forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/linux-asus-me176c/APKBUILD

55 lines
2.1 KiB
Text
Raw Normal View History

asus-me176c: upgrade mainline kernel to 5.4.17 (LTS) (!922)
2020-02-02 13:49:05 +00:00
# Maintainer: Minecrell <minecrell@minecrell.net>
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
# Kernel config based on: https://github.com/me176c-dev/archlinux-me176c/blob/master/linux-me176c/config
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
_flavor="asus-me176c"
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours
2020-04-25 09:51:42 +00:00
pkgname=linux-$_flavor
device/testing/linux-asus-me176c: upgrade to 5.4.35 (MR 1180) [ci:skip-build] Already built on CI in MR
2020-04-24 10:19:00 +00:00
pkgver=5.4.35
asus-me176c: upgrade mainline kernel to 5.4.20, enable Anbox options (!942) The patch set for asus-me176c is really small at this point, and there is no need to make a new tag for each minor kernel update. Usually the previous patch set will still apply correctly. Refactor the APKBUILD to build the kernel similar to linux-lts in Alpine, and use the original kernel tarball together with a small patch file on top. Also enable Android-related options in the kernel so we can test Anbox on asus-me176c.
2020-02-10 12:33:06 +00:00
_kernver=${pkgver%.*}
_me176cver=5.4.17
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
pkgrel=0
pkgdesc="Mainline kernel fork for ASUS MeMO Pad 7 (ME176C(X))"
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
arch="x86_64"
_carch="x86_64"
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
url="https://github.com/me176c-dev/linux-me176c"
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
license="GPL-2.0-only"
Support Anbox explicitly in some kernels: (MR 1232) * linux-postmarketos-allwinner * linux-postmarketos-qcom-msm8916 * linux-asus-me176c They support anbox already. It will make CI catch errors such as the removal of anbox support in https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1205 when https://gitlab.com/postmarketOS/pmbootstrap/-/merge_requests/1916 will be merged. [ci:skip-vercheck] and [ci:skip-build]: no need to rebuild the package.
2020-05-13 16:32:23 +00:00
options="!strip !check !tracedeps pmb:cross-native pmb:kconfigcheck-anbox"
device/testing/linux-asus-me176c: upgrade to 5.4.35 (MR 1180) [ci:skip-build] Already built on CI in MR
2020-04-24 10:19:00 +00:00
makedepends="bison diffutils elfutils-dev flex gmp-dev installkernel linux-headers
mpc1-dev mpfr-dev openssl-dev perl xz"
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
# Source
source="
asus-me176c: upgrade mainline kernel to 5.4.20, enable Anbox options (!942) The patch set for asus-me176c is really small at this point, and there is no need to make a new tag for each minor kernel update. Usually the previous patch set will still apply correctly. Refactor the APKBUILD to build the kernel similar to linux-lts in Alpine, and use the original kernel tarball together with a small patch file on top. Also enable Android-related options in the kernel so we can test Anbox on asus-me176c.
2020-02-10 12:33:06 +00:00
https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/linux-$_kernver.tar.xz
linux-$pkgver.patch.xz::https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/patch-$pkgver.xz
https://github.com/me176c-dev/linux-me176c/releases/download/$_me176cver/linux-me176c-$_me176cver.patch.xz
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
config-$_flavor.$arch
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
"
asus-me176c: upgrade mainline kernel to 5.4.20, enable Anbox options (!942) The patch set for asus-me176c is really small at this point, and there is no need to make a new tag for each minor kernel update. Usually the previous patch set will still apply correctly. Refactor the APKBUILD to build the kernel similar to linux-lts in Alpine, and use the original kernel tarball together with a small patch file on top. Also enable Android-related options in the kernel so we can test Anbox on asus-me176c.
