forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/soc-qcom-msm8916/APKBUILD

92 lines
3.3 KiB
Text
Raw Normal View History

device/soc-qcom-msm8916: update to ucm2, add support for qdsp6 (!907) Audio must be routed through QDSP6 when using the modem.
2020-01-15 18:26:28 +00:00
# Maintainer: Minecrell <minecrell@minecrell.net>
device/soc-qcom-msm8916: replace msm-modem-rpmsg with msm-modem (MR 2535) Starting with Linux 5.14, the modem can be controlled through the new WWAN subsystem in Linux with the WWAN RPMSG CTRL driver. This is also supported in ModemManager 1.18 and the pmOS fork of oFono. Drop the udev rules for the previous approach through the RPMSG chardev since this causes the modem to be detected twice by ModemManager and oFono.
2021-09-18 18:31:04 +00:00
# Co-Maintainer: Nikita Travkin <nikita@trvn.ru>
device/testing/soc-qcom-msm8916: upgrade (!1167) - Enable speaker on samsung-gt510wifi/matissevewifi - Replace deprecated mesa-dri-freedreno package with mesa-dri-gallium - Build natively (this is just a trivial copy)
2020-04-20 10:07:28 +00:00
pkgname=soc-qcom-msm8916
soc-qcom-msm8916: Add common packages for mainline MSM8916 devices (!582) Add main/linux-postmarketos-qcom-msm8916 as shared mainline kernel for all MSM8916 devices.
2019-06-23 10:58:45 +00:00
pkgdesc="Common package for Qualcomm MSM8916 devices"
samsung-{a3,a5}: also apply ModemManager "facility lock" workaround (MR 3021) It seems like at least samsung-a5 needs the same "facility lock" workaround as samsung-serranove, otherwise ModemManager can not detect the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916 and apply it to samsung-a3 as well just to be sure. So far this issue seems limited to Samsung devices, at least bq-paella is not affected (tested with the same SIM card), so it does not seem right to apply it unconditionally to all devices. [ci:skip-build] Already built successfuly on CI in MR
2022-03-23 18:46:24 +00:00
pkgver=16
device/soc-qcom-msm8916: replace msm-modem-rpmsg with msm-modem (MR 2535) Starting with Linux 5.14, the modem can be controlled through the new WWAN subsystem in Linux with the WWAN RPMSG CTRL driver. This is also supported in ModemManager 1.18 and the pmOS fork of oFono. Drop the udev rules for the previous approach through the RPMSG chardev since this causes the modem to be detected twice by ModemManager and oFono.
2021-09-18 18:31:04 +00:00
pkgrel=0
soc-qcom-msm8916: Add common packages for mainline MSM8916 devices (!582) Add main/linux-postmarketos-qcom-msm8916 as shared mainline kernel for all MSM8916 devices.
2019-06-23 10:58:45 +00:00
url="https://postmarketos.org"
device/soc-qcom-msm8916: update to ucm2, add support for qdsp6 (!907) Audio must be routed through QDSP6 when using the modem.
2020-01-15 18:26:28 +00:00
license="BSD-3-Clause"
device/soc-qcom-msm8916: enable on armv7 (!828)
2019-12-07 14:00:39 +00:00
arch="aarch64 armv7"
device/testing/soc-qcom-msm8916: upgrade (!1167) - Enable speaker on samsung-gt510wifi/matissevewifi - Replace deprecated mesa-dri-freedreno package with mesa-dri-gallium - Build natively (this is just a trivial copy)
2020-04-20 10:07:28 +00:00
options="!check !archcheck !tracedeps pmb:cross-native"
device/community: add swclock-offset dependency for affected SoCs (MR 2241) Set package dependency "swclock-offset" to "soc-qcom-msm8916" and "soc-qcom-sdm845". These SoC's have a read-only real-time clock (RTC). The package "swclock-offset" keeps an offset between the RTC and the system time.
