1. Set deviceinfo_flash_offset_base to 0x00000000.
2. Enable deviceinfo_bootimg_qcdt, and make dt.img for it.
Directly use zImage instead of zImage-dtb for smaller boot.img size.
3. Reduce kernel size by disable xz, lzma and bz2 compressing.
4. Update kernel to the last version in LineageOS repository.
Please note that it is ONLY TESTED on XT1079 "thea", aka Moto G 2014 LTE.
However, "thea" and "titan" are nearly identical, sharing same kernel
and defconfig on LineageOS, etc.
[ci:skip-build]: already built successfully in CI
Nokia only provides .zip files without any git history, so I had to
download the kernel git repo for 3.18.79 and then apply all downstream
changes as one singular commit to preserve at least some of the history.
My previous PC had big problems with creating patch files for symlinks
so I added some commits that should have been in patchfiles instead.
This merge request fixes that, leaving in repo just 3.18.79+downstream
patches and all my patches as patchfiles inside aports.
[ci:skip-build]: already built successfully in CI
- main: postmarketos-mkinitfs: Add /run
Create the /run directory in the initramfs so that cryptsetup doesn't
crash on not being able to create /run/cryptsetup for lockfiles
- device: pine-dontbeevil: Remove workaround for touchscreen
- main: linux-postmarketos-allwinner: Implemented supplies for touchscreen
This uses a slightly newer commit from the kernel repo that implements
requesting a regulator in the touchscreen driver
- device: pine-dontbeevil: Remove ethernet from initramfs
This actually makes debugging more complicated since networkmanager wont
touch the ethernet adapter afterwards and the initramfs can be debugged
over uart
- temp/u-boot: sync APKBUILD with upstream and update to 2019.04
- main: linux-postmarketos-allwinner: Use 20190521 git version
This port uses the Android bootloader (kernelflinger) instead of
Gummiboot or rEFInd,... just in case if people still want to easily
reflash Android later without going through some DNX Fastboot, Intel
Flash Tool blah blah.
Chuwi violates GPLv2 by not releasing the kernel sources of Android to
the public. This port uses Linux mainline (5.1-rc7), and almost
everything works properly, so thankfully we don't have to use the 3.10
kernel which is outdated and EOL.
[ci:skip-build]: kernel takes more than an hour to compile on CI.
ollieparanoid made sure that everything builds.
Make the display work, set virtual_size and add
msm-fb-refresher and 0001-fix-video-argb-setting.patch.
[ci:skip-build]: already built successfully in CI
Fix missing symlink for the first driver in mv_dri() (caused by "shift"
at the wrong position). Build freedreno for arm only, not for all
arches.
Lima is for rendering and sun4i-drm (part of kmsro) for the display, so
split it into its own subpackage and use it in device-pine-*.
[ci:skip-build]: ollieparanoid made sure, that this builds. This won't
finish in time in CI.
temp/mesa: enable mesa-dri-lima subpackage
temp/mesa: add a fix for Wayland on Lima
temp/mesa-purism-gc7000: update to latest Git and try to resolve conflicts with mesa
temp/mesa: switch version to 19.1.0-rc1
device/device-pine-a64lts: add mesa and mesa-dri-lima to depends
device/device-pine-dontbeevil: add mesa to depends
device/device-purism-librem5dev: remove now defunct mesa-purism-gc7000-dri-imx from depends
temp/mesa*: re-add X11 support
temp/mesa-purism-gc7000: fix build error which for some reason didn't cause problems earlier
temp/mesa*: fix X11 DRI symlinks
This is the beginning of a port to the the LG devices with the codename
vee7e, the one i have is the LG-P710 but according to the xda forum
there are some others, so if someone could test those that would be
nice.
I have not done any work besides making the kernel build and checking if
it boots so there still are some rather obvious issues but it boots and
has working USB-networking as well as a partially working screen and
touchscreen.
[ci:skip-build]: already built successfully in CI
device is very similar to samsung-gts210vewifi (SM-T813),
just has additional LTE modem.
