forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/main/postmarketos-base/APKBUILD

74 lines
2.1 KiB
Text
Raw Normal View History

Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
pkgname=postmarketos-base
Close #574: swap file support/encrypted swap on rx51 (#585) This adds a custom swap file service, which allows specifying a recommended swap size in the deviceinfo file via `deviceinfo_swap_size_recommended`. For the N900 this defaults to 1024 MB now. As the swap file is created in the root partition, we have encrypted swap now (unless encryption is disabled with `--no-fde`).
2017-09-20 18:32:19 +00:00
pkgver=3
Set all of user's groups in "pmbootstrap install" (#1432) The postmarketos-base package used to make the user part of the "video" and "audio" groups. However, this did not work reliably, and we were adding the "wheel" group in "pmbootstrap install" anyway. Now all groups get added in "pmbootstrap install", and the names of the groups have been moved to `pmb.config.install_user_groups`.
2018-04-23 20:52:03 +00:00
pkgrel=17
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
pkgdesc="Meta package for minimal postmarketOS base"
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
url="https://github.com/postmarketOS"
arch="noarch"
license="GPL3+"
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
depends="
alpine-base
Install dbus by default (#783) Since we are starting it on boot, and wpa_supplicant is being run in 'dbus mode', it makes sense to have it installed by default.
2017-10-18 19:02:28 +00:00
dbus
Fix #588: Add chrony ntp client & timezone config (#674) This adds chrony as the ntp client (starting on boot), and also adds a prompt in the init step for configuring the timezone.
2017-10-13 19:18:24 +00:00
chrony
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
cryptsetup
eudev
haveged
htop
iw
nano
openssh
postmarketos-mkinitfs
sudo
tmux
util-linux
Fix #199: Run weston with user instead of root (#707)
2017-10-07 16:14:49 +00:00
wpa_supplicant
postmarketos-base: Enable NetworkManager by default (#388)
2018-03-04 11:07:21 +00:00
shadow
networkmanager"
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
makedepends=""
install="$pkgname.post-install"
Automatically install X11 and mesa dependencies (using install_if) (#696) * device-qemu-amd64: subpackages for x11 and mesa * postmarketos-base: add x11 subpackage
2017-10-06 18:19:47 +00:00
subpackages="$pkgname-x11"
Close #574: swap file support/encrypted swap on rx51 (#585) This adds a custom swap file service, which allows specifying a recommended swap size in the deviceinfo file via `deviceinfo_swap_size_recommended`. For the N900 this defaults to 1024 MB now. As the swap file is created in the root partition, we have encrypted swap now (unless encryption is disabled with `--no-fde`).
2017-09-20 18:32:19 +00:00
source="
firmwareload.sh
50-firmware.rules
postmarketos-base: Enable NetworkManager by default (#388)
2018-03-04 11:07:21 +00:00
networkmanager.conf
Close #574: swap file support/encrypted swap on rx51 (#585) This adds a custom swap file service, which allows specifying a recommended swap size in the deviceinfo file via `deviceinfo_swap_size_recommended`. For the N900 this defaults to 1024 MB now. As the swap file is created in the root partition, we have encrypted swap now (unless encryption is disabled with `--no-fde`).
2017-09-20 18:32:19 +00:00
swapfile/swapfile
swapfile/swapfile.init
device packages: depend on postmarketos-base (#1258) * device-*: add postmarketos-base to depends * aportgen: add postmarketos-base to depends * Add test case * postmarketos-base: Don't depend on devicepkg * msm-fb-refresher: Enable service in post-install
2018-02-25 18:40:54 +00:00
swapfile/swapfile.conf"
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
options="!check"
package() {
Close #147: postmarketos-base: added udev rule / firmwareload.sh (#427) See also: https://github.com/postmarketOS/pmbootstrap/pull/374
2017-08-20 12:49:55 +00:00
install -D -m644 "$srcdir"/50-firmware.rules \
"$pkgdir"/etc/udev/rules.d/50-firmware.rules
install -D -m755 "$srcdir"/firmwareload.sh \
"$pkgdir"/usr/lib/firmwareload.sh
Fix #669: Only do useradd via Python, properly install /etc/skel defaults (#685)
2017-10-03 18:10:28 +00:00
install -d -m755 "$pkgdir"/etc/skel
Close #574: swap file support/encrypted swap on rx51 (#585) This adds a custom swap file service, which allows specifying a recommended swap size in the deviceinfo file via `deviceinfo_swap_size_recommended`. For the N900 this defaults to 1024 MB now. As the swap file is created in the root partition, we have encrypted swap now (unless encryption is disabled with `--no-fde`).