2021-06-10 03:36:40 +00:00
depends="mesa-dri-gallium $pkgname-ucm swclock-offset"
community/soc-qcom-msm8916: introduce more flexible rproc selection (MR 2632) Add a replacement for the current "mainline" and "mainline-modem" kernel variants used for the MSM8916 devices. At the moment this is implemented using separate DTBs that are all maintained in the kernel. Unfortunately, this does not seem likely to be accepted upstream in the mainline kernel. They will expect to have only a single DTB that enables all available functionality. The "no-modem" variant is a minor but still very useful use case because it changes the audio routing: It allows audio to work without any firmware, with more control on sample rates, latency etc for advanced audio use cases. However, having a potentially enabled modem requires routing all audio through the modem. There are two separate DTBs needed for these two setups. To avoid burdening mainline with this use case, the idea is to apply the necessary DTB transformations as part of the lk2nd boot process. Mainline only contains the DTB with the full functionality (audio routed through modem). The soc-qcom-msm8916-rproc packages place a magic file at /boot/lk2nd_rproc_mode that is read by lk2nd. When the file contains "no-modem" lk2nd will transform the DTB to disable the modem and change the audio routing to bypass the modem. That way, this feature does not need to be considered in mainline at all but can still be offered as "nice to have" by lk2nd. It also simplifies the device packages because the selection is now common as part of the soc-qcom-msm8916 package. Together with a related pmbootstrap change there is a nice prompt for selecting one of these "rproc" providers: $ pmbootstrap init [...] Available providers for soc-qcom-msm8916-rproc (3): * all: Enable all remote processors (audio goes through modem) (**default**) * no-modem: Disable only modem (audio bypasses modem, ~80 MiB more RAM) * none: Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM) Provider [default]: ...
2021-10-24 10:15:55 +00:00
subpackages="
$pkgname-ucm
$pkgname-rproc-none:rproc_none
$pkgname-rproc-no-modem:rproc_no_modem
$pkgname-rproc-all:rproc_all
samsung-{a3,a5}: also apply ModemManager "facility lock" workaround (MR 3021) It seems like at least samsung-a5 needs the same "facility lock" workaround as samsung-serranove, otherwise ModemManager can not detect the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916 and apply it to samsung-a3 as well just to be sure. So far this issue seems limited to Samsung devices, at least bq-paella is not affected (tested with the same SIM card), so it does not seem right to apply it unconditionally to all devices. [ci:skip-build] Already built successfuly on CI in MR
2022-03-23 18:46:24 +00:00
soc-samsung-msm8916-modem-workaround:samsung_modem_workaround
community/soc-qcom-msm8916: introduce more flexible rproc selection (MR 2632) Add a replacement for the current "mainline" and "mainline-modem" kernel variants used for the MSM8916 devices. At the moment this is implemented using separate DTBs that are all maintained in the kernel. Unfortunately, this does not seem likely to be accepted upstream in the mainline kernel. They will expect to have only a single DTB that enables all available functionality. The "no-modem" variant is a minor but still very useful use case because it changes the audio routing: It allows audio to work without any firmware, with more control on sample rates, latency etc for advanced audio use cases. However, having a potentially enabled modem requires routing all audio through the modem. There are two separate DTBs needed for these two setups. To avoid burdening mainline with this use case, the idea is to apply the necessary DTB transformations as part of the lk2nd boot process. Mainline only contains the DTB with the full functionality (audio routed through modem). The soc-qcom-msm8916-rproc packages place a magic file at /boot/lk2nd_rproc_mode that is read by lk2nd. When the file contains "no-modem" lk2nd will transform the DTB to disable the modem and change the audio routing to bypass the modem. That way, this feature does not need to be considered in mainline at all but can still be offered as "nice to have" by lk2nd. It also simplifies the device packages because the selection is now common as part of the soc-qcom-msm8916 package. Together with a related pmbootstrap change there is a nice prompt for selecting one of these "rproc" providers: $ pmbootstrap init [...] Available providers for soc-qcom-msm8916-rproc (3): * all: Enable all remote processors (audio goes through modem) (**default**) * no-modem: Disable only modem (audio bypasses modem, ~80 MiB more RAM) * none: Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM) Provider [default]: ...