Have to use gcc6 for kernel compilation, otherwise get
'Unhandled fault: alignment fault (0x96000061) at 0xffffff8001787f4c'
errors on kernel startup, and device always reboots.
[ci:skip-build]: already built successfully in CI
* Add support for osk-sdl
* Use latest commit from bitrvmpd
* Add udev rules, scripts for charging led
* Add (hacky) udev rule for jack detection
* Add pulseaudio files
* Silence substream kernel messages
* Change charging script path
* Move adsp-audio dependency to firmware to avoid watchdog
[ci:skip-build]: already built successfully in CI
Install msm-fb-refresher, it's needed for the screen to refresh.
Update the kernel to a new commit with several patches applied to fix
the touchscreen - before it wasn't working properly.
Switch architecture from armhf to armv7.
[ci:skip-build]: already built successfully in CI
This rebases the Pixel 3 XL patches on top of current
linux master branch (5.1-rc7 + a few more commits since then)
Also enabled KASLR in the defconfig.
[ci:skip-build]: this kernel takes more than one hour to build.
The phone boots postmarketOS and shows logo.
USB networking and flashing via fastboot works.
Display is currently broken but I will try to fix it soon.
[ci:skip-build]: already built successfully in CI
* Moved more PinePhone related kernel stuff to the upstream
* Added cma=256M so the CSI subsystem doesn't throw out-of-memory errors
when capturing at higher than 1280x720 resolutions (but it still hangs)
* Removed a lot of modules that get compiled for DVB tuners after
enableing the camera stuff.
[ci:skip-build]: doesn't finish in time
* Inverted the X-axis on the touchscreen
* Enabled the driver for the wifi/bluetooth chip and added it to the dts
* Added a horrible hack for making the touchscreen work
This also decreases the kernel version because the previous version I've
used was technically incorrect.
[ci:skip-build]: doesn't finish in time
device-xiaomi-santoni:
* Added initial audio support (generated by xml2ucm)
* Fixed splash screen size (720x1280), which also fixes the screen
showing "posma"
firmware-xiaomi-santoni:
* Firmware files are added (contains ADSP and WCNSS firmwares), these
* files are from Developer ROM 03/29 by Xiaomi.
linux-xiaomi-santoni:
* Kernel updated to 3.18.138.
* Modernized GCC, it'll now compile with the latest GCC from Alpine.
[ci:skip-build]: already built successfully in CI
This package was a workaround for out-of-tree modules (wireguard). We
have dropped the wireguard kernel module package already, and since
kernel-scripts is failing to build now (it would need to be updated),
let's drop it as well.
If somebody wants to bring back *and maintain* the wireguard
out-of-tree kernel module, I've documented how we had done it here:
https://wiki.postmarketos.org/wiki/Out-of-tree_kernel_modules
[ci:skip-build]: building the kernels that have been adjusted to drop
kernel-scripts related code would take too long for CI,
but I'm making sure that everything still builds before
merging.
* fix patch file names and reorder them properly
* add patch to fix framebuffer memory allocation
* add patch to fix compile warning for iptables plugin xt_connbytes
* add patch to properly assign MAC address for USB RNDIS
* add backport patch from upstream about O_PATH file descriptors
[ci:skip-build]: already went through successfully in CI
@drebrez originally based klte port on lineage-16.0 branch (Android 9),
but we need compatibility with Android 7.1, so use lineage-14.1 branch.
Also tidy up downstream kernel config a little bit (pass it through
pmbootstrap kconfig edit, change nothing, exit with saving).
* Created seperate DTB for the devkit named sun50i-a64-dontbeevil.dts so
it can easily be edited and the diff remains readable in gitlab
* Added patch to build the new dtb
* Added the ST LIS3MDL to the new dtb (Magnetometer)
* Added the SensorTek STK3335 to the new dtb (Proximity and ambient
light sensor)
* InvenSense MPU-6050 to the new dtb (Accelerometer and gyroscope)
* Added CSI bus and OV5640 camera
Remaining issues:
* The STK3310 module doesn't load automatically
* Camera doesn't want to capture but does show up as /dev/video0
[ci:skip-build]: doesn't finish in time
This patches the path that the kernel tries to load the Wifi chip's
firmware from. If someone with an Galaxy S7 Edge would test this -
although I have no reason to believe that it would not work on the Edge
- then this patch could also be applied to the linux-samsung-hero2lte
package.
