forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/modem/msm-modem/APKBUILD

47 lines
1.7 KiB
Text
Raw Normal View History

modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
pkgname=msm-modem
modem/msm-modem: uim-selection: Allow configuring wait time for SIM (MR 2695) Unfortunately it looks like some modem firmwares (or SIM cards?) need more time until the SIM card shows up in the modem. This means that the SIM card might not get configured, making it look like it was not detected at all. On the other hand, having the previous long wait loop affects _all devices_ when there is really no SIM inserted. The proper solution would be to make it possible to configure SIM cards once they show up (probably in ModemManager). Until then, try to make it possible to workaround this by introducing a configurable delay to wait for the SIM card. It is set to minimal "1 seconds" by default but could be increased by the user if needed to give the modem enough time to detect the SIM card. This reverts commit 683b543a3b65 ("msm-modem-uim-selection: Don't wait for SIM (MR 2470)" but with a new configuration mechanism and a default of 1 second only. [ci:skip-build] already built successfully in CI
2021-11-16 10:31:48 +00:00
pkgver=7
modem/msm-modem: depend on qmi-utils for uim-selection (MR 2769) Recent libqmi update in Alpine [1] splits off binary utilities into a subpackage. This breaks the selection script which depends on qmicli. Add the new qmi-utils as a dependency to make sure the script can continue to work. [1] - https://gitlab.alpinelinux.org/alpine/aports/-/commit/a1e61165f41053926d32aa76f465a12585efff37
2021-12-18 07:28:23 +00:00
pkgrel=1
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
pkgdesc="Common support for Qualcomm MSM modems"
url="https://postmarketos.org/"
arch="armhf armv7 aarch64"
license="GPL-3.0-or-later"
modem/msm-modem: add rmtfs-openrc dependency (MR 1274) It is possible for msm-modem to get installed before rmtfs-openrc, which causes the following error in post-install: * rc-update: service `rmtfs' does not exist ERROR: msm-modem-1-r0.post-install: script exited with error 1 Add a dependency to ensure rmtfs-openrc gets installed first
2020-05-27 16:17:51 +00:00
depends="rmtfs rmtfs-openrc"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
install="$pkgname.post-install"
modem/msm-modem: drop msm-modem-rpmsg (MR 2535) This is no longer used by anyone and also should not be used anymore. The new WWAN RPMSG CTRL for the WWAN subsystem is now the preferred way to talk to the modem on MSM8916/MSM8939/MSM8974 and other similar SoCs. [ci:skip-build]: already built successfully in CI
2021-09-18 18:34:01 +00:00
subpackages="$pkgname-downstream $pkgname-uim-selection:uim_selection"
msm-modem: add UIM selection script (MR 2291) On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
2021-06-30 04:58:19 +00:00
source="
msm-modem-downstream.initd
modem/msm-modem: uim-selection: Allow configuring wait time for SIM (MR 2695) Unfortunately it looks like some modem firmwares (or SIM cards?) need more time until the SIM card shows up in the modem. This means that the SIM card might not get configured, making it look like it was not detected at all. On the other hand, having the previous long wait loop affects _all devices_ when there is really no SIM inserted. The proper solution would be to make it possible to configure SIM cards once they show up (probably in ModemManager). Until then, try to make it possible to workaround this by introducing a configurable delay to wait for the SIM card. It is set to minimal "1 seconds" by default but could be increased by the user if needed to give the modem enough time to detect the SIM card. This reverts commit 683b543a3b65 ("msm-modem-uim-selection: Don't wait for SIM (MR 2470)" but with a new configuration mechanism and a default of 1 second only. [ci:skip-build] already built successfully in CI
2021-11-16 10:31:48 +00:00
msm-modem-uim-selection.confd
msm-modem: add UIM selection script (MR 2291) On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
2021-06-30 04:58:19 +00:00
msm-modem-uim-selection.initd
udev-downstream.rules
"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
options="!check"
package() {
mkdir -p "$pkgdir"
}
msm-modem: add UIM selection script (MR 2291) On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
2021-06-30 04:58:19 +00:00
uim_selection() {
pkgdesc="$pkgdesc (UIM selection)"
modem/msm-modem: depend on qmi-utils for uim-selection (MR 2769) Recent libqmi update in Alpine [1] splits off binary utilities into a subpackage. This breaks the selection script which depends on qmicli. Add the new qmi-utils as a dependency to make sure the script can continue to work. [1] - https://gitlab.alpinelinux.org/alpine/aports/-/commit/a1e61165f41053926d32aa76f465a12585efff37