2021-10-24 10:15:55 +00:00
"
soc-qcom-msm8916: Add common packages for mainline MSM8916 devices (!582) Add main/linux-postmarketos-qcom-msm8916 as shared mainline kernel for all MSM8916 devices.
2019-06-23 10:58:45 +00:00
community/soc-qcom-msm8916: update ALSA UCM files (MR 3014) - alcatel-idol347: add headphones - Try to revert playback/capture priorities to maybe make automatic switching to headphones based on jack detection work a bit better. [ci:skip-build] Already built successfuly on CI in MR
2022-03-21 12:56:05 +00:00
_ucm_commit="23f9d6d4d12c13821d473d6f86908335d3a72026"
device/testing/soc-qcom-msm8916: install+enable q6voiced for modem (MR 1233) Make voice call audio work out of the box by starting q6voiced on all installations with the modem. It might be nice to start it only when oFono is installed and enabled, but q6voiced is quite minimal so it does not seem worth the effort.
2020-05-13 20:26:38 +00:00
source="$pkgname-$_ucm_commit.tar.gz::https://github.com/msm8916-mainline/alsa-ucm-conf/archive/$_ucm_commit.tar.gz
q6voiced.conf
samsung-{a3,a5}: also apply ModemManager "facility lock" workaround (MR 3021) It seems like at least samsung-a5 needs the same "facility lock" workaround as samsung-serranove, otherwise ModemManager can not detect the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916 and apply it to samsung-a3 as well just to be sure. So far this issue seems limited to Samsung devices, at least bq-paella is not affected (tested with the same SIM card), so it does not seem right to apply it unconditionally to all devices. [ci:skip-build] Already built successfuly on CI in MR
2022-03-23 18:46:24 +00:00
77-modem-samsung-msm8916.rules
community/soc-qcom-msm8916: add udev rule for pm8916 haptics (MR 2699) Feedbackd needs to know which device to use for haptics. Add an udev rule to mark haptics device in the pm8916.
2021-11-22 10:24:25 +00:00
90-feedbackd-pm8916.rules
device/testing/soc-qcom-msm8916: install+enable q6voiced for modem (MR 1233) Make voice call audio work out of the box by starting q6voiced on all installations with the modem. It might be nice to start it only when oFono is installed and enabled, but q6voiced is quite minimal so it does not seem worth the effort.
2020-05-13 20:26:38 +00:00
"
soc-qcom-msm8916: Add common packages for mainline MSM8916 devices (!582) Add main/linux-postmarketos-qcom-msm8916 as shared mainline kernel for all MSM8916 devices.
2019-06-23 10:58:45 +00:00
package() {
device/community/soc-qcom-msm8916: fork alsa-ucm-conf entirely (MR 1655) Upstream keeps making breaking changes in patch releases. Let's fork alsa-ucm-conf entirely for now instead of just patching in some files to ensure that these files don't break every few months. This fixes audio on MSM8916 devices when not using the modem.
2020-10-28 11:12:32 +00:00
mkdir -p "$pkgdir"
community/soc-qcom-msm8916: add udev rule for pm8916 haptics (MR 2699) Feedbackd needs to know which device to use for haptics. Add an udev rule to mark haptics device in the pm8916.
2021-11-22 10:24:25 +00:00
install -Dm644 "$srcdir"/90-feedbackd-pm8916.rules \
"$pkgdir"/usr/lib/udev/rules.d/90-feedbackd-pm8916.rules
device/community/soc-qcom-msm8916: fork alsa-ucm-conf entirely (MR 1655) Upstream keeps making breaking changes in patch releases. Let's fork alsa-ucm-conf entirely for now instead of just patching in some files to ensure that these files don't break every few months. This fixes audio on MSM8916 devices when not using the modem.
