Anton Bambura
177f0a772d
google-trogdor: disable dhcp (MR 5266)
2024-06-22 00:14:04 +03:00
Anton Bambura
078c961ab3
google-snow: disable dhcp (MR 5266)
2024-06-22 00:14:04 +03:00
Anton Bambura
f768d8bf92
google-peach: disable dhcp (MR 5266)
2024-06-22 00:14:03 +03:00
Anton Bambura
d148012b0c
google-oak: disable dhcp (MR 5266)
2024-06-22 00:14:03 +03:00
Anton Bambura
63507230a3
google-kukui: disable dhcp (MR 5266)
2024-06-22 00:14:03 +03:00
Anton Bambura
e7cdce2217
google-gru: disable dhcp (MR 5266)
2024-06-22 00:14:02 +03:00
Clayton Craft
c862361087
oem-intel: add i915 DMC fw to initramfs (MR 5237)
...
Intel >=gen9 GPUs require DMC firmware to support some runtime low power
states, it's loaded when i915 starts so let's make sure it's in the
initramfs.
Also see: https://www.kernel.org/doc/html/latest/gpu/i915.html#dmc-firmware-support
[ci:skip-build] already built successfully in CI
2024-06-21 10:08:50 -07:00
Clayton Craft
2364d0a6f8
device-generic-x86_64: support macbook keyboards in the initramfs (MR 5248)
...
[ci:skip-build] already built successfully in CI
2024-06-21 10:06:45 -07:00
adamthiede
e8b3544997
device-google-oak: depend on postmarketos-initramfs-minimal (MR 5259)
2024-06-20 18:12:47 -05:00
Brian Cole
2e4ef2b276
device-google-kukui: depend on minimal initramfs (MR 5246)
...
[ci:skip-build]: already built successfully in CI
2024-06-19 08:47:48 -07:00
Stefan Hansson
68af03bdf5
device-samsung-m0: depend on minimal initramfs (MR 5241)
...
This device has a small boot partition (8 MB). The big initramfs
won't fit.
2024-06-18 22:39:53 +02:00
Clayton Craft
54ef5cdf15
device-*: depend on initramfs-minimal for devices with small boot (MR 5000)
...
[ci:ignore-count]
2024-06-18 12:35:05 -07:00
Anton Bambura
432cc88ff9
google-x64cros: add firmware for ASUS Chromebox 3 NC356U (MR 5229)
...
Fixes WiFi on this device.
[ci:skip-vercheck]: the changes are only for _pmb_recommends
2024-06-13 15:52:09 +02:00
Sicelo A. Mhlongo
5e03ad2817
device-nokia-n900: fix sxmo lock state (MR 5228)
...
commit 933f2b5703
("device-nokia-n900: improve sxmo-dwm support [MR 5227]")
accidentally removed sxmo lock state initialization. Restore the lock state
initialization
2024-06-12 16:07:42 +02:00
Sicelo A. Mhlongo
f888ffee55
device-nokia-n900: fix packaging for upower (MR 5227)
...
170189393b
(device-nokia-n900: add upower support and config (MR 4397) added
an upower config, but did not provide a subpackage to actually install it on
device. Add the needed subpackage.
[ci:skip-build]: already built successfully in CI
2024-06-12 10:30:30 +02:00
Sicelo A. Mhlongo
933f2b5703
device-nokia-n900: improve sxmo-dwm support (MR 5227)
...
(1) the deviceprofile differs from upstream 1.16.3 in the following respects:
(a) -export SXMO_NO_KEYBOARD=1 - allow use of the virtual keyboard
(b) +export SXMO_DMENU_LANDSCAPE_LINES="10"
+export SXMO_DMENU_PORTRAIT_LINES="6" - these two adjust the size of the
displayed dmenu menu.
* NB: All foregoing changes are already merged in sxmo-utils master.
(c) +export SXMO_TOUCHSCREEN_ID="TSC2005 touchscreen" - allows sxmo to
reliably toggle touch screen's enabled status
* The foregoing change is awaiting acceptance by upstream.