2017-09-20 18:32:19 +00:00
# Install swapfile
install -Dm755 "$srcdir"/swapfile \
"$pkgdir"/sbin/swapfile
install -Dm644 "$srcdir"/swapfile.conf \
"$pkgdir"/etc/conf.d/swapfile
install -Dm755 "$srcdir"/swapfile.init \
"$pkgdir"/etc/init.d/swapfile
postmarketos-base: Enable NetworkManager by default (#388)
2018-03-04 11:07:21 +00:00
install -D -m644 "$srcdir"/networkmanager.conf \
"$pkgdir"/etc/NetworkManager/conf.d/postmarketos.conf
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
}
Automatically install X11 and mesa dependencies (using install_if) (#696) * device-qemu-amd64: subpackages for x11 and mesa * postmarketos-base: add x11 subpackage
2017-10-06 18:19:47 +00:00
x11() {
install_if="$pkgname xorg-server"
depends="
libinput
xf86-input-libinput
xf86-video-fbdev"
mkdir "$subpkgdir"
}
Close #709: Improve user creation (#725) * Allow to specify a custom username in "pmbootstrap init" * Build chroots have "pmos" instead of "user" as username now * Installation user UID is 1000 now (as in all other Linux distributions) * Adjust autologins * postmarketos-base: enable wheel group for sudo, removed previous sudoers file * Implement safe upgrade path: We save the version of the work folder format now, in $WORK/version. When this file does not exist, it defaults to 0. In case it does not match the currently required version (pmb.config.work_version), then ask the user if it should automatically be upgraded.
2017-10-12 20:08:10 +00:00
sha512sums="38dc75c0ed32b76dccd3d8e7e8173e8b7d91847cf2b07123f376b95af46b4f89798b24f45302a0726fdc1cf253aecaac140f431735ac5c6511553f790badd0af firmwareload.sh
Close #147: postmarketos-base: added udev rule / firmwareload.sh (#427) See also: https://github.com/postmarketOS/pmbootstrap/pull/374
2017-08-20 12:49:55 +00:00
0b098828080055d3646ea54891cb0e1b578cbc30f5e16f7284f2814c08192f18079a38fb686d192715ae6a3d2cd6625d9e3cf99f234a6f0d94088bb0cb2ce43d 50-firmware.rules
postmarketos-base: Enable NetworkManager by default (#388)
2018-03-04 11:07:21 +00:00
f6750935cd304eb8c248f7bc65bed0c8bcd27c00bb8d0565f85ab8cfd5769cf5e8b1f27a7c851edc8236d80b014fb513e42951953fc403d8f47769776122e275 networkmanager.conf
Close #574: swap file support/encrypted swap on rx51 (#585) This adds a custom swap file service, which allows specifying a recommended swap size in the deviceinfo file via `deviceinfo_swap_size_recommended`. For the N900 this defaults to 1024 MB now. As the swap file is created in the root partition, we have encrypted swap now (unless encryption is disabled with `--no-fde`).
2017-09-20 18:32:19 +00:00
3ceeee37f558e7c95ad973692b6a437f997e6b46c3d1c2257ddfb1529a5633477373aa123c7f08164e818daae50acb203d151379f27ca11bd458809e6a0d4de7 swapfile
f5cc0f1265955d2646e5f099dd4b5d4c287945bfc18c16044db57670d456f55c678fc11cc59e6dab3fa340832ce869d516302a3a35c13518539ed0cedca51819 swapfile.init
device packages: depend on postmarketos-base (#1258) * device-*: add postmarketos-base to depends * aportgen: add postmarketos-base to depends * Add test case * postmarketos-base: Don't depend on devicepkg * msm-fb-refresher: Enable service in post-install
2018-02-25 18:40:54 +00:00
e0d2d48b82a03239a4c0a00acaf83e00d397c23a8d7c71053d4e2a383357c22dcedef9e81b0e12a1d7514e1fdbe0bb3eb82613d18b29034a7ce5447f13c84a53 swapfile.conf"
Reference in a new issue Copy permalink