2020-10-28 11:12:32 +00:00
}
# Upstream keeps making breaking changes to UCM in patch releases.
# My last upstreaming efforts failed without ever getting a reply,
# since then UCM was entirely reworked like 3 times already...
# I don't want to fix this up every few months, so let's package a stable
# version for now. Once all the UCM refactoring upstream has settled down a bit
# we can investigate how to integrate it properly for upstreaming.
ucm() {
provides="alsa-ucm-conf"
cd "$srcdir/alsa-ucm-conf-$_ucm_commit"
mkdir -p "$subpkgdir"/usr/share/alsa
cp -r ucm2 "$subpkgdir"/usr/share/alsa
soc-qcom-msm8916: Add common packages for mainline MSM8916 devices (!582) Add main/linux-postmarketos-qcom-msm8916 as shared mainline kernel for all MSM8916 devices.
2019-06-23 10:58:45 +00:00
}
community/soc-qcom-msm8916: introduce more flexible rproc selection (MR 2632) Add a replacement for the current "mainline" and "mainline-modem" kernel variants used for the MSM8916 devices. At the moment this is implemented using separate DTBs that are all maintained in the kernel. Unfortunately, this does not seem likely to be accepted upstream in the mainline kernel. They will expect to have only a single DTB that enables all available functionality. The "no-modem" variant is a minor but still very useful use case because it changes the audio routing: It allows audio to work without any firmware, with more control on sample rates, latency etc for advanced audio use cases. However, having a potentially enabled modem requires routing all audio through the modem. There are two separate DTBs needed for these two setups. To avoid burdening mainline with this use case, the idea is to apply the necessary DTB transformations as part of the lk2nd boot process. Mainline only contains the DTB with the full functionality (audio routed through modem). The soc-qcom-msm8916-rproc packages place a magic file at /boot/lk2nd_rproc_mode that is read by lk2nd. When the file contains "no-modem" lk2nd will transform the DTB to disable the modem and change the audio routing to bypass the modem. That way, this feature does not need to be considered in mainline at all but can still be offered as "nice to have" by lk2nd. It also simplifies the device packages because the selection is now common as part of the soc-qcom-msm8916 package. Together with a related pmbootstrap change there is a nice prompt for selecting one of these "rproc" providers: $ pmbootstrap init [...] Available providers for soc-qcom-msm8916-rproc (3): * all: Enable all remote processors (audio goes through modem) (**default**) * no-modem: Disable only modem (audio bypasses modem, ~80 MiB more RAM) * none: Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM) Provider [default]: ...
2021-10-24 10:15:55 +00:00
rproc_none() {
pkgdesc="Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM)"
provides="soc-qcom-msm8916-rproc=$pkgver-r$pkgrel"
mkdir -p "$subpkgdir"/boot
echo none > "$subpkgdir"/boot/lk2nd_rproc_mode
}
rproc_no_modem() {
pkgdesc="Disable only modem (audio bypasses modem, ~80 MiB more RAM)"
provides="soc-qcom-msm8916-rproc=$pkgver-r$pkgrel"
provider_priority=50
mkdir -p "$subpkgdir"/boot
echo no-modem > "$subpkgdir"/boot/lk2nd_rproc_mode
}
rproc_all() {
pkgdesc="Enable all remote processors (audio goes through modem)"
provides="soc-qcom-msm8916-rproc=$pkgver-r$pkgrel"
provider_priority=100
device/soc-qcom-msm8916: replace msm-modem-rpmsg with msm-modem (MR 2535) Starting with Linux 5.14, the modem can be controlled through the new WWAN subsystem in Linux with the WWAN RPMSG CTRL driver. This is also supported in ModemManager 1.18 and the pmOS fork of oFono. Drop the udev rules for the previous approach through the RPMSG chardev since this causes the modem to be detected twice by ModemManager and oFono.
2021-09-18 18:31:04 +00:00
depends="msm-modem msm-modem-uim-selection q6voiced"
device/testing/soc-qcom-msm8916: install+enable q6voiced for modem (MR 1233) Make voice call audio work out of the box by starting q6voiced on all installations with the modem. It might be nice to start it only when oFono is installed and enabled, but q6voiced is quite minimal so it does not seem worth the effort.