[ci:skip-build]: already built successfully in CI
With this patch the power button (the one you use to turn it on)
suspends the device. This should allow to save more energy with respect
to just turning the screen off (slider button).
I tested myself on Nokia N900.
[ci:skip-build]: already built successfully in CI
This is basically just the packages for the Galaxy S7 Edge (hero2lte).
I only needed to change a few Kernel config options, so that the
colors are displayed correctly. The options regarding
CONFIG_PANEL_S6E3HF4_WQHD and CONFIG_PANEL_S6E3HA3_DYNAMIC probably
solve this issue, but I modified the other options as well. I got the
differences by diffing:
arch/arm64/configs/exynos8890-{hero2lte,herolte}_defconfig
Booting, USB networking and the display work! I can't say anything about
flashing via heimdall as this tool scares me. Following what WilliamO7
wrote on the device page, I flashed it by sideloading the android
recovery zip.
[ci:skip-build]: already built successfully in CI
UART and SSH work and HDMI works in u-boot (just like the pine-a64lts).
It should work now with display and xorg/weston works directly after
installing. Plasma mobile doesn't work directly because both kms and
fbdev are enabled and kms doesn't work yet.
linux-postmarketos-allwinner: update to 5.0.0-rc3 with patches for this
devkit, tested on this device and on pinea64lts (the only other device
using the allwinner kernel).
[ci:skip-build]: won't finish in time
usb networking works
echo 100 > /sys/devices/platform/msm_fb.590593/leds/lcd-backlight/brightness
cat /sys/devices/virtual/graphics/fb0/modes > /sys/devices/virtual/graphics/fb0/mode
to get screen working
[ci:skip-build]: already built successfully in CI
This device is x86_64 and has a 32-bit UEFI, so I need to install
32-bit grub (AFAIK it's the only bootloader capable of loading a 64-bit
kernel from 32-bit).
The grub-efi-x86 package has been generated with pmbootstrap.
The problem behind swapped red and blue is inverted byte order in
framebuffer driver pixel format.
This patch sets the correct byte order in the framebuffer driver,
solving the swapped red and blue problem.
[ci:skip-build]: already built successfully in CI
Initial starting point to get the device booting. The downstream kernel
repository can be improved, see discussion in the merge request.
[ci:skip-build]: already built successfully in CI
device-xiaomi-santoni: use mdss-fb-init-hack to refresh the display, and
swapfile to fix "out of memory" when loading proprietary blobs.
I have tested the kernel, USB Networking, Display, USB OTG, Wi-Fi (with
proprietary blobs) works fine, through I haven't figured out how to get
Bluetooth and among of other stuff to work. Audio works. For more
information on how to get Wi-Fi and Audio to work, check out the wiki
page for this device, I have updated it.
[ci:skip-build]: already built successfully in CI
The problem behind swapped red and blue is inverted byte order in
framebuffer driver pixel format.
This patch sets the correct byte order in the framebuffer driver.
The previous workaround patch is removed because it fixes improperly
the red-screen issue, causing the swapped red and blue problem
that this commit solves
[ci:skip-build]: already built successfully in CI
- Initial memory frequency scaling driver
- Enable eMMC 1.8v DDR signaling mode
- Limit CPU frequency to avoid overheating
- Fix crash in xf86-video-opentegra driver
[ci:skip-build]: already built successfully in CI
Also hardcode st instead of i3-sensible-terminal, because the font
parameter may not work with all terminals, and we want to use st on the
n900 anyway.
Rename the firmware so it's clear that it's specific to the platform and
not only the amami device. Sony rhine platform includes as follows:
Xperia Z1 (honami)
Xperia Z1 Compact (amami)
Xperia Z Ultra (togari)
This changes the librem5dev package to depend on the new
mesa-purism-gc7000 packages, which provide support for the vivante
gc7000 GPU in this device.
