forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/modem/msm-modem/APKBUILD

34 lines
1 KiB
Text
Raw Normal View History

modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
pkgname=msm-modem
modem/msm-modem: expose serial AT port from DATA4 SMD channel (MR 1607) So far we have only created /dev/modem based on the DATA5_CNTL channel available from the modem. The DATAX_CNTL channels allow sending QMI messages to the modem. This is sufficient for oFono to work. Unfortunately, ModemManager currently does not support starting calls through the QMI interface. Instead, it uses serial AT commands that can be alternatively used on all USB-based Qualcomm modems. It turns out that we can also send serial AT commands through the RPMSG interface: the DATAX channels (without _CNTL) all respond to serial AT commands. We set it up at /dev/modem-at, configure ModemManager accordingly and then we are able to start calls. Yay!
2020-06-04 20:30:44 +00:00
pkgver=2
pkgrel=0
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
pkgdesc="Common support for Qualcomm MSM modems"
url="https://postmarketos.org/"
arch="armhf armv7 aarch64"
license="GPL-3.0-or-later"
modem/msm-modem: add rmtfs-openrc dependency (MR 1274) It is possible for msm-modem to get installed before rmtfs-openrc, which causes the following error in post-install: * rc-update: service `rmtfs' does not exist ERROR: msm-modem-1-r0.post-install: script exited with error 1 Add a dependency to ensure rmtfs-openrc gets installed first
2020-05-27 16:17:51 +00:00
depends="rmtfs rmtfs-openrc"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
install="$pkgname.post-install"
modem/msm-modem: rename msm-modem-mainline to msm-modem-rpmsg (MR 1356) Newer Qualcomm SoCs (e.g. SDM845. MSM8953) seem to use a different method to talk to the modem. There are no longer separate rpmsg/SMD channels for QMI messags, instead the modem is also available through QRTR. On these newer SoCs, installing msm-modem-mainline is pointless, because the created /dev/modem device will not actually allow communicating with the modem. However, you still need the part from the base package (msm-modem), which installs+enables rmtfs. To avoid confusion, rename the msm-modem-mainline subpackage to msm-modem-rpmsg. Install only "msm-modem" on SDM845 because that likely does not allow communication with the modem through RPMSG anyway.
2020-06-21 13:07:32 +00:00
subpackages="$pkgname-rpmsg $pkgname-downstream"
source="udev-rpmsg.rules udev-downstream.rules"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
options="!check"
package() {
mkdir -p "$pkgdir"
}
modem/msm-modem: rename msm-modem-mainline to msm-modem-rpmsg (MR 1356) Newer Qualcomm SoCs (e.g. SDM845. MSM8953) seem to use a different method to talk to the modem. There are no longer separate rpmsg/SMD channels for QMI messags, instead the modem is also available through QRTR. On these newer SoCs, installing msm-modem-mainline is pointless, because the created /dev/modem device will not actually allow communicating with the modem. However, you still need the part from the base package (msm-modem), which installs+enables rmtfs. To avoid confusion, rename the msm-modem-mainline subpackage to msm-modem-rpmsg. Install only "msm-modem" on SDM845 because that likely does not allow communication with the modem through RPMSG anyway.
2020-06-21 13:07:32 +00:00
rpmsg() {
pkgdesc="$pkgdesc (via RPMSG)"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
depends="$pkgname rpmsgexport"
modem/msm-modem: rename msm-modem-mainline to msm-modem-rpmsg (MR 1356) Newer Qualcomm SoCs (e.g. SDM845. MSM8953) seem to use a different method to talk to the modem. There are no longer separate rpmsg/SMD channels for QMI messags, instead the modem is also available through QRTR. On these newer SoCs, installing msm-modem-mainline is pointless, because the created /dev/modem device will not actually allow communicating with the modem. However, you still need the part from the base package (msm-modem), which installs+enables rmtfs. To avoid confusion, rename the msm-modem-mainline subpackage to msm-modem-rpmsg. Install only "msm-modem" on SDM845 because that likely does not allow communication with the modem through RPMSG anyway.
2020-06-21 13:07:32 +00:00
install -Dm644 "$srcdir/udev-rpmsg.rules" "$subpkgdir/usr/lib/udev/rules.d/55-$pkgname.rules"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
}
downstream() {
pkgdesc="$pkgdesc (downstream)"
depends="$pkgname libqipcrtr4msmipc libsmdpkt_wrapper"
install -Dm644 "$srcdir/udev-downstream.rules" "$subpkgdir/usr/lib/udev/rules.d/55-$pkgname.rules"
}
modem/msm-modem: expose serial AT port from DATA4 SMD channel (MR 1607) So far we have only created /dev/modem based on the DATA5_CNTL channel available from the modem. The DATAX_CNTL channels allow sending QMI messages to the modem. This is sufficient for oFono to work. Unfortunately, ModemManager currently does not support starting calls through the QMI interface. Instead, it uses serial AT commands that can be alternatively used on all USB-based Qualcomm modems. It turns out that we can also send serial AT commands through the RPMSG interface: the DATAX channels (without _CNTL) all respond to serial AT commands. We set it up at /dev/modem-at, configure ModemManager accordingly and then we are able to start calls. Yay!
2020-06-04 20:30:44 +00:00
sha512sums="11437625988fcf57aa0b70f11496c458d4516de16391c2869ae975362f282d21d3af521a41dea00312797d20d52be5112dbf0041986bfb40f3b9fa5948d2c695 udev-rpmsg.rules
2a511c2e249d0ec5a52f04ffe1ef3d29cf3c4813143b103e54879ff89176ea45b1a5ffe21cb7dc2f1cdd84c3102ba45ef9926ed37e00b1ae12a36d01de35ea5a udev-downstream.rules"
Reference in a new issue Copy permalink