(2) The start hook differs from upstream 1.16.3 by the removal of the line that
starts conky. That program pegs N900 CPU usage at 100% all the time. This
change is not upstreamable, at least not for the time being
2024-06-12 10:25:59 +02:00
Mighty
65679fec40
linux-postmarketos-omap: upgrade to 6.9.3 (MR 5216)
...
* Use upstreamed power controller for espresso
Related issue: https://gitlab.com/postmarketOS/pmaports/-/issues/2825
* Include patch for iio-rescale logic
Related: https://lore.kernel.org/all/20220524075448.140238-1-linus.walleij@linaro.org/
* Enable CONFIG_NLS_ASCII
Related: https://gitlab.com/postmarketOS/pmaports/-/issues/2874
* espresso-common: Remove twl6030 import and use upstreamed clk32kg for wlan
[ci:skip-build]: already built successfully in CI
Tweaked-By: Oliver Smith <ollieparanoid@postmarketos.org>
2024-06-10 19:56:01 +02:00
Alexandre Marquet
ef8e2d0e02
device-samsung-manta: load ds2482 module at boot (MR 5205)
...
With the current kernel, ds2482 w1<>i2c module is not automatically
loaded at boot, which prevents loading the ds2784 battery module.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
[ci:skip-build]: already built successfully in CI
2024-06-09 16:20:07 +02:00
Caleb Connolly
647f2bc640
linux-postmarketos-qcom-sdm845: upgrade to 6.9.0-r2 (MR 5212)
...
This fixes op6 display panel support, drm error spam in dmesg, and
various other minor things.
It also enabled dynamic debugging and ftrace.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-08 18:57:39 +02:00
Pablo Correa Gómez
9dd4479136
linux-postmarketos-qcom-sc7180: depend on postmarketos-installkernel (MR 4681)
2024-06-06 23:30:19 +02:00
Pablo Correa Gómez
ddfa8a9124
linux-postmarketos-mediatek-mt8173: depend on postmarketos-installkernel (MR 4681)
2024-06-06 23:30:18 +02:00
knuxify
2e654e1cbb
firmware-samsung-midas: drop lt01 firmware (MR 5185)
...
The lt01 firmware will be moved to a separate package.
2024-06-04 23:38:40 -07:00
Clayton Craft
158247240f
device-lenovo-21bx: add usb module to initramfs (MR 5189)
...
These modules are required in the initramfs when booting a kernel that
builds them as modules (i.e. not builtin)
[ci:skip-build] already built successfully in CI
2024-06-01 16:34:52 -07:00
Caleb Connolly
eff1586b5c
linux-postmarketos-qcom-sdm845: depend on python3 (MR 5188)
...
Since 6.10-rc1 python3 is now a hard requirement to compile the kernel,
it's used to generates headers for drm/msm. Add it now so our CI can
keep working.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-05-31 13:50:33 +02:00
Clayton Craft
d163a56a66
community/lenovo-21bx: move to community (MR 5156)
...
[ci:skip-vercheck]
[ci:skip-build] already built successfully in CI
2024-05-27 13:30:13 -07:00
Adam Thiede
006256a0d0
linux-postmarketos-mediatek-mt8173: upgrade to 6.9.2 (MR 5179)
...
[ci:skip-build]: already built successfully in CI
2024-05-27 08:50:10 +02:00
Luca Weiss
fe27e85609
firmware-fairphone-fp4: upgrade to 20240313 (MR 5170)
...
And remove the compatibility symlinks again, all kernels running now
should use the .mbn files already.
[ci:skip-build]: already built successfully in CI
2024-05-24 15:46:27 +02:00
Barnabás Czémán
c30b0adb4d
linux-postmarketos-qcom-msm8953: update to 6.9.1-r1 (MR 5167)
...
Update kernel to the latest release.
[ci:skip-build]: already built successfully in CI
2024-05-22 16:16:30 +02:00
Pablo Correa Gómez
982799b9a8
device-nokia-n900: add postmarketos-mvcfg to depends (MR 5085)
...
Since it's been removed from postmarketos-base. In the process, also
reorder the dependencies
[ci:skip-build]: already built successfully in CI
2024-05-21 10:16:27 +02:00
Barnabás Czémán
dfee3e4365
msm8953: remove gpu firmwares from initfs (MR 5114)
...
