Fixes:
- flash_android_bootimg: check validate target partition size before flashing (MR 63)
- copy target dtb to a temp directory for qcom and sprd dt.img types (MR 57)
Other:
- ci: add integration test for exynos qcdt (MR 57)
- ci: switch to unpackbooting from osm0sis (MR 57)
[ci:skip-build] already built successfully in CI
pma!5000 added a new implicit dependency on libinput, because it
specified libinput files in the initramfs file hook. mkinitfs considers
it fatal if it cannot find files listed in a file hook.
Later this could be 'optimized' by adding a -libinput subpkg and an
`install_if=libinput-libs` to add this file hook so it's not installed
everywhere... but the size increase isn't too much for UIs.. someone can
do this later.
> libinput-libs-1.26.0-r0 installed size:
> 476 KiB
This fixes a missing dependency problem where a UI (e.g. "none") doesn't
normally depend on libinput, and mkinitfs would fail because these files
were missing.
mdev is slow and missing features, it also requires that we load all the
modules that we include at once making the boot process slower.
udev is required for unl0kr (and buffyboard), it can also load modules
on demand (and asynchronously). Making the boot process considerably
faster on devices, especially for generic images where we have lots of
drivers for different display panels in the initramfs.
Additionally, import full fat modprobe from the kmod package, this is
required to support compressed modules.
This brings us more in line with other distros and generally improves
compatibility.
If devices use broken kernel modules which don't correctly define
modalias', these drivers may not be loaded by udev. This should be fixed
by defining the missing modalias statements in the driver.
This also runs udev earlier in the init, so that display drivers are
loaded before the splash in case they are needed.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
This incorprates the debug-shell functionality directly into the
initramfs, so it's no longer necessary to build and boot a custom
initramfs in order to debug your device.
Additionally, the behaviour of the debug-shell is entirely reworked, It
now creates an ACM serial gadget which can be accessed via any normal
terminal emulator (picocom, minicom, etc; or PuTTY on windows). Rather
than just invoking sh, the debug-shell now creates a respawning getty on
both the new virtual console and the active console (this will either be
the UART console or tty0/1).
It is necessary to spawn these shells via getty since the logging rework
means we can no longer assume that stdin/out/err reference a TTY.
In addition to the above, it is now possible to trigger a log dump by
holding volume up during boot. This can be useful for helping users
debug their devices if the issue doesn't result in a failure that can be
detected in the initramfs.
With these changes, the console-shell and debug-shell hook packages are
reduced to only adding the additional tools/features. console-shell is
still required for fbkeyboard, and debug-shell for the setup_usb_storage
tool.
Co-Developed-by: Clayton Craft <craftyguy@postmarketos.org>
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
For some reason globbing doesn't work properly for empty directories,
adjust the check in run_hooks to ensure the directory both exists and
contains something, otherwise we get an error about
"/hooks-cleanup/*.sh" not existing.
/ # mkdir blah
/ # for x in blah/*; do echo $x; done
blah/*
/ # touch blah/beep
/ # for x in blah/*; do echo $x; done
blah/beep
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
I somehow hit a case where this wasn't installed and
/lib/mdev/persistent-storage wasn't available. Let's just explicitly
depend on mdevd...
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
This step is the most likely to go wrong or have issues, and it has side
effects which can make it difficult to run multiple times on one boot.
Move it to after hooks so that e.g. when dropping to a debug shell, we
land before the first call.
This also makes booting to hooks a faster in many cases.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
fallocate seems to cause some strange behaviour where the logs.img file
is treated like it's empty. Given it's small and in a ramdisk let's just
create it with dd instead.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
This fixes the annoying "sh: write error" and "Couldn't write to clear
UDC" messages that happen on every single boot.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Rework logging to always log the initramfs output to the kernel
ringbuffer and deprecate PMOS_NO_OUTPUT_REDIRECT in favour of following
the kernel loglevel.
I know it seems silly to use syslogd for this, but it's necessary to
buffer writes to /dev/kmsg per-line if we want to correctly set the log
level, and "tee" does not do this (it will write multiple lines at once,
resulting in "<14>" prints in the ringbuffer). The main advantage to
this is that we won't have kernel logs cut in half by initramfs logs
anymore, everything will be nicely line buffered!
The previous logging solution of multiple "tail" commands would actually
fail to log up to the last few lines before a crash due to how tail
works (it polls the file and buffers lines).
I attempted something like this before, but I stopped after running into
ratelimiting issues. These are now resolved by configuring the
printk_devkmsg sysctl.
