forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/device-xiaomi-armani/APKBUILD

55 lines
2.9 KiB
Text
Raw Normal View History

Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
# Reference: <https://postmarketos.org/devicepkg>
pkgname="device-xiaomi-armani"
pkgdesc="Redmi 1S"
pkgver=0.1
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
pkgrel=4
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
url="https://postmarketos.org"
license="MIT"
arch="noarch"
options="!check"
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
depends="postmarketos-base linux-xiaomi-armani mkbootimg mesa-dri-swrast msm-fb-refresher"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
makedepends="devicepkg-dev"
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
install="$pkgname.post-install $pkgname.pre-deinstall $pkgname.post-upgrade"
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
source="deviceinfo
90-touchscreen.rules
100-charging.rules
armani_battery_charging.sh
armani_battery_discharging.sh
wlanarmani
device-xiaomi-armani.post-install
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
device-xiaomi-armani.post-upgrade
device-xiaomi-armani.pre-deinstall
fb.modes"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
install -Dm644 "$srcdir"/90-touchscreen.rules "$pkgdir"/etc/udev/rules.d/90-touchscreen.rules
install -Dm644 "$srcdir"/100-charging.rules "$pkgdir"/etc/udev/rules.d/100-charging.rules
install -Dm744 "$srcdir"/armani_battery_charging.sh "$pkgdir"/usr/bin/armani_battery_charging.sh
install -Dm744 "$srcdir"/armani_battery_discharging.sh "$pkgdir"/usr/bin/armani_battery_discharging.sh
install -Dm755 "$srcdir"/wlanarmani "$pkgdir"/etc/init.d/wlanarmani
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
install -Dm755 "$srcdir"/fb.modes "$pkgdir"/etc/fb.modes
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
}
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
nonfree_firmware() {
pkgdesc="Wifi firmware"
depends="firmware-xiaomi-armani"
mkdir "$subpkgdir"
}
msm-fb-refresher: use initfs hook (#1438) The `msm-fb-refresher` updates the screen for msm based devices. It is not needed for all devices, so we had some extra code in the initramfs, that would only add it when the `deviceinfo_msm_refresher` variable was set. However, we are able now to add files to initramfs hooks, so this hack can be removed and simplify everything. Changes: * Remove `deviceinfo_msm_refresher` from all deviceinfos * Add sanity check for it * Move all `deviceinfo` sanity checks to an extra function * `postmarketos-mkinitfs`: remove code for msm refresher * `msm-fb-refresher`: add initramfs hook
2018-04-24 21:09:53 +00:00
sha512sums="19c971c3e4356892eb414f7992e20897db88b94591a8140fd1919f5cb1998a54dfd938388cd2cba0b89b53cbc14ce4abd7bbca4d873c658cd63b9c76fc336da9 deviceinfo
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
abf694ebe949025268630457ad14ae69f6a33c151236c1a193da32c27f836591e932517f011f6eb7ce750ab74d2f1e9a70724fed7150210d4da1b80a6e86a801 90-touchscreen.rules
862f9a8d81af74c0a1c99c6255d4ec9d4bdd7828636ee29fbaf4b3ceef53f236fd2b2078e3150baf0f1d78a3da87d7b3a5b975fef33014238eb7658428642571 100-charging.rules
cf82b3bf37c4975668d7bb6f0e573fa5b44ed596d80a7ac2cdfa78dd619b7dc58c085fe1a0703953a143a46a4d917abf94f658e268578fe1c40664fa639959d3 armani_battery_charging.sh
c2ae3887712a209a8c8dc60ee87ff1ec8944246cc1a69d1f6f9f2725434e05b6c8388c0b3756423d5cec6a6e0ffc7272c30ccc20b77f0dac0813bb25476d4997 armani_battery_discharging.sh
22339e8b1c854e740034fe305d8447a88f7be98f8f2ef86b7e9ea6e373a30643993d95865c820df6c3598605d3390eb93a859c7a423f04de54a3b06a69adcb55 wlanarmani
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
c2db5aa96abc6181d69db02d921beb6d06245aad8647b25e6993c1cbc2b6b1876cbcc4e8bcc01825ef2320aa354f889a3890536d9782b62bc66145b953baf29c device-xiaomi-armani.post-install
83d1a74578698d5851191eaa8c6c05feedfc9a2336e1006fb23cd338a738fdeebf40f8eda07e5ecdf27f3b141c455d710364070dd521560f4195b745a076fd8d device-xiaomi-armani.post-upgrade
bb32227eae035e9f7dd70061e84d30abe6e8ad671cf9a5e9531a5468f153ac97fc33892f743b513de387ec915ad8814ca883348c9817e1ecd655c715e1d306d8 device-xiaomi-armani.pre-deinstall
cf2b75e766f6ed5b7372179dfe160ecf1fa24a1c4f054abacc98e69794db90ca2c7f686325f7ce806b102c8eb93a345da3c016b17f280eda47f5891322162362 fb.modes"
Reference in a new issue Copy permalink