pmaports/device/testing/device-samsung-maguro/APKBUILD

# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-maguro
pkgver=3
pkgrel=8
pkgdesc="Google Galaxy Nexus (GSM)"
url="https://postmarketos.org"
arch="armv7"
license="MIT"
depends="postmarketos-base linux-samsung-maguro mkbootimg mesa-dri-gallium"
makedepends="devicepkg-dev"
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
source="deviceinfo"
options="!check !archcheck"

build() {
	devicepkg_build $startdir $pkgname
}

package() {
	devicepkg_package $startdir $pkgname
}

nonfree_firmware() {
	pkgdesc="Wifi firmware"
	depends="firmware-samsung-maguro"
	mkdir "$subpkgdir"
}

sha512sums="
f842c6093acb5c6132947edc408ebe004c8ec75b27932022abc1576a059db41a83da80bb12de0bd1636a983369984291f0f58b4dfbf5f4efc82943398c876789  deviceinfo
"
[samsung-maguro] Use devicepkg-dev, enable FIQ debugger (#1009) * [samsung-maguro] Enable FIQ debugger console mode * [samsung-maguro] Use devicepkg-dev and install mesa-dri-swrast 2017-12-15 22:51:51 +00:00			`# Reference: <https://postmarketos.org/devicepkg>`
maguro boots and i get telnet! 2017-06-01 19:03:21 +00:00			`pkgname=device-samsung-maguro`
samsung-maguro: migrate to armv7 architecture (!455) [ci:skip-build]: already built successfully in CI 2019-06-24 20:44:08 +00:00			`pkgver=3`
device-*: replace mesa-dri-swrast with mesa-dri-gallium (MR 3059) mesa-dri-swrast no longer exists and just installs, mesa-dri-gallium. However, this might not always be the case, so let's change it before it causes any issues. [ci:ignore-count] [ci:skip-build] 2022-04-05 16:34:43 +00:00			`pkgrel=8`
maguro boots and i get telnet! 2017-06-01 19:03:21 +00:00			`pkgdesc="Google Galaxy Nexus (GSM)"`
Remove github.com references * Travis and Coveralls badges * aports: instead of <https://github.com/postmarketOS>, use <https://postmarketos.org> * References to full URLs to issues and pull requests replaced with a hash and the number * grsec check: simplify error message, remove link to github issue (nobody is using that anymore anyway) 2018-06-30 07:00:48 +00:00			`url="https://postmarketos.org"`
samsung-maguro: migrate to armv7 architecture (!455) [ci:skip-build]: already built successfully in CI 2019-06-24 20:44:08 +00:00			`arch="armv7"`
maguro boots and i get telnet! 2017-06-01 19:03:21 +00:00			`license="MIT"`
device-*: replace mesa-dri-swrast with mesa-dri-gallium (MR 3059) mesa-dri-swrast no longer exists and just installs, mesa-dri-gallium. However, this might not always be the case, so let's change it before it causes any issues. [ci:ignore-count] [ci:skip-build] 2022-04-05 16:34:43 +00:00			`depends="postmarketos-base linux-samsung-maguro mkbootimg mesa-dri-gallium"`
[samsung-maguro] Use devicepkg-dev, enable FIQ debugger (#1009) * [samsung-maguro] Enable FIQ debugger console mode * [samsung-maguro] Use devicepkg-dev and install mesa-dri-swrast 2017-12-15 22:51:51 +00:00			`makedepends="devicepkg-dev"`
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore. 2018-02-26 22:11:44 +00:00			`subpackages="$pkgname-nonfree-firmware:nonfree_firmware"`
[samsung-maguro] Use devicepkg-dev, enable FIQ debugger (#1009) * [samsung-maguro] Enable FIQ debugger console mode * [samsung-maguro] Use devicepkg-dev and install mesa-dri-swrast 2017-12-15 22:51:51 +00:00			`source="deviceinfo"`
device-*: don't use noarch anymore Use the device's architecture instead of noarch. Because the device packages should never be built for other architectures, even if all depends can be built for other arches as well. This simplifies package building as part of the new build infrastructure effort. pmbootstrap has also been changed to output this by default in aportgen. 2018-11-07 06:45:58 +00:00			`options="!check !archcheck"`
maguro boots and i get telnet! 2017-06-01 19:03:21 +00:00
[samsung-maguro] Use devicepkg-dev, enable FIQ debugger (#1009) * [samsung-maguro] Enable FIQ debugger console mode * [samsung-maguro] Use devicepkg-dev and install mesa-dri-swrast 2017-12-15 22:51:51 +00:00			`build() {`
			`devicepkg_build $startdir $pkgname`
			`}`

maguro boots and i get telnet! 2017-06-01 19:03:21 +00:00			`package() {`
[samsung-maguro] Use devicepkg-dev, enable FIQ debugger (#1009) * [samsung-maguro] Enable FIQ debugger console mode * [samsung-maguro] Use devicepkg-dev and install mesa-dri-swrast 2017-12-15 22:51:51 +00:00			`devicepkg_package $startdir $pkgname`
			`}`

Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore. 2018-02-26 22:11:44 +00:00			`nonfree_firmware() {`
			`pkgdesc="Wifi firmware"`
			`depends="firmware-samsung-maguro"`
			`mkdir "$subpkgdir"`
			`}`

device/*: remove empty variables (MR 2534) [ci:ignore-count] [ci:skip-vercheck] [ci:skip-build]: built all the device packages successfully in CI already 2021-09-18 17:06:03 +00:00			`sha512sums="`
			`f842c6093acb5c6132947edc408ebe004c8ec75b27932022abc1576a059db41a83da80bb12de0bd1636a983369984291f0f58b4dfbf5f4efc82943398c876789 deviceinfo`
			`"`