asus-tf101: enable wifi (MR 1534)

[ci:skip-build]: already built successfully in CI

device/testing/device-asus-tf101/APKBUILD

@@ -2,21 +2,34 @@
 pkgname=device-asus-tf101
 pkgdesc="Asus Eee Pad Transformer"
 pkgver=0.2
-pkgrel=9
+pkgrel=10
 url="https://postmarketos.org"
 license="MIT"
 arch="armv7"
 options="!check !archcheck"
 depends="postmarketos-base linux-asus-tf101 mkbootimg blobtools"
 makedepends="devicepkg-dev"
-source="deviceinfo"
+subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
+source="deviceinfo nvram_4329.txt modules-load.conf"
 
 build() {
 	devicepkg_build $startdir $pkgname
 }
 
-package() {
+nonfree_firmware() {
-	devicepkg_package $startdir $pkgname
+       pkgdesc="Wifi firmware"
+       depends="firmware-aosp-broadcom-wlan"
+       mkdir "$subpkgdir"
+       install -D -m644 "$srcdir"/nvram_4329.txt \
+           "$subpkgdir"/lib/firmware/postmarketos/bcmdhd/bcm4329/nvram_4329.txt
 }
 
-sha512sums="4e4a8e4202cff822e18c1da82abf65f8cdbfc6e34acd6386940b976e0a45da30c0b7aab6a73f8bc3fc9430284678fe64eb967a94543be175103b11acf036bbf3  deviceinfo"
+package() {
+	devicepkg_package $startdir $pkgname
+	install -Dm644 "$srcdir"/modules-load.conf \
+		"$pkgdir"/etc/modules-load.d/00-$pkgname.conf
+}
+
+sha512sums="4e4a8e4202cff822e18c1da82abf65f8cdbfc6e34acd6386940b976e0a45da30c0b7aab6a73f8bc3fc9430284678fe64eb967a94543be175103b11acf036bbf3  deviceinfo
+d2da77986b419abd225349b5dea197b427de15e530021bf8f81e00a8c519d1a66cf92643b75aa396dccda78496ddd070a73ef91243af8bf78f839d21e6792546  nvram_4329.txt
+49645401e265f49cb942ef899f6ad80eb52c5b94c9eca5c311dcc3d64e0da49fa905674f3e5dc228fd2c4f3162f0c76b2a6fbab9a531031c2b21b27c57ce3ba2  modules-load.conf"

device/testing/device-asus-tf101/modules-load.conf

@@ -0,0 +1 @@
+bcmdhd

device/testing/device-asus-tf101/nvram_4329.txt

@@ -0,0 +1,86 @@
+sromrev=3
+vendid=0x14e4
+devid=0x432f
+boardtype=0x57e
+
+# board revision 1.1
+boardrev=0x11
+
+# boardflags
+boardflags=0x10000200
+boardflags2=0x00400000
+
+# specify the xtalfreq if it is otherthan 38.4MHz
+xtalfreq=37400
+
+aa2g=3
+aa5g=1
+
+ag0=0x82
+ag1=0x84
+
+# 11g paparams
+pa0b0=5107
+pa0b1=64308
+pa0b2=65182
+pa0itssit=62
+pa0maxpwr=66
+opo=0
+mcs2gpo0=0x2222
+mcs2gpo1=0x2222
+
+# sel = 1 : 20% evm  sel = 2 : 27% evm  sel = 3 : 16% evm
+cckdigfilttype=1
+
+# 11a paparams lowband
+pa1lob0=6654
+pa1lob1=63794
+pa1lob2=65134
+# paparams midband
+pa1b0=5970
+pa1b1=63982
+pa1b2=65122
+#paparams high band
+pa1hib0=5910
+pa1hib1=63998
+pa1hib2=65130
+
+pa1itssit=62
+pa1maxpwr=60
+opo=0
+mcs5gpo=0x22222222
+
+# 11g rssi params
+rssismf2g=0xa
+rssismc2g=0xb
+rssisav2g=0x3
+bxa2g=0
+
+# 11a rssi params
+rssismf5g=0x8
+rssismc5g=0x6
+rssisav5g=0x0
+bxa2g=0
+
+# country code
+ccode=ALL
+cctl=0x0
+
+# Channel gain adjustments 
+5g_cga=0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0
+boardnum=2048
+macaddr=00:90:4c:c5:34:23
+#######
+nocrc=1
+
+#for mfgc
+otpimagesize=182
+
+# sdio extra configs
+hwhdr=0x05ffff031030031003100000
+
+#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
+RAW1=80 02 fe ff
+
+#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
+#RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A