Remove gpu firmwares from initfs,
panel drivers work fine without them.
[ci:skip-build]: already built successfully in CI
2024-05-20 15:43:50 -07:00
Barnabás Czémán
c5b6c5397a
linux-postmarketos-qcom-msm8953: upgrade to 6.9.1-r0 (MR 5132)
...
[ci:skip-build]: already built successfully in CI
2024-05-19 13:32:56 +02:00
Barnabás Czémán
feaa0e9471
soc-qcom-msm8953: update UCM configs (MR 5132)
...
Update alsa ucm configs to the latest commit.
2024-05-19 13:32:54 +02:00
Dylan Van Assche
2c6d302a13
firmware-shift-sdm845: use new hexagonrpcd paths and drop board-2.bin (MR 5151)
...
Adjust the sensor firmware paths for hexagonrpcd 0.3.1.
Also drop board-2.bin file which is now upstream and use upstream mba.mbn
and wlanmdsp.mbn.
[ci:skip-build]: already built successfully in CI
2024-05-18 14:10:23 +02:00
Joel Selvaraj
c461e9ed35
device-shift-axolotl: ship hexagonrpcd conf (MR 5151)
...
Which specify path to new sensor firmware location needed by hexagonrpcd.
2024-05-18 14:10:23 +02:00
Joel Selvaraj
deed403153
linux-postmarketos-qcom-sdm845: upgrade to 6.9.0 (MR 5099)
...
Contains fix for Poco F1 display issue when booting and enables sensor
support for Poco F1.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
2024-05-18 09:41:41 +02:00
Joel Selvaraj
9026187fe1
device-oneplus-fajita: ship hexagonrpcd conf (MR 5099)
...
Which specify path to new sensor firmware location needed by hexagonrpcd.
2024-05-18 09:41:41 +02:00
Joel Selvaraj
1761c761b2
device-oneplus-enchilada: ship hexagonrpcd conf (MR 5099)
...
Which specify path to new sensor firmware location needed by hexagonrpcd.
2024-05-18 09:41:41 +02:00
Robert Eckelmann
1eb794e124
device-xiaomi-beryllium: add sensor support (MR 5099)
2024-05-18 09:41:41 +02:00
Dylan Van Assche
694fefda45
firmware-oneplus-sdm845: use new hexagonrpcd paths and drop board-2.bin (MR 5099)
...
Adjust sensor firmware paths for hexagonrpcd 0.3.1.
Also drop board-2.bin file which is now upstream.
2024-05-18 09:41:40 +02:00
Dylan Van Assche
dbf2e96893
firmware-xiaomi-beryllium: add sensor firmware and drop board-2.bin (MR 5099)
2024-05-18 09:41:40 +02:00
Luca Weiss
26d72af07f
linux-postmarketos-qcom-sm6350: upgrade to 6.9.0 (MR 5139)
...
[ci:skip-build]: already built successfully in CI
2024-05-17 16:33:34 +02:00
Clayton Craft
0c1113b3ec
linux-*: enable NLS_ASCII for kernels that support EFI boot (MR 5136)
...
These kernels must have NLS_ASCII set after bb6d7a05b
, or else they
cannot mount the ESP as /boot and boot fails. This kconfig option will
be added to the pmb efi kconfig check so that this is caught in the
future pre-merge.
fixes 3909b1dbf
and bb6d7a05b
[ci:skip-build] already built successfully in CI
2024-05-16 22:48:41 -07:00
Adam Thiede
f78a7fd8c5
linux-postmarketos-mediatek-mt8173: upgrade to 6.9 (MR 5125)
...
Default answers to `pmbootstrap kconfig migrate` with 'y' to any
seemingly relevant Mediatek entries.
[ci:skip-build]: already built successfully in CI
2024-05-14 22:36:15 +02:00
Sicelo A. Mhlongo
8d570a7847
linux-postmarketos-omap: upgrade to 6.9.0 (MR 5127)
...
[ci:skip-build]: already built successfully in CI
2024-05-14 09:06:29 +02:00
Pablo Correa Gómez
59eecf22ec
soc-qcom-sdm845: drop wireplumber subpackage (MR 5091)
...