2020-05-13 20:26:38 +00:00
install="$subpkgname.post-install"
community/soc-qcom-msm8916: introduce more flexible rproc selection (MR 2632) Add a replacement for the current "mainline" and "mainline-modem" kernel variants used for the MSM8916 devices. At the moment this is implemented using separate DTBs that are all maintained in the kernel. Unfortunately, this does not seem likely to be accepted upstream in the mainline kernel. They will expect to have only a single DTB that enables all available functionality. The "no-modem" variant is a minor but still very useful use case because it changes the audio routing: It allows audio to work without any firmware, with more control on sample rates, latency etc for advanced audio use cases. However, having a potentially enabled modem requires routing all audio through the modem. There are two separate DTBs needed for these two setups. To avoid burdening mainline with this use case, the idea is to apply the necessary DTB transformations as part of the lk2nd boot process. Mainline only contains the DTB with the full functionality (audio routed through modem). The soc-qcom-msm8916-rproc packages place a magic file at /boot/lk2nd_rproc_mode that is read by lk2nd. When the file contains "no-modem" lk2nd will transform the DTB to disable the modem and change the audio routing to bypass the modem. That way, this feature does not need to be considered in mainline at all but can still be offered as "nice to have" by lk2nd. It also simplifies the device packages because the selection is now common as part of the soc-qcom-msm8916 package. Together with a related pmbootstrap change there is a nice prompt for selecting one of these "rproc" providers: $ pmbootstrap init [...] Available providers for soc-qcom-msm8916-rproc (3): * all: Enable all remote processors (audio goes through modem) (**default**) * no-modem: Disable only modem (audio bypasses modem, ~80 MiB more RAM) * none: Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM) Provider [default]: ...
2021-10-24 10:15:55 +00:00
replaces="soc-qcom-msm8916-modem"
device/testing/soc-qcom-msm8916: install+enable q6voiced for modem (MR 1233) Make voice call audio work out of the box by starting q6voiced on all installations with the modem. It might be nice to start it only when oFono is installed and enabled, but q6voiced is quite minimal so it does not seem worth the effort.
2020-05-13 20:26:38 +00:00
community/soc-qcom-msm8916: introduce more flexible rproc selection (MR 2632) Add a replacement for the current "mainline" and "mainline-modem" kernel variants used for the MSM8916 devices. At the moment this is implemented using separate DTBs that are all maintained in the kernel. Unfortunately, this does not seem likely to be accepted upstream in the mainline kernel. They will expect to have only a single DTB that enables all available functionality. The "no-modem" variant is a minor but still very useful use case because it changes the audio routing: It allows audio to work without any firmware, with more control on sample rates, latency etc for advanced audio use cases. However, having a potentially enabled modem requires routing all audio through the modem. There are two separate DTBs needed for these two setups. To avoid burdening mainline with this use case, the idea is to apply the necessary DTB transformations as part of the lk2nd boot process. Mainline only contains the DTB with the full functionality (audio routed through modem). The soc-qcom-msm8916-rproc packages place a magic file at /boot/lk2nd_rproc_mode that is read by lk2nd. When the file contains "no-modem" lk2nd will transform the DTB to disable the modem and change the audio routing to bypass the modem. That way, this feature does not need to be considered in mainline at all but can still be offered as "nice to have" by lk2nd. It also simplifies the device packages because the selection is now common as part of the soc-qcom-msm8916 package. Together with a related pmbootstrap change there is a nice prompt for selecting one of these "rproc" providers: $ pmbootstrap init [...] Available providers for soc-qcom-msm8916-rproc (3): * all: Enable all remote processors (audio goes through modem) (**default**) * no-modem: Disable only modem (audio bypasses modem, ~80 MiB more RAM) * none: Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM) Provider [default]: ...
2021-10-24 10:15:55 +00:00
mkdir -p "$subpkgdir"/boot
echo all > "$subpkgdir"/boot/lk2nd_rproc_mode
device/testing/soc-qcom-msm8916: install+enable q6voiced for modem (MR 1233) Make voice call audio work out of the box by starting q6voiced on all installations with the modem. It might be nice to start it only when oFono is installed and enabled, but q6voiced is quite minimal so it does not seem worth the effort.
