forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/linux-xiaomi-armani/APKBUILD

77 lines
3.2 KiB
Text
Raw Normal View History

Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
# Kernel config based on: arch/arm/configs/lineageos_armani_defconfig
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours
2020-04-25 09:51:42 +00:00
pkgname=linux-xiaomi-armani
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
pkgver=3.4.0
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
pkgrel=4
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
pkgdesc="Redmi 1S kernel fork"
arch="armhf"
_carch="arm"
_flavor="xiaomi-armani"
url="https://kernel.org"
license="GPL2"
cross/arch-bin-masquerade, main/anbox-image, linux-*: use pmb:cross-native (MR 1169) https://gitlab.com/postmarketOS/pmbootstrap/-/issues/1910 [skip ci]: CI fails because it can't download every release tarball to check checksums in 3h.
2020-04-21 01:24:27 +00:00
options="!strip !check !tracedeps pmb:cross-native"
device/linux-*: use downstreamkernel_* helpers (!976) [ci:skip-build] [ci:skip-vercheck]
2020-02-18 08:34:06 +00:00
makedepends="perl sed installkernel bash gmp-dev bc linux-headers elfutils-dev devicepkg-dev dtbtool gcc6"
device/linux-*: make all kernels compile again All kernels compile again, after the GCC 8 upgrade. All 3.x kernels have been changed to use GCC 6 now, because we can't say for sure that they boot with GCC 8 even if we made them compile with that newer GCC. If someone wants to test a kernel for a newer device which they can test, see the instructions on <https://postmarketos.org/vendorkernel>. The linux-sony-castor-windy 4.x kernel did not compile out of the box with the latest GCC, so we set it to GCC 6 as well. This can probably be fixed easily. linux-teclast-x80-pro: removed Werror and updated to latest 4.14 kernel from kernel.org, otherwise this would not compile anymore (tested with both GCC 6 and 8, probably incompatibility with the latest binutils or something). This commit will take too long to compile in CI, so let's [skip ci]. I've compiled all kernels multiple times and fixed them up until all of them were working again. Related: #103
2018-10-01 06:44:18 +00:00
# Compiler: this kernel was only tested with GCC6. Feel free to make a merge
# request if you find out that it is booting working with newer GCCs as
# well. See <https://postmarketos.org/vendorkernel> for instructions.
if [ "${CC:0:5}" != "gcc6-" ]; then
CC="gcc6-$CC"
Revert "linux-*: use upstream gcc6 [skip ci]" This reverts commit ee659a5bb4ad94f33ec47e6ae7bf9e856f627155 and increases the pkgrels of all affected linux pmaports. I have compiled *every single kernel* that was modified with this commit, and it worked. That took 12 hours. So I'm pretty confident that this is a good commit. Let's roll it out and go back to stability \o/ I'll kick off the binary repo building directly after pushing this, but it will take some time until all binary packages are available again. [skip ci]: it wouldn't finish in time.
2018-11-30 20:56:06 +00:00
HOSTCC="gcc6-gcc"
device/linux-*: make all kernels compile again All kernels compile again, after the GCC 8 upgrade. All 3.x kernels have been changed to use GCC 6 now, because we can't say for sure that they boot with GCC 8 even if we made them compile with that newer GCC. If someone wants to test a kernel for a newer device which they can test, see the instructions on <https://postmarketos.org/vendorkernel>. The linux-sony-castor-windy 4.x kernel did not compile out of the box with the latest GCC, so we set it to GCC 6 as well. This can probably be fixed easily. linux-teclast-x80-pro: removed Werror and updated to latest 4.14 kernel from kernel.org, otherwise this would not compile anymore (tested with both GCC 6 and 8, probably incompatibility with the latest binutils or something). This commit will take too long to compile in CI, so let's [skip ci]. I've compiled all kernels multiple times and fixed them up until all of them were working again. Related: #103
2018-10-01 06:44:18 +00:00
CROSS_COMPILE="gcc6-$CROSS_COMPILE"
fi
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
# Source
_repository="android_kernel_xiaomi_armani"
_commit="0d17d5761449b14f31d00044e95753f3a6ad23b2"
device/linux-*: remove unneeded braces from variables (!1007) sed -i -E 's/\$\{(\w+)\}/$\1/g' linux-*/APKBUILD Manually revert ${CROSS_COMPILE} in linux-motorola-maserati.
2020-02-28 09:59:56 +00:00
_config="config-$_flavor.$arch"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
source="
device/linux-*: remove unneeded braces from variables (!1007) sed -i -E 's/\$\{(\w+)\}/$\1/g' linux-*/APKBUILD Manually revert ${CROSS_COMPILE} in linux-motorola-maserati.
