forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/device-motorola-harpia/APKBUILD

58 lines
1.8 KiB
Text
Raw Normal View History

Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
# Reference: <https://postmarketos.org/devicepkg>
motorola-harpia: upgrade to mainline kernel (!682) Support for the downstream kernel has been removed entirely. This is because the downstream kernel only has support for the armhf architecture, whereas linux-postmarketos-qcom-msm8916 is only built for aarch64. Since pmbootstrap has no way to handle having two kernels on differing architectures, the decision was made to remove the downstream kernel and only support mainline.
2019-10-13 11:00:28 +00:00
# Maintainer: Ruby Iris Juric <ruby@srxl.me>
treewide: avoid "More than one maintainer" error (MR 1480) Alpine's abuild is soon going to complain if an APKBUILD has more than one "Maintainer:" listed. Work around it by renaming the additional maintainers to "Co-Maintainer:". While at it, move the devicepkg reference link to the top in device-xiaomi-santoni for consistency. In postmarketOS, we require at least two maintainers for devices in main, therefore it does not make sense to drop additional maintainers from the file. In Alpine, this change was made because pkgs.alpinelinux.org apparently can't handle more than one maintainer. I looked into it, and it would require a database change to add it there, so it does not seem worth the effort. I also thought about extending abuild to add an environment variable to skip the check, but then the package would not build with plain abuild without using the env var. Related: https://gitlab.alpinelinux.org/alpine/abuild/-/commit/dd4cd9d606f5e28f382414e258af562e346c6ab5 [ci:skip-build] [ci:skip-vercheck]
2020-08-04 09:46:27 +00:00
# Co-Maintainer: Minecrell <minecrell@minecrell.net>
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours
2020-04-25 09:51:42 +00:00
pkgname=device-motorola-harpia
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
pkgdesc="Motorola Moto G4 Play"
device/device-<msm8916-mainline>: minor cleanup and fixes (MR 1125) - Cleanup kernel cmdline: - earlycon can automatically detect the memory address of the UART controller based on the device tree - the comma before n8 in console=ttyMSM0,115200,n8 is actually invalid so this was not parsed correctly. However, it is the default anyway so we might as well remove it completely - Configure deviceinfo_getty for all devices - Workaround probe issue of display by adding a softdep on the panel module. This allows the display to work when excluding proprietary firmware (just a weird side effect, see comment in modprobe.conf...)
2020-04-04 16:00:14 +00:00
pkgver=3
treewide: bump pkgrel to generate new splashes (MR 1996)
2021-04-11 15:59:52 +00:00
pkgrel=2
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
url="https://postmarketos.org"
license="MIT"
motorola-harpia: upgrade to mainline kernel (!682) Support for the downstream kernel has been removed entirely. This is because the downstream kernel only has support for the armhf architecture, whereas linux-postmarketos-qcom-msm8916 is only built for aarch64. Since pmbootstrap has no way to handle having two kernels on differing architectures, the decision was made to remove the downstream kernel and only support mainline.
2019-10-13 11:00:28 +00:00
arch="aarch64"
device-*: don't use noarch anymore Use the device's architecture instead of noarch. Because the device packages should never be built for other architectures, even if all depends can be built for other arches as well. This simplifies package building as part of the new build infrastructure effort. pmbootstrap has also been changed to output this by default in aportgen.
2018-11-07 06:45:58 +00:00
options="!check !archcheck"
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
depends="postmarketos-base mkbootimg soc-qcom-msm8916"
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
makedepends="devicepkg-dev"
device/device-<msm8916-mainline>: minor cleanup and fixes (MR 1125) - Cleanup kernel cmdline: - earlycon can automatically detect the memory address of the UART controller based on the device tree - the comma before n8 in console=ttyMSM0,115200,n8 is actually invalid so this was not parsed correctly. However, it is the default anyway so we might as well remove it completely - Configure deviceinfo_getty for all devices - Workaround probe issue of display by adding a softdep on the panel module. This allows the display to work when excluding proprietary firmware (just a weird side effect, see comment in modprobe.conf...)