[ci:skip-build]: already built successfully
Makes dhcp work on mainline and downstream kernel.
Disables p2p0 on downstream kernel. This isn't working on either kernel
anyways. It breaks wifi on the downstream kernel.
Thanks to Robert Yang's pmbootstrap patch, we can now avoid flashing
anything to the boot and recovery partition of the Ouya. With this
patch, the latest pmbootstrap will refuse to do so with:
ERROR: 'boot' partition is blacklisted from being flashed! See the Ouya device wiki page for more information.
Applied red screen kernel patch as described in:
https://wiki.postmarketos.org/wiki/Troubleshooting:display
Effectively fixes the red screen on Weston. Added msm-fb-refresher to
APKBUILD to fix display refreshing.
The display now works properly in Weston, but unfortunately the screen
is blue in Plasma Mobile, and X11 crashes in XFCE.
[ci:skip-build]: already built successfully in CI
Updated the device-asus-grouper package to use devicepkg-dev.
I've tested the resulting image and it builds, boots and has a working
touchscreen (in Weston)
I've also noticed that the device reboots itself at times, both in the
USB ssh console and in Weston. This seems to be a known issue but I
don't know how prevalent it was before.
I don't know why build fails on gitlab, I have not changed anything
in kernel. Anyway, I don't remember why I enabled this, so I guess it's safe
to disable this option.
- Bluetooth is now working
- Audio works too (speaker/headphones/earpiece/mic - internal and headset)
- Keyboard layout for X11
- Xorg config for rotated screen
- Suspend issues fixed (tested on MATE)
- OTG bindings updated - not working yet
I didn't get it to work with NetworkManager, but it does work with
connman. Disable Kineto GAN, which caused various commands to misbehave
(just like it did on the htc-ace).
[ci:skip-build]: already built successfully in CI
This is tested to boot on google-crosshatch, following these
instructions:
$ pmbootstrap init, choose the mainline kernel
$ pmbootstrap install --no-fde
$ pmbootstrap initfs hook_add debug-shell
(enter fastboot mode on the device)
$ fastboot set_active a
$ fastboot flash dtbo_a ~/.local/var/pmbootstrap/chroot_rootfs_google-crosshatch/boot/dtbo-google-crosshatch-mainline.img
$ pmbootstrap flasher boot
And you should get telnet after a while. This kernel takes a long time
to build, so [skip ci]. I can confirm it builds locally.
Note that this patch adds the mainline dtb path to deviceinfo. But the
parameter gets ignored on the downstream kernel, so it's fine to keep it
in the shared deviceinfo.
Mainlining this device is work in progress, details at:
https://gitlab.com/postmarketOS/pmaports/issues/153
This makes the linux-postmarketos-stable kernel generate an armv7 package instead of armhf. The contents
of the package were armv7 already but now it can be correct with the new Alpine support.
When working on Librem5 devkit we had issue with touchscreen driver not
probing fast enough and taking ~70 seconds to finish initialization.
Touchscreen driver for the Librem5 devkit uses goodix driver, roughly
speaking device initialization is done in following sequence,
- start kernel and load driver
- attempt to request firmware
- if no firmware is found use defaults value
- initialize touchscreen
Now, on Librem 5 no firmware is provided (of course!) which makes 2nd
step 4 step process,
- attempt to load firmware at initramfs level
- fail, wait for it userspace to finish loading
- userspace attempts to load firmware
- fail and tell kernel to stop looking for firmware.
Step 2 to 4 is done after udev is loaded in userspace, which easily
takes 40-50 seconds. Since Purism Librem 5 devkit is never going to have
userspace level firmware, it is safe bet to disable this altogether.
[skip ci] tested locally and this is going to take more then hour on CI
and fail
Since a recent kernel update enables the LCD display, this
uses a dts that allows the lcd to function, but drops support
for usb host (since purism does not have an all-in-one dts
yet)
[skip ci]: already built successfully in CI