2020-02-28 09:59:56 +00:00
$pkgname-$_commit.tar.gz::https://github.com/LineageOS/$_repository/archive/$_commit.tar.gz
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
$_config
compiler-gcc6.h
00_fix_return_address.patch
01_smd_private.patch
02_gpu-msm-fix-gcc5-compile.patch
03_qdsp6v2.patch
04_mdss_mdp_trace.patch
05_q6voice.patch
"
device/linux-*: remove unneeded braces from variables (!1007) sed -i -E 's/\$\{(\w+)\}/$\1/g' linux-*/APKBUILD Manually revert ${CROSS_COMPILE} in linux-motorola-maserati.
2020-02-28 09:59:56 +00:00
builddir="$srcdir/$_repository-$_commit"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
prepare() {
default_prepare
**/linux-*: update usage of downstreamkernel_prepare helper (!1084) [skip-ci]: just downloading all kernel sources takes about one hour and ollieparanoid wants to merge it now. This already ran successfully with [ci:skip-build] and [ci:skip-vercheck].
2020-04-01 07:09:30 +00:00
. downstreamkernel_prepare
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
}
build() {
unset LDFLAGS
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS"
# Generate master DTB (deviceinfo_bootimg_qcdt)
dtbTool -s 2048 -p "scripts/dtc/" -o "arch/arm/boot/dt.img" "arch/arm/boot/"
}
package() {
device/linux-*: use downstreamkernel_* helpers (!976) [ci:skip-build] [ci:skip-vercheck]
2020-02-18 08:34:06 +00:00
downstreamkernel_package "$builddir" "$pkgdir" "$_carch" "$_flavor"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
# Master DTB (deviceinfo_bootimg_qcdt)
install -Dm644 "$builddir/arch/arm/boot/dt.img" \
"$pkgdir/boot/dt.img"
# External modules install
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS" \
device/linux-*: various custom linter fixes (!1007)
2020-02-28 10:17:04 +00:00
INSTALL_MOD_PATH="$pkgdir" modules_install
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
}
sha512sums="360bf588a670cb7cd67b431c0f7cddb622d0364b3c5a0f0b9b6dd63d8b5dd7d365d6e075a1ce0652d13ce6a9d26cfb85d7b68eeb506d8e8e22aa667f57cdf0b2 linux-xiaomi-armani-0d17d5761449b14f31d00044e95753f3a6ad23b2.tar.gz
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
1ccf40515ef97e341a6bcd85619c63beb334e293adfdb75f3b2508e34d1f19f9c7ea1f11969c6f59379d72b86ba635835c71f85dd41616527485349dde7b780f config-xiaomi-armani.armhf
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
d80980e9474c82ba0ef1a6903b434d8bd1b092c40367ba543e72d2c119301c8b2d05265740e4104ca1ac5d15f6c4aa49e8776cb44264a9a28dc551e0d1850dcc compiler-gcc6.h
ea1d3b5a234fa565e3c1a792de48f4fc4e6023d281d303c8e319c7ef28edc5739ab0e4dea0139a41f0a5c7d03e27921ccaa214fd0ac5c72245a094ce60128864 00_fix_return_address.patch
39892cc41e484c51dccc29cadea475aaf99772bafb19231086b614b9eaee520843cd9361c89a6780229961e0ebf4bbf0e115d0e30f8302944b78091fcf7900e7 01_smd_private.patch
7be03a9e78b7ac330a54b1f00509caa0621a95c0c55901878ad757f9dd69cc05ba2c8b5ea987063ae1224f92c4d090d515fa5d369e7755181a4871b0d0f82881 02_gpu-msm-fix-gcc5-compile.patch
1465b7f08dd4d7956c6651da3767648db085f4af8014fd3b24547626ba608734a0c6d8e86ffe086d81817c29f0d8e284e21a3ba50f51cd94ab42935bc124ad30 03_qdsp6v2.patch
8dd3c227af5c379eedecdabe64a481de3e8241431b5d3d3984ffad65ee74706860115eb1b797afe05f6c360f6696bcb7165fa7d634a4a7a147d98f45cbb5246d 04_mdss_mdp_trace.patch
4e7484eaa142e013c9aee12053d91a65983f7629d2b923566d4431143fa0529988dbc28b01dee21336995090ce8127b2ba79208bf61df359632bfeebae9c6618 05_q6voice.patch"
Reference in a new issue Copy permalink