It's now a dependency of pmos-base-ui
2024-05-08 11:16:47 -07:00
Clayton Craft
c0b5f13420
{main,community}/linux-*: unset CONFIG_RT_GROUP_SCHED (MR 5088)
...
fixes #2652
[ci:skip-build] too many kernels to build, CI will never finish
[ci:ignore-count]
2024-05-06 10:24:48 -07:00
Clayton Craft
c349549b48
device-generic-x86_64: add fw-b43xx to recommends (MR 5081)
...
Enabled WiFi OOTB on some intel-based macbooks
[ci:skip-vercheck] moved devpkg fails devpkg version checks
[ci:skip-build]: already built successfully in CI
2024-05-02 10:49:17 -07:00
Clayton Craft
eab8911810
firmware-b43xx: new aport (MR 5081)
...
Added straight into community because it'll be used by the
generic-x86_64 device package
2024-05-02 10:49:13 -07:00
Clayton Craft
dde8b6439d
generic-x86_64: move from testing (MR 5066)
...
Fixes #2598
2024-05-02 10:44:45 -07:00
Clayton Craft
8e10f4dadd
community/firmware-ath6kl: move from testing (MR 5066)
2024-05-02 10:43:26 -07:00
Luca Weiss
7615c6e0d2
device-fairphone-fp4: depend on missing GPU firmware (MR 5078)
...
Due to Alpine packaging changes, linux-firmware-qcom is not pulled in
anymore so the GPU firmware a630_sqe.fw is missing on the device now.
Fix this by explicitly pulling in firmware-qcom-adreno-a630 which also
provides this file - based on linux-firmware.
2024-04-30 09:13:41 +09:00
Sicelo A. Mhlongo
10fd1b4e3e
device-nokia-n900: drop nonfree_firmware subpackage (MR 5050)
...
Drop the nonfree_firmware package now that pmboostrap commit aa594b76fa
("pmb.config: do not prompt for nonfree fw/userland") is merged
2024-04-20 23:26:24 +09:00
Sicelo A. Mhlongo
ea25bc48d7
device-nokia-n900: unconditionally fetch wl1251 nvs on each boot (MR 5050)
...
Reading the wl1251 data on each boot can be useful when using the same SD card
on different devices, allowing each to fetch its correct calibration data.
Additionally, this opens up the possibility to simplify the packaging (in
follow-up commit)
2024-04-20 23:26:07 +09:00
Adam Thiede
fbd92700e6
linux-postmarketos-mediatek-mt8173: upgrade to 6.8.7 (MR 5051)
...
[ci:skip-build]: already built successfully in CI
2024-04-20 13:31:10 +02:00
Stefan Hansson
86c77a7a38
device: remove references to postmarketos-update-kernel (MR 5045)
...
Package was removed and is now included in boot-deploy.
[ci:ignore-count]: Lots of packages intentionally changed.
[ci:skip-build]: already built successfully in CI
2024-04-20 11:15:33 +02:00
Stefan Hansson
2af44f93f7
device: remove references to postmarketos-update-depthcharge-kernel (MR 5045)
...
Package was removed and is now included in boot-deploy.
2024-04-20 11:15:33 +02:00
Barnabás Czémán
295ea8ae74
device-xiaomi-daisy: move calibration to subpackage (MR 5040)
...
Move goodix calibration rules to an subpackage because only the
replacement controllers are need this.
[ci:skip-build]: already built successfully in CI
2024-04-18 15:07:26 +02:00
Caleb Connolly
19ac4f599b
linux-postmarketos-qcom-sdm845: upgrade to 6.9-rc4 (MR 5036)
...
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
[ci:skip-build]: already built successfully in CI
2024-04-16 20:19:22 +03:00
WeirdTreeThing
3365d5764c
device-google-x64cros: depend on alsa-ucm-conf-cros (MR 5020)
...
[ci:skip-build]: already built successfully in CI
2024-04-11 16:14:17 -07:00
WeirdTreeThing
b383c20a51
alsa-ucm-conf-google-kukui: drop in favor of alsa-ucm-conf-cros (MR 5020)
2024-04-11 16:14:17 -07:00
WeirdTreeThing
e5efdcf862
alsa-ucm-conf-cros: new aport (MR 5020)
2024-04-11 16:14:17 -07:00
WeirdTreeThing
082f26f72d
linux-postmarketos-mediatek-mt8183: upgrade to 6.6.25 (MR 5019)
...
