forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-lg-hammerhead/APKBUILD

82 lines
2.3 KiB
Text
Raw Normal View History

device/device-lg-hammerhead: fix APKBUILD (!874)
2020-01-10 16:23:31 +00:00
# Reference: <https://postmarketos.org/devicepkg>
Added basic hammerhead config (NOT tested)
2017-05-30 15:40:44 +00:00
pkgname=device-lg-hammerhead
lg-hammerhead: add support for the modem (#1485) - depend on the firmware-lg-hammerhead-modem and firmware-lg-hammerhead-adsp - depend on the modem-qcom-msm-mainline-common Currently adsp firmware is not used actually given upstream kernel doesn't have support for adsp/sound subsystem. But it will be used eventually.
2018-05-12 13:12:40 +00:00
pkgver=2
testing/firmware-adreno: rename to -qcom-adreno-extra, split into subpkgs (MR 2625) Make the package consistent with firmware-qcom-adreno packaged from linux-firmware, but keep them separate for legal reasons. The firmware packaged in firmware-qcom-adreno-extra does not have a proper license. [ci:ignore-count] [ci:skip-build] already built successfully in CI
2021-10-23 08:08:54 +00:00
pkgrel=29
Added basic hammerhead config (NOT tested)
2017-05-30 15:40:44 +00:00
pkgdesc="Google Nexus 5"
Remove github.com references * Travis and Coveralls badges * aports: instead of <https://github.com/postmarketOS>, use <https://postmarketos.org> * References to full URLs to issues and pull requests replaced with a hash and the number * grsec check: simplify error message, remove link to github issue (nobody is using that anymore anyway)
2018-06-30 07:00:48 +00:00
url="https://postmarketos.org"
lg-hammerhead: switch arch to armv7 (!257)
2019-03-03 20:39:14 +00:00
arch="armv7"
Fix #49: Change license for device-lg-hammerhead from FIXME to MIT
2017-06-03 22:31:48 +00:00
license="MIT"
device-lg-hammerhead: cleanups for device package (MR 2508) - mesa-dri-freedreno => mesa-dri-gallium - msm-modem-rpmsg => msm-modem - add swclock-offset - sort deps list - remove ofono from deps, should be pulled in by UI package that needs it, not by device- package
2021-09-14 08:54:59 +00:00
depends="
linux-postmarketos-qcom-msm8974
mesa-dri-gallium
mkbootimg
postmarketos-base
swclock-offset
"
device/device-lg-hammerhead: fix APKBUILD (!874)
2020-01-10 16:23:31 +00:00
makedepends="devicepkg-dev"
lg-hammerhead: set phosh scale to 3 (!697)
2019-10-24 14:46:05 +00:00
subpackages="$pkgname-weston $pkgname-phosh $pkgname-x11 $pkgname-nonfree-firmware:nonfree_firmware"
Added bcmdhd calibration from google git
2017-06-28 22:16:22 +00:00
source="
device-lg-hammerhead: workaround to probe bluetooth reliably (MR 2015) Buetooth modules have to be probed after Wi-Fi ones.
2021-03-17 00:51:03 +00:00
bt-module-deps.conf
Added bcmdhd calibration from google git
2017-06-28 22:16:22 +00:00
deviceinfo
device-lg-hammerhead: remove unused file and sort sources (MR 2015) modules-load.conf was completely unused by this package, not installed anywhere. brcmfmac is loaded automatically anyway. Sort values in sources= alphabetically
2021-03-17 00:29:42 +00:00
rootston.ini
Fix #499: Don't generate weston.ini from the deviceinfo anymore (#739) @drebrez deserves much credit for this one for all the testing, bisecting and for fixing everything. Thank you very much! --- * devices which need a custom weston.ini ship it with a install_if subpackage, so it only gets installed when weston is installed. This sounds complicated, but is actually pretty clean in the APKBUILD. * postmarketos-ui-weston: has a weston.ini.default, which enables xwayland and uses fbdev as backend (because that's what most devices use!). It defaults to the weston.ini.default if there is no weston.ini (as installed by the device package). * changed spaces to tabs for consistency, general minor refactoring of device-APKBUILDs
2017-10-20 00:07:00 +00:00
weston.ini
[hammerhead] Redscreen kernel patch / xorg.conf / msm fb refresher (#924) * Added redscreen kernel patch and xorg config * Moved weston and x11 specific config to subpackage * Removed deviceinfo_weston_pixman_type for hammerhead * Added msm-fb-refresher to hammerhead
2017-12-05 20:00:59 +00:00
xorg.conf
Added bcmdhd calibration from google git
2017-06-28 22:16:22 +00:00
"
device-*: don't use noarch anymore Use the device's architecture instead of noarch. Because the device packages should never be built for other architectures, even if all depends can be built for other arches as well. This simplifies package building as part of the new build infrastructure effort. pmbootstrap has also been changed to output this by default in aportgen.
