forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-huawei-g7/APKBUILD

39 lines
1.3 KiB
Text
Raw Normal View History

huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
# Reference: <https://postmarketos.org/devicepkg>
# Maintainer: Minecrell <minecrell@minecrell.net>
pkgname=device-huawei-g7
pkgdesc="Huawei Ascend G7"
device/msm8916*: Generate extlinux.conf (MR 4826) Now as boot-deploy allows us to generate both boot.img and extlinux.conf at the same time, enable generating the config for all msm8916 since it will be used in the future lk2nd release. boot.img is still kept to keep compatibility with current lk2nd releases and to allow system recovery with fastboot when required. [ci:skip-build] already built successfully in CI [ci:ignore-count]
2024-02-15 08:21:05 +00:00
pkgver=3
pkgrel=0
huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
url="https://postmarketos.org"
license="MIT"
arch="aarch64"
options="!check !archcheck"
depends="postmarketos-base mkbootimg soc-qcom-msm8916 linux-postmarketos-qcom-msm8916"
makedepends="devicepkg-dev"
device/*: transform deviceinfo_modules_initfs into a file (MR 4169) The file is automatically packed by devicepkg-dev utils Relates #1836
2023-08-02 17:06:01 +00:00
source="deviceinfo modules-initfs pointercal"
huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
install -D -m644 "$srcdir"/pointercal "$pkgdir"/etc/pointercal
}
nonfree_firmware() {
pkgdesc="GPU/WiFi/BT/Video firmware"
<msm8916-secure boot-modem>: use separate firmware packages (MR 2619) Rule B: Devices without secure boot but without modem support need: 1. GPU firmware (firmware-qcom-adreno-a300) 3. firmware-qcom-msm8916-wcnss: more recent wcnss firmware 4. device-specific -wcnss-nv firmware 5. firmware-qcom-msm8916-venus: some packaged venus firmware
2021-10-19 08:29:15 +00:00
# msm-firmware-loader not needed because modem is not supported yet
depends="firmware-qcom-adreno-a300
firmware-qcom-msm8916-wcnss firmware-huawei-g7-wcnss-nv
firmware-qcom-msm8916-venus"
huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
mkdir "$subpkgdir"
}
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
sha512sums="
device/msm8916*: Generate extlinux.conf (MR 4826) Now as boot-deploy allows us to generate both boot.img and extlinux.conf at the same time, enable generating the config for all msm8916 since it will be used in the future lk2nd release. boot.img is still kept to keep compatibility with current lk2nd releases and to allow system recovery with fastboot when required. [ci:skip-build] already built successfully in CI [ci:ignore-count]
2024-02-15 08:21:05 +00:00
105bd5e1943798ca82966daece0e75f101589f1ba881487ffb2e5103b5018be4c3733a4fd6a4e5d1ada6353d14e72d980633adbf394f3090a229cffd149d52f4 deviceinfo
device/*: transform deviceinfo_modules_initfs into a file (MR 4169) The file is automatically packed by devicepkg-dev utils Relates #1836
2023-08-02 17:06:01 +00:00
1523b9cdd3d3578089bd4ffca40c06f595cda5f94c75433b5786dddeba5df1011cbb027e46d66c153479b03bc3e7ac3a1ea74fc296fc07032562abc4892b22bd modules-initfs
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
b47b3eee3f330408ea28f89b0a70752466f1ab854fc7c4677157fd2dcf5a546d1056b1fbfac587ece827b7ae864e969f0fef6981e4e9802b159f88d03fe9b487 pointercal
"
Reference in a new issue Copy permalink