forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-asus-me176c/APKBUILD

65 lines
1.7 KiB
Text
Raw Normal View History

New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
# Reference: <https://postmarketos.org/devicepkg>
device/device-asus-me176c: fix APKBUILD (!874)
2020-01-10 16:20:16 +00:00
# Contributor: Mis012 <michael.srba@seznam.cz>
asus-me176c: reduce rootfs size by installing only needed Mesa driver (!910) The mesa-dri-intel package is deprecated since it was replaced with mesa-dri-classic and mesa-dri-gallium. Installing mesa-dri-intel causes both packages to be installed. The Intel graphics in asus-me176c are not supported by the new Gallium "iris" driver, therefore asus-me176c can only use the old i965 driver available in mesa-dri-classic. Removing mesa-dri-gallium reduces the disk space needed for a minimal installation on asus-me176c: - Before: 329M - After: 256M (-73M)
2020-01-28 20:15:44 +00:00
# Contributor: Minecrell <minecrell@minecrell.net>
asus-me176c: add alsa-ucm-conf to dependencies (!1042) This is needed for audio to work properly. Also change meson buildtype to "plain", see https://lists.alpinelinux.org/~alpine/devel/%3C2896c13070c508a49cbaa72c8fb7f34ea947358b.camel%40cogitri.dev%3E
2020-03-09 10:14:11 +00:00
# Maintainer: Minecrell <minecrell@minecrell.net>
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
pkgname="device-asus-me176c"
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
pkgdesc="ASUS MeMO Pad 7 (ME176C(X))"
asus-me176c: add alsa-ucm-conf to dependencies (!1042) This is needed for audio to work properly. Also change meson buildtype to "plain", see https://lists.alpinelinux.org/~alpine/devel/%3C2896c13070c508a49cbaa72c8fb7f34ea947358b.camel%40cogitri.dev%3E
2020-03-09 10:14:11 +00:00
pkgver=2
pkgrel=0
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
url="https://postmarketos.org"
license="MIT"
arch="x86_64"
options="!check !archcheck"
asus-me176c: add alsa-ucm-conf to dependencies (!1042) This is needed for audio to work properly. Also change meson buildtype to "plain", see https://lists.alpinelinux.org/~alpine/devel/%3C2896c13070c508a49cbaa72c8fb7f34ea947358b.camel%40cogitri.dev%3E
2020-03-09 10:14:11 +00:00
depends="
postmarketos-base
linux-asus-me176c
firmware-asus-me176c-acpi intel-ucode
$pkgname-factory
mesa-dri-classic mesa-vulkan-intel
alsa-ucm-conf
"
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
makedepends="devicepkg-dev meson eudev-dev"
_commit=3155254999ac36c3051a2118c415de25a072c0f6
source="
deviceinfo
https://github.com/me176c-dev/linux-me176c/archive/$_commit.tar.gz
"
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
subpackages="
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
$pkgname-factory
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
$pkgname-nonfree-firmware:nonfree_firmware
"
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
build() {
devicepkg_build $startdir $pkgname
meson \
--prefix=/usr \
--sysconfdir=/etc \
--mandir=/usr/share/man \
--localstatedir=/var \
asus-me176c: add alsa-ucm-conf to dependencies (!1042) This is needed for audio to work properly. Also change meson buildtype to "plain", see https://lists.alpinelinux.org/~alpine/devel/%3C2896c13070c508a49cbaa72c8fb7f34ea947358b.camel%40cogitri.dev%3E
2020-03-09 10:14:11 +00:00
--buildtype=plain \
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
-Dsystemd=false -Dopenrc=true \
linux-me176c-$_commit/factory build-factory
ninja -C build-factory
}
package() {
devicepkg_package $startdir $pkgname
}
factory() {
pkgdesc="WiFi/BT MAC address loader"
depends="bluez-btmgmt"
DESTDIR="$subpkgdir" ninja -C "$srcdir"/build-factory install
}
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
nonfree_firmware() {
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
pkgdesc="WiFi, Bluetooth and Sound firmware"
depends="linux-firmware-intel firmware-asus-me176c"
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
mkdir "$subpkgdir"
}
asus-me176c: load goodix touchscreen module in initfs (!1042) This is needed for touchscreen input in osk-sdl.
2020-03-09 10:15:29 +00:00
sha512sums="69636f0e921ebd161333c19ad264cab088bb14fd07f19d4f6e691c02b50977532bda4535c092e530f4477bdd356f20e834b898256822eddfd27bf6de5ef82c8f deviceinfo
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
75243e3d0bc9a352465683ec8cf8b83566e4131bb7fae0f388267a62bdbf4691c955ed034b30df550f921b771080688123ae8db144b72f786bf1677ef1d83f57 3155254999ac36c3051a2118c415de25a072c0f6.tar.gz"
Reference in a new issue Copy permalink