pmaports/device/main/device-pine64-pinephone/setup-modem.sh

#!/bin/sh

log() {
	echo "$@" | logger -t "postmarketOS:modem-setup"
}

QMBNCFG_CONFIG="1"

if [ -z "$1" ]
then
	DEV="/dev/EG25.AT"
else
	DEV="$1"
fi

# Read current config
QMBNCFG_ACTUAL_CONFIG=$(echo 'AT+QMBNCFG="AutoSel"' | atinout - $DEV -)

if echo $QMBNCFG_ACTUAL_CONFIG | grep -q $QMBNCFG_CONFIG
then
	log "Modem already configured"
	exit 0
fi


# Configure VoLTE auto selecting profile
RET=$(echo "AT+QMBNCFG=\"AutoSel\",$QMBNCFG_CONFIG" | atinout - $DEV -)
if ! echo $RET | grep -q OK
then
	log "Failed to enable VoLTE profile auto selecting: $RET"
	exit 1
fi
pine64-pinephone: setup modem audio on first boot (!974) 2020-02-20 16:44:45 +00:00			`#!/bin/sh`

pine64-pinephone: enable VoLTE (MR 1434) Also fix configuring device sleep wakeup when modem receives a call 2020-07-21 18:04:51 +00:00			`log() {`
			`echo "$@" \| logger -t "postmarketOS:modem-setup"`
			`}`

			`QMBNCFG_CONFIG="1"`
pine64-pinephone: reset modem after applying configuration (!978) The datasheet says that the AT+QDAI audio routing configuration is saved to non-volatile memory directly, and therefore needs a modem reset to be applied. This commits changes the audio routing configuration script to first check for the current configuration, and only change it if it is different from the one wanted. The new configuration is then sent, and modem is reset to apply configuration. 2020-02-21 13:47:07 +00:00
pine64-pinephone: fix pinephone_modem-setup to correctly invoke atinout (MR 2462) `$DEV` was an undefined variable so the atinout commands were printing their helptext instead of actually running. This was noticeable because the "Failed to enable VoLTE profile auto selecting" log was being printed along with said helptext to syslog. The block that defined `$DEV` had been accidentally deleted in bb41f5387971a675d55a632af029c9e79054ca65 . This change restores it. 2021-08-26 07:34:46 +00:00			`if [ -z "$1" ]`
			`then`
			`DEV="/dev/EG25.AT"`
			`else`
			`DEV="$1"`
			`fi`

pine64-pinephone: reset modem after applying configuration (!978) The datasheet says that the AT+QDAI audio routing configuration is saved to non-volatile memory directly, and therefore needs a modem reset to be applied. This commits changes the audio routing configuration script to first check for the current configuration, and only change it if it is different from the one wanted. The new configuration is then sent, and modem is reset to apply configuration. 2020-02-21 13:47:07 +00:00			`# Read current config`
pine64-pinephone: enable VoLTE (MR 1434) Also fix configuring device sleep wakeup when modem receives a call 2020-07-21 18:04:51 +00:00			`QMBNCFG_ACTUAL_CONFIG=$(echo 'AT+QMBNCFG="AutoSel"' \| atinout - $DEV -)`
pine64-pinephone: reset modem after applying configuration (!978) The datasheet says that the AT+QDAI audio routing configuration is saved to non-volatile memory directly, and therefore needs a modem reset to be applied. This commits changes the audio routing configuration script to first check for the current configuration, and only change it if it is different from the one wanted. The new configuration is then sent, and modem is reset to apply configuration. 2020-02-21 13:47:07 +00:00
pine64-pinephone: clean setup-modem.sh script (MR 1701) Since we now use the in-kernel modem driver of Megi's 5.9 kernel, the majority of the setup script has become unnecessary. Remove all the now unnecessary commands and keep it just for enabling VoLTE auto profile selecting https://megous.com/git/linux/tree/drivers/misc/modem-power.c?h=orange-pi-5.10#n531 https://megous.com/git/linux/tree/drivers/misc/modem-power.c?h=orange-pi-5.10#n580 https://megous.com/git/linux/tree/drivers/misc/modem-power.c?h=orange-pi-5.10#n610 2020-11-10 09:57:54 +00:00			`if echo $QMBNCFG_ACTUAL_CONFIG \| grep -q $QMBNCFG_CONFIG`
pine64-pinephone: reset modem after applying configuration (!978) The datasheet says that the AT+QDAI audio routing configuration is saved to non-volatile memory directly, and therefore needs a modem reset to be applied. This commits changes the audio routing configuration script to first check for the current configuration, and only change it if it is different from the one wanted. The new configuration is then sent, and modem is reset to apply configuration. 2020-02-21 13:47:07 +00:00			`then`
pine64-pinephone: enable VoLTE (MR 1434) Also fix configuring device sleep wakeup when modem receives a call 2020-07-21 18:04:51 +00:00			`log "Modem already configured"`
pine64-pinephone: reset modem after applying configuration (!978) The datasheet says that the AT+QDAI audio routing configuration is saved to non-volatile memory directly, and therefore needs a modem reset to be applied. This commits changes the audio routing configuration script to first check for the current configuration, and only change it if it is different from the one wanted. The new configuration is then sent, and modem is reset to apply configuration. 2020-02-21 13:47:07 +00:00			`exit 0`
			`fi`

pine64-pinephone: enable VoLTE (MR 1434) Also fix configuring device sleep wakeup when modem receives a call 2020-07-21 18:04:51 +00:00
			`# Configure VoLTE auto selecting profile`
			`RET=$(echo "AT+QMBNCFG=\"AutoSel\",$QMBNCFG_CONFIG" \| atinout - $DEV -)`
			`if ! echo $RET \| grep -q OK`
			`then`
			`log "Failed to enable VoLTE profile auto selecting: $RET"`
			`exit 1`
			`fi`