2020-02-10 12:33:06 +00:00
builddir="$srcdir/linux-$_kernver"
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
prepare() {
default_prepare
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
cp "$srcdir/config-$_flavor.$arch" .config
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
}
build() {
unset LDFLAGS
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION=$((pkgrel + 1 ))
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
}
package() {
asus-me176c: rework packages (!699) device/device-asus-me176c: - Install me176c-factory to apply correct MAC addresses for WiFi and BT - Use FAT32 for boot partition. This allows flashing the boot partition directly as ESP (EFI System Partition). - Overall cleanup device/linux-asus-me176c: - Update kernel fork to 4.19.80 - Cleanup APKBUILD - Stop building patched ACPI DSDT table directly into kernel firmware/firmware-asus-me176c: - Package WiFi firmware firmware/firmware-asus-me176c-acpi: - New package for the patched ACPI DSDT table -> Separate from firmware-asus-me176c because it is always required, (not optional) [ci:skip-build]: runs into timeout
2019-10-10 17:10:11 +00:00
mkdir -p "$pkgdir"/boot
make install modules_install \
ARCH="$_carch" \
INSTALL_PATH="$pkgdir"/boot \
INSTALL_MOD_PATH="$pkgdir"
rm -f "$pkgdir"/lib/modules/*/build "$pkgdir"/lib/modules/*/source
install -D "$builddir"/include/config/kernel.release \
"$pkgdir"/usr/share/kernel/$_flavor/kernel.release
New device: asus-me176cx (Asus MeMo Pad 7) (!123) Use upstream Linux with patches, which are needed for a lot of things. lambdadroid said he will upstream some of them, but the battery driver would need to be written from scratch, which is apparentely non-trivial. [skip ci]: kernel doesn't build under one hour (maybe too many modules are selected), but it does build eventually
2018-12-31 19:44:13 +00:00
}
asus-me176c: upgrade mainline kernel to 5.4.20, enable Anbox options (!942) The patch set for asus-me176c is really small at this point, and there is no need to make a new tag for each minor kernel update. Usually the previous patch set will still apply correctly. Refactor the APKBUILD to build the kernel similar to linux-lts in Alpine, and use the original kernel tarball together with a small patch file on top. Also enable Android-related options in the kernel so we can test Anbox on asus-me176c.
2020-02-10 12:33:06 +00:00
sha512sums="9f60f77e8ab972b9438ac648bed17551c8491d6585a5e85f694b2eaa4c623fbc61eb18419b2656b6795eac5deec0edaa04547fc6723fbda52256bd7f3486898f linux-5.4.tar.xz
device/testing/linux-asus-me176c: upgrade to 5.4.35 (MR 1180) [ci:skip-build] Already built on CI in MR
2020-04-24 10:19:00 +00:00
d697462715c01f40a4c85317f98ffb22d0eac6365041e286ed0d01afedab7285f7183c87cd6eb34971a66f6113d620ae7478bb946268d8f5889b062b7f0d4642 linux-5.4.35.patch.xz
asus-me176c: upgrade mainline kernel to 5.4.20, enable Anbox options (!942) The patch set for asus-me176c is really small at this point, and there is no need to make a new tag for each minor kernel update. Usually the previous patch set will still apply correctly. Refactor the APKBUILD to build the kernel similar to linux-lts in Alpine, and use the original kernel tarball together with a small patch file on top. Also enable Android-related options in the kernel so we can test Anbox on asus-me176c.
2020-02-10 12:33:06 +00:00
aa462bfcbba87469a617e2ffd4058cd41137b74f836aae47ac89bc70de2836b8f3ddce94f597e61bb287eb009bb71f4e831c487b0073011673d5db4a8d8ae080 linux-me176c-5.4.17.patch.xz
66b9350c59cc6853d8cf9efe98065df900e017d0e1ebf294b9de7a8bd888a6dee9589a8cfc0ac8ebdb757a1d710be2d7ec5b82169b525c3fa43601a6f57161a8 config-asus-me176c.x86_64"
Reference in a new issue Copy permalink