[ci:skip-build]: already built successfully in CI
2024-04-10 16:40:19 +02:00
Sicelo A. Mhlongo
730c56ed35
community/device-nokia-n900: x11: integrate screenshot utility (MR 5014)
...
Take screenshots in any x11 UI by depressing the camera key while keeping the
proximity sensor covered
This is a variation of [1] and [2] from postmarketOS/pmaports!4133 .
[1] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4133/diffs?commit_id=35007eaefd0e471634c74aad9294234ceed260ae
[2] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4133/diffs?commit_id=0ef9ffe3928313b7afc5ce68ad0ec4487f1f2f11
Co-Authored-By: DvaMishkiLapa <thesame.personal@gmail.com>
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>
2024-04-10 22:40:37 +09:00
Sicelo A. Mhlongo
e3b33d613b
wl1251-cal: build only for armv7 (n900) (MR 5017)
...
The tool is Nokia N900-specific, so no need to build for all archs
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
2024-04-09 17:49:36 +02:00
Anton Bambura
ee5fec6b29
soc-qcom-sdm845: upgrade ucm configs to the latest commit (MR 5013)
2024-04-08 12:39:07 +02:00
Sicelo A. Mhlongo
a61c3a3e48
device-nokia-n900: i3wm: use volume keys for audio and display brightness (MR 5012)
...
Volume keys adjust alsa volume, and Shift + volume keys adjusts display
brightness.
This is a variation of [1] and [2] from from postmarketOS/pmaports!4133 .
[1] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4133/diffs?commit_id=a060096b4abe8b614e9ae11aff29f133aa4486b9
[2] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4133/diffs?commit_id=968293603a3d55d1380fdff34d4c89d8bcd00bda
Co-Authored-By: DvaMishkiLapa <thesame.personal@gmail.com>
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>
[ci:skip-build]: already built successfully in CI
2024-04-07 13:33:00 +02:00
Barnabás Czémán
95a9e93450
device/msm8953*: Generate extlinux.conf (MR 4999)
...
Genearete extlinux.conf for msm8953 make ability switch to new lk2nd seamlessly.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
2024-04-05 18:25:19 +02:00
Gianluca Boiano
b4d3cf3d71
linux-postmarketos-qcom-msm8953: upgrade to 6.8.2-r0 (MR 4987)
...
[ci:skip-build]: already built successfully in CI
2024-04-05 17:58:40 +02:00
Luca Weiss
314a161a86
soc-qcom-sdm845: align pipewire script formatting (MR 5006)
...
Replace some stray tabs in the file with spaces, as is used by the other
half of the file.
[ci:skip-build]: already built successfully in CI
2024-04-05 17:54:16 +02:00
adamthiede
5ac004cf65
linux-postmarketos-mediatek-mt8173: upgrade to 6.8.4 (MR 5005)
...
[ci:skip-build]: already built successfully in CI
2024-04-05 17:52:10 +02:00
Sicelo A. Mhlongo
c5bb75e4d0
device-nokia-n900: acpi_handler: fix indentation (MR 4988)
...
Fixes: 7270f472e3
("treewide: fix tabs, final newline, trailing whitespace"
[ci:skip-build]: already built successfully in CI
2024-04-03 07:57:52 +02:00
Sicelo A. Mhlongo
e67b6e5a06
device-nokia-n900: turn display off after two minutes (MR 4988)
...
we are not using a screensaver or similar, so let's turn display off when idle,
to save some power
2024-04-03 07:57:52 +02:00
Sicelo A. Mhlongo
0a0d84325e
device-nokia-n900: enable screen and touchscreen on keyboard slide up (MR 4988)
...
Partially implements the request from
https://gitlab.com/postmarketOS/pmaports/-/issues/621
2024-04-03 07:57:52 +02:00
Sicelo A. Mhlongo
4ac671b055
device-nokia-n900: switch to more robust locking script (MR 4988)
...
