pmaports/device/main/device-pine64-pinephone/90-modem-eg25.rules

SUBSYSTEMS=="usb", ENV{.LOCAL_ifNum}="$attr{bInterfaceNumber}"

SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="01", SYMLINK+="EG25.NMEA", MODE="0660"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="02", SYMLINK+="EG25.AT", MODE="0660"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="03", SYMLINK+="EG25.MODEM", MODE="0660"

ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="02", RUN+="/usr/bin/pinephone_setup-modem '%E{DEVNAME}'"

ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ATTRS{serial}=="0123456789ABCDEF", ATTR{power/control}="on"
ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ATTRS{serial}=="community_fw", ATTR{power/control}="on"
device-pine64-pinephone: Add GNSS/GPS configuration (!494) 2019-12-11 21:15:52 +00:00			`SUBSYSTEMS=="usb", ENV{.LOCAL_ifNum}="$attr{bInterfaceNumber}"`

			`SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="01", SYMLINK+="EG25.NMEA", MODE="0660"`
			`SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="02", SYMLINK+="EG25.AT", MODE="0660"`
			`SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="03", SYMLINK+="EG25.MODEM", MODE="0660"`
pine64-pinephone: enable VoLTE (MR 1434) Also fix configuring device sleep wakeup when modem receives a call 2020-07-21 18:04:51 +00:00
			`ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="02", RUN+="/usr/bin/pinephone_setup-modem '%E{DEVNAME}'"`
device/pine64-pinephone: add recommended modem udev rules (MR 3235) For the Biktorgj firmware the control/power file should be set to on instead of auto. By matching on the serial number this only applies to modems with the community firmware installed. 2022-06-14 23:53:08 +00:00
			`ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ATTRS{serial}=="0123456789ABCDEF", ATTR{power/control}="on"`
device/pine64-pinephone: add additional modem udev rule for new community firmware serial (MR 3240) Ref: https://github.com/Biktorgj/pinephone_modem_sdk/releases/tag/0.6.7 >Set USB port serial number to `community_fw`, so distros can use a specific ruleset in udev for this firmware and a different one when using stock 2022-06-16 18:05:30 +00:00			`ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ATTRS{serial}=="community_fw", ATTR{power/control}="on"`