2020-05-13 20:26:38 +00:00
install -Dm644 q6voiced.conf "$subpkgdir"/etc/conf.d/q6voiced
device/soc-qcom-msm8916: add -modem subpackage (!907)
2020-01-18 11:33:38 +00:00
}
samsung-{a3,a5}: also apply ModemManager "facility lock" workaround (MR 3021) It seems like at least samsung-a5 needs the same "facility lock" workaround as samsung-serranove, otherwise ModemManager can not detect the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916 and apply it to samsung-a3 as well just to be sure. So far this issue seems limited to Samsung devices, at least bq-paella is not affected (tested with the same SIM card), so it does not seem right to apply it unconditionally to all devices. [ci:skip-build] Already built successfuly on CI in MR
2022-03-23 18:46:24 +00:00
samsung_modem_workaround() {
pkgdesc="Workaround for modem facility lock issue on some Samsung devices"
depends=""
install -Dm644 "$srcdir"/77-modem-samsung-msm8916.rules \
"$subpkgdir"/lib/udev/rules.d/77-modem-samsung-msm8916.rules
}
soc-qcom-msm8916: use msm-modem-uim-selection (MR 2291) Some msm8916 devices, primarily with two sim slots, require slot to be selected. Install uim-selection script for all msm8916 devices with modem enabled. [ci:skip-build] already built successfully in CI
2021-06-30 05:01:33 +00:00
sha512sums="
community/soc-qcom-msm8916: update ALSA UCM files (MR 3014) - alcatel-idol347: add headphones - Try to revert playback/capture priorities to maybe make automatic switching to headphones based on jack detection work a bit better. [ci:skip-build] Already built successfuly on CI in MR
2022-03-21 12:56:05 +00:00
807499a7620a0a7d51aa29fea157cf12f46bf4dcb05e5150f6c2355bf18d1805610988ad98d181e8ba69c8c9844e4d9a51f1553438d167ade89a387eabafd8f9 soc-qcom-msm8916-23f9d6d4d12c13821d473d6f86908335d3a72026.tar.gz
soc-qcom-msm8916: use msm-modem-uim-selection (MR 2291) Some msm8916 devices, primarily with two sim slots, require slot to be selected. Install uim-selection script for all msm8916 devices with modem enabled. [ci:skip-build] already built successfully in CI
2021-06-30 05:01:33 +00:00
3a4a9322839d4b3ef9d79668a37840a9f444954759ae3c512e694051d2f9a2573db42ad6c4c1a5c75eeb861232a27ba1a8cef9b503decd54ead25a96e3dd6f98 q6voiced.conf
samsung-{a3,a5}: also apply ModemManager "facility lock" workaround (MR 3021) It seems like at least samsung-a5 needs the same "facility lock" workaround as samsung-serranove, otherwise ModemManager can not detect the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916 and apply it to samsung-a3 as well just to be sure. So far this issue seems limited to Samsung devices, at least bq-paella is not affected (tested with the same SIM card), so it does not seem right to apply it unconditionally to all devices. [ci:skip-build] Already built successfuly on CI in MR
2022-03-23 18:46:24 +00:00
bcebc36ec62140f4620d462be2b95858adae380e5d74f6b9c9b956fb76a6541f39749f4dcec6ac3c39b868dbfed6fac7a34ba357510532a3df2d39f7ea818d55 77-modem-samsung-msm8916.rules
community/soc-qcom-msm8916: add udev rule for pm8916 haptics (MR 2699) Feedbackd needs to know which device to use for haptics. Add an udev rule to mark haptics device in the pm8916.
2021-11-22 10:24:25 +00:00
90fca4a3291a2c84c0b20e41308c4698374ba896e9365ca80dbfd0c0c4f7dc08317f3dd865a3c7f6707c81b02f5bb24136d1172253d2e4fdd50039bbbf02a178 90-feedbackd-pm8916.rules
soc-qcom-msm8916: use msm-modem-uim-selection (MR 2291) Some msm8916 devices, primarily with two sim slots, require slot to be selected. Install uim-selection script for all msm8916 devices with modem enabled. [ci:skip-build] already built successfully in CI
2021-06-30 05:01:33 +00:00
"
Reference in a new issue Copy permalink