This is an adaptation of craftguy's improved script [1]
[1] https://gitlab.com/postmarketOS/pmaports/-/tree/n900-screen-locker
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
2024-04-03 07:57:51 +02:00
Sicelo A. Mhlongo
d5ee14fc28
device-nokia-n900: improve handling of slidey key (MR 4988)
...
The handling for the lock key is currently unreliable (racy?). In many cases,
you have to toggle it twice to turn display off. Fix this by handling it via
acpid. Since the scripts currently depend on X11 tools, move them to the x11
subpackage. They can be moved back to the main device package in future when
Wayland support has been implemented.
Block i3 from handling the lock key to avoid additional races.
2024-04-03 07:57:51 +02:00
Sicelo A. Mhlongo
27523989d9
device-nokia-n900: modernize acpid scripts (MR 4988)
...
1. Reduce keypad brightness. Full brightness is unnecessary
2. Correct the camera cover states. It is 1 when closed, i.e. covered [1]
3. Drop proximity sensor handling, in favor of supporting it in
iio-sensor-proxy [2]
4. Drop power button handling. This is handled by the WM [3]
5. Drop handling for volume keys. These will be handled via WM later (when PA
is integrated)
6. Drop duplicate KP_SLIDE_* entries in handler script
[1] https://elixir.bootlin.com/linux/v6.9-rc1/source/include/uapi/linux/input-event-codes.h#L917
[2] https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/merge_requests/375
[3] 9bb205e18c/device/community/device-nokia-n900/i3wm/i3wm.conf (L67)
2024-04-03 07:57:48 +02:00
Anton Bambura
beb5bebd3f
microsoft-surface-rt: move to community (MR 4943)
...
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
2024-04-03 07:25:51 +02:00
Sicelo A. Mhlongo
fd49591adf
device-nokia-n900: provide feedbackd haptics support (MR 4997)
...
[ci:skip-build]: already built successfully in CI
2024-04-02 21:26:25 +02:00
Sicelo A. Mhlongo
bd8dfd304f
device-nokia-n900: do not load gpio_leds automatically (MR 4996)
...
6c30cb42a4
("linux-postmarketos-omap: enable new community kconfig options")
set CONFIG_LEDS_TRIGGER_DEFAULT_ON builtin. The consequence is that the debug
LEDs are now always turned on, which interferes with the keyboard backlight.
Since pmOS requires it to be builtin now, let us workaround the issue by not
loading leds_gpio at boot.
[ci:skip-build]: already built successfully in CI
2024-04-02 19:48:14 +02:00
Anton Bambura
ac5c79aa8c
google-x64cros: install rtw88 firmware (MR 4993)
...
This is used on some devices
[ci:skip-vercheck]: changing only _pmb_recommends
2024-04-02 18:50:42 +03:00
Ferass El Hafidi
44b9db8247
device/{main,community}: be consistent with $pkgver
(MR 4992)
...
See: pmaports#2610
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
2024-04-02 12:55:46 +02:00
Barnabás Czémán
2db2095b2a
device-xiaomi-daisy: limit touchscreen calibration for goodix (MR 4978)
...
Limit touchscreen calibration only available for goodix variant, it has fixed
the calibration isssues on focaltech variant.
2024-03-31 18:14:56 +09:00
Barnabás Czémán
c529560855
device-xiaomi-mido: remove nonfree-firmware subpackage (MR 4970)
...
Remove nonfree-firmware subpackage and depend on firmware-qcom-adreno-a530.
[ci:ignore-count]
2024-03-28 19:05:02 +03:00
Barnabás Czémán
482fa6862a
device-xiaomi-ysl: remove nonfree-firmware subpackage (MR 4970)
...
Remove nonfree-firmware subpackage and depend on firmware-qcom-adreno-a530.
2024-03-28 19:05:01 +03:00
Barnabás Czémán
917ab60d5c
firmware-xiaomi-ysl: remove a530 firmware files (MR 4970)
...
Remove a530 firmware files in favor of firmware-qcom-adreno-a530.
2024-03-28 19:05:01 +03:00
Barnabás Czémán
e0c742901d
device-xiaomi-vince: remove nonfree-firmware subpackage (MR 4970)
...
