community/samsung-a5(u)lte: enable screen in initfs (MR 2110)

As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the
partition. This allows the splash screen and osk-sdl to work correctly.

device/community/device-samsung-a5lte/APKBUILD

@@ -3,15 +3,15 @@
 # Co-Maintainer: Minecrell <minecrell@minecrell.net>
 pkgname=device-samsung-a5lte
 pkgdesc="Samsung Galaxy A5 (SM-A500F)"
-pkgver=3
+pkgver=4
-pkgrel=2
+pkgrel=0
 url="https://postmarketos.org"
 license="MIT"
 arch="aarch64"
 options="!check !archcheck"
 depends="postmarketos-base mkbootimg soc-qcom-msm8916"
 makedepends="devicepkg-dev"
-source="deviceinfo modprobe.conf"
+source="deviceinfo"
 subpackages="
 	$pkgname-kernel-mainline:kernel_mainline
 	$pkgname-kernel-mainline-modem:kernel_mainline_modem
@@ -52,5 +52,4 @@ nonfree_firmware_modem() {
 	mkdir "$subpkgdir"
 }
 
-sha512sums="4d24cbd34ec2ce958444704c658405a7cf57a140f417abbec2c2ea3ec2842ec31703d591451fc7e381e53acdf4672e489fd09b8c7a0af6e26c552fdba619099a  deviceinfo
+sha512sums="f8966469bc1a5b51043e7415312896fea7b480808c4ee3e8d5049b41363f584b4664a752527399c888acac0fb9ab986874174c728b0599556f61afb5e7d678d8  deviceinfo"
-2dcb1b872135fa1861c172782d327b147d7b2705a68fc64300e70299b9926b01be1d76ab03a12d57a53b8dddc2ff67620e80fc6bdfcbb36423dd2afcdbadc0ed  modprobe.conf"

device/community/device-samsung-a5lte/deviceinfo

@@ -11,7 +11,7 @@ deviceinfo_year="2015"
 deviceinfo_dtb_mainline="qcom/msm8916-samsung-a5u-eur"
 deviceinfo_dtb_mainline_modem="qcom/msm8916-samsung-a5u-eur-modem"
 deviceinfo_append_dtb="true"
-deviceinfo_modules_initfs=""
+deviceinfo_modules_initfs="panel-samsung-ea8061v-ams497ee01 msm mms114"
 deviceinfo_arch="aarch64"
 
 # Device related
@@ -22,9 +22,6 @@ deviceinfo_screen_width="720"
 deviceinfo_screen_height="1280"
 deviceinfo_getty="ttyMSM0;115200"
 
-# MSM DRM cannot take over the framebuffer from the bootloader at the moment
-deviceinfo_no_framebuffer="true"
-
 # Bootloader related
 deviceinfo_flash_method="fastboot"
 deviceinfo_kernel_cmdline="earlycon console=ttyMSM0,115200 PMOS_NO_OUTPUT_REDIRECT"

device/community/device-samsung-a5lte/modprobe.conf

@@ -1,20 +0,0 @@
-#
-# There is a weird probe issue if both MSM DRM and the panel driver are built
-# as modules: When MSM DRM is loaded it registers the DSI bus for the panel.
-# At this point the panel is not loaded yet, so the kernel sends an uevent
-# to userspace to load the necessary panel module.
-#
-# This causes some delay until the panel module is loaded, so MSM DRM fails to
-# probe temporarily and returns -EPROBE_DEFER (to request probing again later).
-# Unfortunately this will also unregister the DSI bus for the panel, and the
-# kernel will not try probing MSM DRM + panel again until some other (slow)
-# driver loads after MSM DRM.
-#
-# Usually WCNSS (WiFi/BT) fits that criteria, allowing the display to work.
-# But this does not work if the user decides to exclude proprietary firmware.
-#
-# To avoid this problem we add an explicit soft dependency for MSM DRM
-# on the panel module, so modprobe loads the panel module first and MSM DRM
-# will immediately find the panel it is looking for.
-#
-softdep msm pre: panel-samsung-ea8061v-ams497ee01