2018-11-07 06:45:58 +00:00
options="!check !archcheck"
Added basic hammerhead config (NOT tested)
2017-05-30 15:40:44 +00:00
device/device-lg-hammerhead: fix APKBUILD (!874)
2020-01-10 16:23:31 +00:00
build() {
devicepkg_build $startdir $pkgname
}
Added basic hammerhead config (NOT tested)
2017-05-30 15:40:44 +00:00
package() {
device/device-lg-hammerhead: fix APKBUILD (!874)
2020-01-10 16:23:31 +00:00
devicepkg_package $startdir $pkgname
Added basic hammerhead config (NOT tested)
2017-05-30 15:40:44 +00:00
}
[hammerhead] Redscreen kernel patch / xorg.conf / msm fb refresher (#924) * Added redscreen kernel patch and xorg config * Moved weston and x11 specific config to subpackage * Removed deviceinfo_weston_pixman_type for hammerhead * Added msm-fb-refresher to hammerhead
2017-12-05 20:00:59 +00:00
x11() {
install_if="$pkgname xorg-server"
depends="
libinput
xf86-input-libinput
lg-hamerhead: fix X11 UIs based on frammebuffer (!745) [ci:skip-build]: already built successfully in CI
2019-11-17 02:15:38 +00:00
xf86-video-fbdev
msm-fb-refresher"
[hammerhead] Redscreen kernel patch / xorg.conf / msm fb refresher (#924) * Added redscreen kernel patch and xorg config * Moved weston and x11 specific config to subpackage * Removed deviceinfo_weston_pixman_type for hammerhead * Added msm-fb-refresher to hammerhead
2017-12-05 20:00:59 +00:00
install -Dm644 "$srcdir"/xorg.conf \
"$subpkgdir"/etc/X11/xorg.conf.d/10-hammerhead.conf
}
lg-hammerhead: set phosh scale to 3 (!697)
2019-10-24 14:46:05 +00:00
phosh() {
device/device-lg-hammerhead: fix APKBUILD (!874)
2020-01-10 16:23:31 +00:00
install_if="$pkgname postmarketos-ui-phosh"
install -Dm644 "$srcdir"/rootston.ini \
"$subpkgdir"/etc/phosh/rootston.ini
lg-hammerhead: set phosh scale to 3 (!697)
2019-10-24 14:46:05 +00:00
}
Fix #499: Don't generate weston.ini from the deviceinfo anymore (#739) @drebrez deserves much credit for this one for all the testing, bisecting and for fixing everything. Thank you very much! --- * devices which need a custom weston.ini ship it with a install_if subpackage, so it only gets installed when weston is installed. This sounds complicated, but is actually pretty clean in the APKBUILD. * postmarketos-ui-weston: has a weston.ini.default, which enables xwayland and uses fbdev as backend (because that's what most devices use!). It defaults to the weston.ini.default if there is no weston.ini (as installed by the device package). * changed spaces to tabs for consistency, general minor refactoring of device-APKBUILDs
2017-10-20 00:07:00 +00:00
weston() {
install_if="$pkgname weston"
install -Dm644 "$srcdir"/weston.ini \
"$subpkgdir"/etc/xdg/weston/weston.ini
}
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
nonfree_firmware() {
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
pkgdesc="WiFi, GPU, Modem and ADSP firmware"
device-lg-hammerhead: cleanups for device package (MR 2508) - mesa-dri-freedreno => mesa-dri-gallium - msm-modem-rpmsg => msm-modem - add swclock-offset - sort deps list - remove ofono from deps, should be pulled in by UI package that needs it, not by device- package