Remove nonfree-firmware subpackage and depend on firmware-qcom-adreno-a530.
2024-03-28 19:05:00 +03:00
Barnabás Czémán
fee53da732
firmware-xiaomi-vince: remove a530 firmware files (MR 4970)
...
Remove a530 firmware files in favor of firmware-qcom-adreno-a530.
2024-03-28 19:05:00 +03:00
Barnabás Czémán
0f52d19d52
device-xiaomi-tissot: remove nonfree-firmware subpackage (MR 4970)
...
Remove nonfree-firmware subpackage and depend on firmware-qcom-adreno-a530.
2024-03-28 19:05:00 +03:00
Barnabás Czémán
53901bc222
firmware-xiaomi-tissot: remove a530 firmware files (MR 4970)
...
Remove a530 firmware files in favor of firmware-qcom-adreno-a530.
2024-03-28 19:04:59 +03:00
Barnabás Czémán
b826962b2a
device-xiaomi-markw: remove nonfree-firmware subpackage (MR 4970)
...
Remove nonfree-firmware subpackage and depend on firmware-qcom-adreno-a530.
2024-03-28 19:04:59 +03:00
Barnabás Czémán
84d35ee5a1
firmware-xiaomi-markw: remove a530 firmware files (MR 4970)
...
Remove a530 firmware files in favor of firmware-qcom-adreno-a530.
2024-03-28 19:04:59 +03:00
Barnabás Czémán
ae4ea07856
device-xiaomi-daisy: remove nonfree-firmware subpackage (MR 4970)
...
Remove nonfree-firmware subpackage and depend on firmware-qcom-adreno-a530.
2024-03-28 19:04:58 +03:00
Barnabás Czémán
3c2f6d76d2
firmware-xiaomi-daisy: remove a530 firmware files (MR 4970)
...
Remove a530 firmware files in favor of firmware-qcom-adreno-a530.
2024-03-28 19:04:54 +03:00
Andrea Bolognani
d13c816c57
soc-qcom-msm8953: Add workaround for GTK4 rendering issues (MR 4961)
...
This workaround is basically identical to the one recently
applied to soc-qcom-msm8916 (MR 4958).
Tested on xiaomi-tissot and xiaomi-daisy, where performance for
GTK4 applications goes from barely usable to fairly decent.
Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/2220
Thanks: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Andrea Bolognani <eof@kiyuko.org>
[ci:skip-build]: already built successfully in CI
2024-03-27 21:09:32 +00:00
Nikita Travkin
399e4da96f
community/linux-postmarketos-qcom-msm8916: Enable EFI (MR 4962)
...
Many msm8916 devices can make use of U-Boot's EFI support. Enable it.
2024-03-26 12:03:28 +01:00
Caleb Connolly
6edf162782
firmware-oneplus-sdm845: fix source file name (MR 4599)
...
We need the checksum otherwise local HTTP cache gets real confused.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2024-03-25 21:15:24 +00:00
Caleb Connolly
378d76b830
firmware-shift-sdm845: drop firmware-initramfs (MR 4599)
...
Now we're using unl0kr, we don't have to include the GPU firmware in the
initramfs anymore!
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2024-03-25 21:15:24 +00:00
Caleb Connolly
d2560bfb89
firmware-oneplus-sdm845: drop initramfs firmware (MR 4599)
...
Now that we're using unl0kr, we don't need the GPU firmware in the
initramfs.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2024-03-25 21:15:23 +00:00
knuxify
0bb531b926
community/linux-postmarketos-exynos4: Add patch needed for booting samsung-lt01 (MR 4435)
...
This one has stalled a bit due to some upstream shenanigans,
but is now confirmed to be fine; since it hasn't been merged
yet, add it here manually.
[ci:skip-build]: already built successfully in CI
2024-03-24 14:57:52 +01:00
knuxify
d1ba99ce5e
firmware-samsung-midas: add Samsung Galaxy Tab 3 8.0 mainline firmware (MR 4435)
...
The binaries are the same as for the other devices, we just need to add three
new NVRAM TXTs, so add them here since they don't make the package that much
larger.
2024-03-24 14:57:50 +01:00