device/community/device-samsung-a5ulte/APKBUILD

@@ -2,15 +2,15 @@
 # Maintainer: Minecrell <minecrell@minecrell.net>
 pkgname=device-samsung-a5ulte
 pkgdesc="Samsung Galaxy A5 (SM-A500FU)"
-pkgver=3
+pkgver=4
-pkgrel=2
+pkgrel=0
 url="https://postmarketos.org"
 license="MIT"
 arch="aarch64"
 options="!check !archcheck"
 depends="postmarketos-base mkbootimg soc-qcom-msm8916"
 makedepends="devicepkg-dev"
-source="deviceinfo modprobe.conf"
+source="deviceinfo"
 subpackages="
 	$pkgname-kernel-mainline:kernel_mainline
 	$pkgname-kernel-mainline-modem:kernel_mainline_modem
@@ -51,5 +51,4 @@ nonfree_firmware_modem() {
 	mkdir "$subpkgdir"
 }
 
-sha512sums="dbff7874b2cdf22164c27ece38aef65d60ee76a42a17fa6c12fb77dd6c0b41e89f09c0876dcd8528aadba13d301961dc0446ffae0b7951b32d18f77ed1bdf238  deviceinfo
+sha512sums="e229166e699a5ca68fd5c762b70a25ff8306986d63190a5d9dba7bc296dec5d597d660a37b25a0f39b4722a595678aa0ac35695e50a18a757436e9ad6a2c55e9  deviceinfo"
-2dcb1b872135fa1861c172782d327b147d7b2705a68fc64300e70299b9926b01be1d76ab03a12d57a53b8dddc2ff67620e80fc6bdfcbb36423dd2afcdbadc0ed  modprobe.conf"

device/community/device-samsung-a5ulte/deviceinfo

@@ -9,7 +9,7 @@ deviceinfo_year="2015"
 deviceinfo_dtb_mainline="qcom/msm8916-samsung-a5u-eur"
 deviceinfo_dtb_mainline_modem="qcom/msm8916-samsung-a5u-eur-modem"
 deviceinfo_append_dtb="true"
-deviceinfo_modules_initfs=""
+deviceinfo_modules_initfs="panel-samsung-ea8061v-ams497ee01 msm mms114"
 deviceinfo_arch="aarch64"
 
 # Device related
@@ -20,9 +20,6 @@ deviceinfo_screen_width="720"
 deviceinfo_screen_height="1280"
 deviceinfo_getty="ttyMSM0;115200"
 
-# MSM DRM cannot take over the framebuffer from the bootloader at the moment
-deviceinfo_no_framebuffer="true"
-
 # Bootloader related
 deviceinfo_flash_method="fastboot"
 deviceinfo_kernel_cmdline="earlycon console=ttyMSM0,115200 PMOS_NO_OUTPUT_REDIRECT"

device/community/device-samsung-a5ulte/modprobe.conf

@@ -1,20 +0,0 @@
-#
-# There is a weird probe issue if both MSM DRM and the panel driver are built
-# as modules: When MSM DRM is loaded it registers the DSI bus for the panel.
-# At this point the panel is not loaded yet, so the kernel sends an uevent
-# to userspace to load the necessary panel module.
-#
-# This causes some delay until the panel module is loaded, so MSM DRM fails to
-# probe temporarily and returns -EPROBE_DEFER (to request probing again later).
-# Unfortunately this will also unregister the DSI bus for the panel, and the
-# kernel will not try probing MSM DRM + panel again until some other (slow)
-# driver loads after MSM DRM.
-#
-# Usually WCNSS (WiFi/BT) fits that criteria, allowing the display to work.
-# But this does not work if the user decides to exclude proprietary firmware.
-#
-# To avoid this problem we add an explicit soft dependency for MSM DRM
-# on the panel module, so modprobe loads the panel module first and MSM DRM
-# will immediately find the panel it is looking for.
-#
-softdep msm pre: panel-samsung-ea8061v-ams497ee01