- Set fixed commit in "source" line to avoid future problems if some
change is pushed to the repository
- Add pmb:cross-native to build natively since these are just a few
copy operations
- Remove some unneeded `cd "$srcdir"` lines
- Avoid installing venus.mbn since this is just a combined version of
venus.mdt + venus.b*
- Split -wcnss subpackage into -wcnss and -wcnss-nv to allow replacing
the WCNSS firmware with a newer version from firmware-qcom-db410c
- Provide "firmware-qcom-msm8916-wcnss" to still allow switching to
the original firmware if wanted
- Install only WCNSS_qcom_wlan_nv.bin for aarch64 since the other
configuration files are only needed for downstream (armv7)
The WCNSS firmware from DB410c is also useful for other devices
that can run unsigned firmware (e.g. bq-paella) because it is newer
and reportedly has some WiFi/BT coexistence problems fixed.
To allow easy switching betwen the original firmware from the manufacturer
(firmware-bq-picmt-wcnss) and the newer firmware (firmware-qcom-db410c-wcnss)
we make both packages provide a virtual "firmware-qcom-msm8916-wcnss"
package. The newer version from firmware-qcom-db410c gets a higher
provider_priority so it is installed by default.
However, the user can choose to do "apk add firmware-bq-picmt-wcnss"
to get the original firmware from the manufacturer instead.
The DB410c is a SBC with APQ8016 SoC. It runs on mainline without
any patches. This port makes use of the existing linux-postmarketos-qcom-msm8916
kernel package that is used for other mainline MSM8916 devices.
Tested functionality:
- USB Network, USB Host (e.g. an USB keyboard)
- Flashing (Fastboot)
- Display (HDMI)
- WiFi/BT
- GPU
- Audio (HDMI)
- FDE
Not tested:
- GPS
Note: The firmware package is called firmware-qcom-db410c (instead of arrow)
because the firmware is provided directly by Qualcomm, not Arrow.
At the moment we have Contributor: lines on some packages (but not all of them),
but often they don't represent the actual contributors to the package very well.
E.g. when we added them retroactively to the device packages we only added
the initial contributor (which isn't necessarily the person
who made most of the work for a device...)
The Git history is the most representative source for figuring out
who contributed to a package, so there is no reason to duplicate that
into the APKBUILD.
[skip ci]: way too many packages
linux-samsung-kminilte: adjust paths where the bcmdhd driver expects firmware
device-samsung-kminilte: add "nonfree-firmware" subpackage
firmware-samsung-kminilte: new package
firmware post-install actions:
- enable "deferred-initcalls" in sysinit for wlan0 to be available
- force wpa_supplicant to use wlan0 instead of p2p0
(both based on script from device-samsung-klte package)
[ci:skip-build]: already built successfully in CI
- Proper WiFi support (building modules, firmware package)
- Architecture change to armv7
- Fix no MAC address on USB networking
[ci:skip-build]: already built successfully in CI
This commit adds support for the Alcatel OneTouch Pop 7S (pop7lte),
a 2014 MSM8226-based tablet, using manufacturer's downstream kernel.
Currently working: display, USB networking, Weston
Firmware is packaged for WiFi and audio but the downstream kernel tree
doesn't seem to include drivers for the qcom wlan chip, only wcnss.
Additionally, audio mixer config is missing as I haven't been able to
find it in the stock Android 4.2.x ROM's filesystem yet.
Please note that this commit adds support *only* for model P330X,
which is not to be confused with similarly-named incompatible devices,
the Pop 7 (also 2014 w/ MT8312) and the Pop 7 LTE (2016 w/ MSM8909).
Signed-off-by: Lauren Kelly <lauren.kelly@msn.com>
Adds samsung-matissevewifi support using msm8916-mainline/linux kernel.
- Device can boot.
- USB network is working.
- Can connect to device using SSH.
This adds basic functionality for the Moto One Hyper.
The device boots with rootfs on sd, booted by 'pmbootstrap flasher boot'.
USB net works, and i can ssh in. There is no framebuffer device, but
weston works with the drm backend instead of fbdev. Touchscreen support
is not implemented yet, but i will update this with support when i get
the chance. Most other functionality either does not seem to work yet or
has not been tested (wifi, audio, modem, etc).
v2:
- Also switch firmware/firmware-asus-flo
- fix linting warnings
device/linux-asus-flo/APKBUILD: IC:[AL6]:device/linux-asus-flo/APKBUILD:36:prefix custom variable with _: HOSTCC="${CC:-gcc}"
IC:[AL6]:device/linux-asus-flo/APKBUILD:37:prefix custom variable with _: HOSTCC="${HOSTCC#${CROSS_COMPILE}}"
IC:[AL6]:device/linux-asus-flo/APKBUILD:39:prefix custom variable with _: ksrcdir="$srcdir/linux-$pkgver"
MC:[AL5]:device/linux-asus-flo/APKBUILD:10:variable set to empty string: depends=""
MC:[AL5]:device/linux-asus-flo/APKBUILD:13:variable set to empty string: install=
MC:[AL5]:device/linux-asus-flo/APKBUILD:30:variable set to empty string: subpackages=""
MC:[AL31]:device/linux-asus-flo/APKBUILD:36:variables must not have capital letters
MC:[AL31]:device/linux-asus-flo/APKBUILD:37:variables must not have capital letters
MP:[AL32]:device/linux-asus-flo/APKBUILD:3:unnecesary usage of braces: ${_flavor}
MP:[AL32]:device/linux-asus-flo/APKBUILD:4:unnecesary usage of braces: ${_flavor}
MP:[AL32]:device/linux-asus-flo/APKBUILD:32:unnecesary usage of braces: ${pkgver}
firmware/firmware-asus-flo/APKBUILD: MC:[AL28]:firmware/firmware-asus-flo/APKBUILD:12:literal integers must not be quoted
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:15:unnecesary usage of braces: ${_url_aosp}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:15:unnecesary usage of braces: ${_version_broadcom}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:16:unnecesary usage of braces: ${_url_aosp}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:16:unnecesary usage of braces: ${_version_qcom}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:22:unnecesary usage of braces: ${_commit_other}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:24:unnecesary usage of braces: ${_commit_other}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:24:unnecesary usage of braces: ${_url_other}
Signed-off-by: David Heidelberg <david@ixit.cz>