Dropping PMOS_NO_OUTPUT_REDIRECT:
The general motivations behind PMOS_NO_OUTPUT_REDIRECT was to avoid
cluttering up the console with initramfs logs when they aren't wanted;
this is now handled instead by the kernels logging facility. We log to
the ringbuffer at LOGLEVEL_INFO, so if "quiet" is specified on the
cmdline (or the loglevel is otherwise set above info) then initramfs
logs will also not be shown.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
We plan to make a lot of changes to the initramfs which will require
incresaing the size. There are some devices that have literally no free
space for this, so make a -minimal initramfs fork that can continue to
support those while we update the regular initramfs.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
papers is now in community in alpine, and is the GTK4
replacement. Current main version (still not available in alpine),
fits phone screens, but makes sense to change it already now.
Relates #1479
[ci:skip-vercheck] changes are in pmb_recommends
[ci:skip-build]: already built successfully in CI
And configure any modem to be able to use it, so that we can keep
controlling things like bluetooth headsets, and take phone calls from a
car.
[ci:skip-build]: already built successfully in CI
This allows users to test out pipewire audio on phosh. Currently the
default audio backend is pulseaudio. This is configured in pmos-base-ui.
fixes#2013
[ci:skip-build]: already built successfully in CI
I have noticed a bug. Because is some cases, uuid for the boot partition is set, it won't reach logic for the stowaway.
[ci:skip-build]: already built successfully in CI
Latest release of "old" lk2nd.
Release notes:
- msm8974 improvements
- New variants for few Samsung devices, some renames
- Added Lenovo Vibe K5 variants
New devices:
- Vivo Y21L
- Motorola Moto G 4G
- Huawei G7 Plus
- Samsung Galaxy On7 2015 (SM-G600FY)
- HTC One M8
- Samsung G360T
Added big patch to fix compile errors with gcc-14.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
[ci:skip-build]: already built successfully in CI
Add postmarketos-artwork-wallpapers to _pmb_recommends, so Sxmo shows
the postmarketOS wallpaper.
Related: https://todo.sr.ht/~mil/sxmo-tickets/602
Related: pmaports issue 2499
[ci:skip-build]: already built successfully in CI
Set the postmarketOS wallpaper as default for Plasma Mobile and Plasma
Desktop, so we can change it across all UIs with every postmarketOS
release.
It would be nice if we could just set the wallpaper with a simple config
file (reported https://bugs.kde.org/show_bug.cgi?id=487816). Until that
is possible, use a shell script as workaround.
Copy the contents dir and metadata.json file explicitly, instead of
copying the entire "meadow" directory. With this change we avoid copying
meadow.svg, which fixes two issues:
* This file doesn't have a stable name, when we switch to the next
wallpaper and the user had selected it, the wallpaper will just be
gone instead of automatically switching to the new wallpaper.
* It shows up as broken wallpaper in Plasma's wallpaper selection.
[ci:skip-build]: already built successfully in CI
- Add support for systems with merged /usr (MR 39)
- Improve support for deviceinfo format (MR 52)
- Add support for systemd (MR 51)
- Document archive compression formats/levels (MR 50)
[ci:skip-build] already built successfully in CI
- fix NM unit name
- relocate an errant -openrc pkg
- remove iio-sensor-proxy from service autostart on systemd, it appears
that this is dbus activated (inspected the .service file, no `Install`
section and using dbus directive)
This allows the audio switching backend stuff to work on all UIs (see
!5072 / 87d355e08). For example, users of any UI can switch audio
backends by installing one of the pmos-base-ui-audio-* metapackages.
[ci:skip-build] already built successfully in CI
- Merge pulseaudio and audio-pulse subpkgs
Just general cleanup, there's no reason to have a separate pulseaudio
subpackage now since both were being installed anyways (one indirectly
depended on the other)
- Add 'none' option for audio backend
Some users might not want to have an audio backend installed taking
up disk space. For example they're running a headless server or just
don't want audio I/O, and PA + dependencies, which include mesa(!!)
can be a lot... I measured 208MB
Note about drop the pulseaudio subpkg and it's "provides="...
This was done in 6e325417, when pmos-base-ui was split off from
pmos-base (3 years ago). I'm not sure how many people are still rocking
a 3yo pmOS install, but the original package (see 92e43e83) was only
pulled in by install_if, so I think the chance that it's in someone's
world file would be really really low.
Sxmo maintainers have decided to stay with OpenRC on postmarketOS. Set
this option, so pmbootstrap doesn't even ask the user if they want to
install Sxmo with systemd. The idea is that users don't end up
reporting issues about this unsupported use case.
Allow this package to be used on systemd installs without pulling in a
bunch of openrc services.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
Not sure if dropping the networkmanager-openrc dependency causes issues.
Otherwise, make the elogind subpackage conflict with systemd-logind.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
For installing openrc-specific dependencies, specifically
nftables-openrc which is needed because the post-install enables the
openrc service and expects the initd script to be available then
[ci:skip-build] already built successfully in CI
All these config update are there since 2021. Having them there
serves no purpose, apart from increasing packaging complexity and
have some unnecessary files under /etc
All these config update are there since 2020. Having them there
serves no purpose, apart from increasing packaging complexity and
have some unnecessary files under /etc
