd emphasize that this is GNOME technology based and uses
wlroots but let's not make the description too long.
Instead of Purism's generic home page point the URL to phosh.mobi which
has some more details. An alternative URL would be
https://puri.sm/pureos/phosh/ but that points to a page that is a
currently a bit dated.
[ci:skip-vercheck]
[ci:skip-build] already built successfully in CI
Wrap rustc commands with sccache when building native build scripts.
More interesting will be using sscache for compiling for the target
architecture, but sccache currently refuses to cache with --sysroot.
This can be optimized further later on, get some initial support for
sccache in here first.
While at it, tweak the -vV logic to also support -V, start using semver
with this and add myself as maintainer of the package.
[ci:skip-build]: already built successfully in CI
* Don't use "cargo install", as it leads to building a second time.
* Make the build very verbose, as this package is mainly used to debug
and develop the crossdirect scripts for rust.
A welcoming application. It can be extended with custom pages which
we'll do later for a pmOS specific page, but for now it at least tells
the user a bit about Plasma
[ci:skip-vercheck]
Add an initial port for the Fairphone 5 smartphone. This includes
firmware and close-to-mainline kernel package.
[ci:skip-build]: Already built successfully in CI
Fix a bug where find_dtb() would fail if find encounters any errors,
even if it correctly found the dtb.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
With IPA active, the device hangs shortly after booting into the rootfs
(the initramfs shell is fine as far as I can tell). Blacklisting it
works around this for now.
This is a regression, and did not happen when the device originally was
introduced.
[ci:skip-build]: already built successfully in CI
With IPA active, the device hangs shortly after booting into the rootfs
(the initramfs shell is fine as far as I can tell). Blacklisting it
works around this for now.
This is a regression, and did not happen when the device originally was
introduced.
In some cases, the dispatcher script fails if unudhcpd is already running.
Forcefully killing unudhcpd resolves the issue.
Fixes#2267.
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
[ci:skip-build]: already built successfully in CI
With the recent changes in commit 80fff9242, it's possible that the
client IP address is customized. Use the same code as in
init_functions.sh to get the this potentially customized IP address to
use for the nbd-client.
[ci:skip-build]: already built successfully in CI
With the recent changes in commit 80fff9242, there's no longer an $IP
variable we can use. Use the same code as in init_functions.sh to get
the potentially customized IP address to use for telnet.