2021-12-18 07:28:23 +00:00
depends="$pkgname libqmi qmi-utils"
msm-modem: add UIM selection script (MR 2291) On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
2021-06-30 04:58:19 +00:00
install="$subpkgname.post-install"
modem/msm-modem: uim-selection: Allow configuring wait time for SIM (MR 2695) Unfortunately it looks like some modem firmwares (or SIM cards?) need more time until the SIM card shows up in the modem. This means that the SIM card might not get configured, making it look like it was not detected at all. On the other hand, having the previous long wait loop affects _all devices_ when there is really no SIM inserted. The proper solution would be to make it possible to configure SIM cards once they show up (probably in ModemManager). Until then, try to make it possible to workaround this by introducing a configurable delay to wait for the SIM card. It is set to minimal "1 seconds" by default but could be increased by the user if needed to give the modem enough time to detect the SIM card. This reverts commit 683b543a3b65 ("msm-modem-uim-selection: Don't wait for SIM (MR 2470)" but with a new configuration mechanism and a default of 1 second only. [ci:skip-build] already built successfully in CI
2021-11-16 10:31:48 +00:00
install -Dm644 "$srcdir/$subpkgname.confd" "$subpkgdir/etc/conf.d/$subpkgname"
msm-modem: add UIM selection script (MR 2291) On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
2021-06-30 04:58:19 +00:00
install -Dm755 "$srcdir/$subpkgname.initd" "$subpkgdir/etc/init.d/$subpkgname"
}
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
downstream() {
pkgdesc="$pkgdesc (downstream)"
modem/msm-modem(-downstream): start modem if necessary (MR 1640) On some downstream kernels it seems like we need to explicitly keep /dev/subsys_modem open (without writing anything), otherwise the modem will be stopped (or never started). Weird.
2020-10-07 15:07:04 +00:00
depends="$pkgname libqipcrtr4msmipc libsmdpkt_wrapper keepfileopen"
install="$subpkgname.post-install"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
modem/msm-modem(-downstream): start modem if necessary (MR 1640) On some downstream kernels it seems like we need to explicitly keep /dev/subsys_modem open (without writing anything), otherwise the modem will be stopped (or never started). Weird.
2020-10-07 15:07:04 +00:00
install -Dm755 "$srcdir/$subpkgname.initd" "$subpkgdir/etc/init.d/$subpkgname"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
install -Dm644 "$srcdir/udev-downstream.rules" "$subpkgdir/usr/lib/udev/rules.d/55-$pkgname.rules"
}
msm-modem: add UIM selection script (MR 2291) On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
2021-06-30 04:58:19 +00:00
sha512sums="
3172f8c409f552f13d1da29f14ab6c79072cd6da4acab151a1a0ea1858a416974456852609f14fe29cf97a6a45e60b99d0a57ddcde751da243ee5ac6fa8b672c msm-modem-downstream.initd
modem/msm-modem: uim-selection: Allow configuring wait time for SIM (MR 2695) Unfortunately it looks like some modem firmwares (or SIM cards?) need more time until the SIM card shows up in the modem. This means that the SIM card might not get configured, making it look like it was not detected at all. On the other hand, having the previous long wait loop affects _all devices_ when there is really no SIM inserted. The proper solution would be to make it possible to configure SIM cards once they show up (probably in ModemManager). Until then, try to make it possible to workaround this by introducing a configurable delay to wait for the SIM card. It is set to minimal "1 seconds" by default but could be increased by the user if needed to give the modem enough time to detect the SIM card. This reverts commit 683b543a3b65 ("msm-modem-uim-selection: Don't wait for SIM (MR 2470)" but with a new configuration mechanism and a default of 1 second only. [ci:skip-build] already built successfully in CI
2021-11-16 10:31:48 +00:00
efbe0d23f2716e10f5ef0006c6eb21672a14e368ecceb74d296039bc539be2b35964af48efa0db69d0f410e7bee19ba0d69ab1ede43b9cfd443acde6997c8017 msm-modem-uim-selection.confd
9c91febb48409e574695bb04c989b361db9f7678321c6935772c19efae7dd16956bd4b91143b475adf898344225d4095448b95ccb824ced305966ea96b9ae32f msm-modem-uim-selection.initd
msm-modem: add UIM selection script (MR 2291) On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
2021-06-30 04:58:19 +00:00
2a511c2e249d0ec5a52f04ffe1ef3d29cf3c4813143b103e54879ff89176ea45b1a5ffe21cb7dc2f1cdd84c3102ba45ef9926ed37e00b1ae12a36d01de35ea5a udev-downstream.rules
"
Reference in a new issue Copy permalink