2021-09-14 08:54:59 +00:00
depends="
testing/firmware-adreno: rename to -qcom-adreno-extra, split into subpkgs (MR 2625) Make the package consistent with firmware-qcom-adreno packaged from linux-firmware, but keep them separate for legal reasons. The firmware packaged in firmware-qcom-adreno-extra does not have a proper license. [ci:ignore-count] [ci:skip-build] already built successfully in CI
2021-10-23 08:08:54 +00:00
firmware-qcom-adreno-a330
device-lg-hammerhead: cleanups for device package (MR 2508) - mesa-dri-freedreno => mesa-dri-gallium - msm-modem-rpmsg => msm-modem - add swclock-offset - sort deps list - remove ofono from deps, should be pulled in by UI package that needs it, not by device- package
2021-09-14 08:54:59 +00:00
firmware-lg-hammerhead
firmware-lg-hammerhead-adsp
firmware-lg-hammerhead-modem
firmware-lg-hammerhead-bluetooth
linux-firmware-brcm
linux-firmware-cypress
linux-firmware-qcom
msm-modem
"
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
mkdir "$subpkgdir"
device-lg-hammerhead: workaround to probe bluetooth reliably (MR 2015) Buetooth modules have to be probed after Wi-Fi ones.
2021-03-17 00:51:03 +00:00
# This config makes sense only if non-free firmware is installed
install -Dm644 "$srcdir"/bt-module-deps.conf \
"$subpkgdir"/etc/modprobe.d/bt-module-deps.conf
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
}
device-lg-hammerhead: workaround to probe bluetooth reliably (MR 2015) Buetooth modules have to be probed after Wi-Fi ones.
2021-03-17 00:51:03 +00:00
sha512sums="6cef5f8ae1785ac16e6fe84bfc861ac50cdfb94db35d764f44a25c960e123cb82f6e56f45362a5340c62a3d5ac225f2689afd4f6964cb88305a0892ba44214f0 bt-module-deps.conf
a850782da69c99b9d9b5e405ce0e206568015e840597780fb0a4d20fba14cb8f7ce96abf6255796b8613cf46f4a1d48eab4147477fbe3f00cc06f567a82cab94 deviceinfo
device-lg-hammerhead: remove unused file and sort sources (MR 2015) modules-load.conf was completely unused by this package, not installed anywhere. brcmfmac is loaded automatically anyway. Sort values in sources= alphabetically
2021-03-17 00:29:42 +00:00
8ee9e4a5420aa6b00cef04848a94b7e9d7bfd98252ace23b181b757ee44d27d453a2fcd9dbbbe149f17cd8a596f3749d3425d4040167f9e303e5e66dc8cd9560 rootston.ini
[ui-weston] Set postmarketos artwork as default wallpaper (#1466)
2018-05-05 14:27:13 +00:00
4c22070223f39c419260a6817e5cc2b7881c095deeba031363a5634842dd175dd67eecace980849f0553de79110ef4e43a66143d71433805cd916c37fe7248e9 weston.ini
device-lg-hammerhead: remove unused file and sort sources (MR 2015) modules-load.conf was completely unused by this package, not installed anywhere. brcmfmac is loaded automatically anyway. Sort values in sources= alphabetically
2021-03-17 00:29:42 +00:00
0a9da551fa9d48d8a663f6bc74e8a7d6e2d2a6e009bd163fa46cd302e75656ad7ae57402a0bd70614ec253e0f2445b4c6999df07104f4c657ed630305c7f40d4 xorg.conf"
Reference in a new issue Copy permalink