2020-04-04 16:00:14 +00:00
source="deviceinfo modprobe.conf"
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
subpackages="
$pkgname-kernel-mainline:kernel_mainline
$pkgname-kernel-mainline-modem:kernel_mainline_modem
$pkgname-nonfree-firmware:nonfree_firmware
$pkgname-nonfree-firmware-modem:nonfree_firmware_modem
"
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
}
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
kernel_mainline() {
device/*: clarify "close to mainline" (cosmetic) (MR 1408) Make it clear, that these kernels are not mainline, but "close to mainline". [ci:skip-build] [ci:skip-vercheck]: just changing pkgdesc Related: https://wiki.postmarketos.org/wiki/(Close_to)_Mainline
2020-07-11 09:16:39 +00:00
pkgdesc="Close to mainline kernel (no modem, audio routed directly)"
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
depends="linux-postmarketos-qcom-msm8916"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
kernel_mainline_modem() {
device/*: clarify "close to mainline" (cosmetic) (MR 1408) Make it clear, that these kernels are not mainline, but "close to mainline". [ci:skip-build] [ci:skip-vercheck]: just changing pkgdesc Related: https://wiki.postmarketos.org/wiki/(Close_to)_Mainline
2020-07-11 09:16:39 +00:00
pkgdesc="Close to mainline kernel (non-free modem, audio routed through ADSP)"
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
depends="linux-postmarketos-qcom-msm8916 soc-qcom-msm8916-modem"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
motorola-harpia: upgrade to mainline kernel (!682) Support for the downstream kernel has been removed entirely. This is because the downstream kernel only has support for the armhf architecture, whereas linux-postmarketos-qcom-msm8916 is only built for aarch64. Since pmbootstrap has no way to handle having two kernels on differing architectures, the decision was made to remove the downstream kernel and only support mainline.
2019-10-13 11:00:28 +00:00
nonfree_firmware() {
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
pkgdesc="GPU/Wi-Fi/Bluetooth/Video(/Modem) firmware"
motorola-harpia: upgrade to mainline kernel (!682) Support for the downstream kernel has been removed entirely. This is because the downstream kernel only has support for the armhf architecture, whereas linux-postmarketos-qcom-msm8916 is only built for aarch64. Since pmbootstrap has no way to handle having two kernels on differing architectures, the decision was made to remove the downstream kernel and only support mainline.
2019-10-13 11:00:28 +00:00
depends="linux-firmware-qcom firmware-motorola-harpia-wcnss firmware-motorola-harpia-venus"
mkdir "$subpkgdir"
}
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
nonfree_firmware_modem() {
pkgdesc="Modem firmware"
depends="firmware-motorola-harpia-modem"
install_if="$pkgname-nonfree-firmware $pkgname-kernel-mainline-modem"
mkdir "$subpkgdir"
}
device/*: Add deviceinfo_chassis variable (MR 1246) [ci:ignore-count], [ci:skip-build]
2020-05-17 13:33:49 +00:00
sha512sums="37fca3131876b7deeae86b0b7eec37ec649534cbfda85f6bc5c81e7066becb129752f019b528922f2d7d105f2879b38d3ad77080b42e3b89c3628709876acda6 deviceinfo
device/device-<msm8916-mainline>: minor cleanup and fixes (MR 1125) - Cleanup kernel cmdline: - earlycon can automatically detect the memory address of the UART controller based on the device tree - the comma before n8 in console=ttyMSM0,115200,n8 is actually invalid so this was not parsed correctly. However, it is the default anyway so we might as well remove it completely - Configure deviceinfo_getty for all devices - Workaround probe issue of display by adding a softdep on the panel module. This allows the display to work when excluding proprietary firmware (just a weird side effect, see comment in modprobe.conf...)
2020-04-04 16:00:14 +00:00
739d208365990a659a12b47013cc430d701bc5f202d5a7df93bf5db7628191d135825344087b93eb05f0db59d1d0e3adc0e49d102e294abf366902afd44251ab modprobe.conf"
Reference in a new issue Copy permalink