forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/main/postmarketos-base/APKBUILD

151 lines
5.4 KiB
Text
Raw Normal View History

Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
pkgname=postmarketos-base
main/postmarketos-base: add dependency on wireless-regdb (MR 1974) CRDA in the kernel requires a regulatory database to be available to configure the WiFi card correctly following the regulations in each possible environment.
2021-02-22 17:24:27 +00:00
pkgver=10
postmarketos-base: replace elogind suspend hook with sleep-inhibitor (MR 1825) This adds sleep-inhibitor as a dependency when elogind is present, and installs a conf for it with some plugins enabled that are beneficial to devices running pmOS. The elogind suspend hook is dropped. This resolves issues where suspend is aborted in the hook *after* PrepareForSleep is sent over dbus (which might cause some things to disable radios/modems, etc for suspend). The 'period' in the conf is in minutes, a value of 0.1 is 6 seconds, which seems reasonable for releasing the lock when conditions for inhibiting no longer apply, without spinning the CPU too frequently.
2020-12-22 00:28:53 +00:00
pkgrel=0
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
pkgdesc="Meta package for minimal postmarketOS base"
Remove github.com references * Travis and Coveralls badges * aports: instead of <https://github.com/postmarketOS>, use <https://postmarketos.org> * References to full URLs to issues and pull requests replaced with a hash and the number * grsec check: simplify error message, remove link to github issue (nobody is using that anymore anyway)
2018-06-30 07:00:48 +00:00
url="https://postmarketos.org"
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
arch="noarch"
main/postmarketos-base: add pulseaudio and pulseaudio-alsa to enable audio (!621)
2019-09-10 13:49:11 +00:00
license="GPL-3.0-or-later"
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
depends="
alpine-base
Fix #588: Add chrony ntp client & timezone config (#674) This adds chrony as the ntp client (starting on boot), and also adds a prompt in the init step for configuring the timezone.
2017-10-13 19:18:24 +00:00
chrony
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
cryptsetup
main/postmarketos-base: depend on dnsmasq (MR 1438) dnsmasq is required by NetworkManager for WiFi Hotspot to work.
2020-07-22 16:20:35 +00:00
dnsmasq
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
eudev
haveged
main/postmarketos-base: stop the power key from shutting down devices (MR 1499) Pressing power button should not power off a device. Although it is expected on desktops and laptops, it isn't expected on phones and tablets. Instead it should just turn off the screen or go into a deep sleep, but that isn't handled by elogind. So let elogind just ignore the button altogether. Also re-order the dependencies alphabetically while we're touching the package anyway
2020-08-19 11:19:50 +00:00
networkmanager
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
openssh
postmarketos-mkinitfs
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
postmarketos-mvcfg
main/postmarketos-base: stop the power key from shutting down devices (MR 1499) Pressing power button should not power off a device. Although it is expected on desktops and laptops, it isn't expected on phones and tablets. Instead it should just turn off the screen or go into a deep sleep, but that isn't handled by elogind. So let elogind just ignore the button altogether. Also re-order the dependencies alphabetically while we're touching the package anyway
2020-08-19 11:19:50 +00:00
shadow
postmarketos-base: Execute setup-udev, remove mosh from dependencies (#647) * postmarketos-base: Execute setup-udev, remove mosh from dependencies * Run setup-udev [0], because that is what `setup-xorg-base` does [1]. It configures more than one OpenRC service and it also messes with the runlevels. Only after running that, Hildon works (tested in Qemu). [0]: https://github.com/alpinelinux/aports/blob/2fbea8b8dae00613de97862e509c6f76988ddeaf/main/eudev/setup-udev [1]: https://github.com/alpinelinux/alpine-conf/blob/06300dd48343364aee4136dd6dd36e251188e8b8/setup-xorg-base.in#L25 * Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone uses it right now, and it's easy to add custom packages in `pmbootstrap init` nowadays. * Minor style changes in the `APKBUILD` * [rx51] Remove udev-trigger service start
2017-09-29 16:10:09 +00:00
sudo
util-linux
Fix #199: Run weston with user instead of root (#707)
2017-10-07 16:14:49 +00:00
wpa_supplicant
main/postmarketos-base: add dependency on wireless-regdb (MR 1974) CRDA in the kernel requires a regulatory database to be available to configure the WiFi card correctly following the regulations in each possible environment.
2021-02-22 17:24:27 +00:00
wireless-regdb
main/postmarketos-base: remove unnecessary dependencies (!1018) These dependencies don't belong here. - iw: should be installed by the user themselves when wanted - nano: should be installed by the user themselves when wanted - pulseaudio: should be installed by the UI meta packages that need it instead - pulseaudio-alsa: should automatically be installed when both PulseAudio and alsa are installed https://gitlab.alpinelinux.org/alpine/aports/merge_requests/4820
2020-03-01 08:31:04 +00:00
"
main/postmarketos-base: add dummy post-upgrade (MR 1964) Add post-upgrade file with a warning, so we don't symlink it to the post-install script. [ci:skip-vercheck]: no need to rebuild the package Related: build.postmarketos.org#85
2021-02-17 15:46:03 +00:00
install="$pkgname.post-install $pkgname.pre-upgrade $pkgname.post-upgrade"
postmarketos-base: configure getty using deviceinfo_getty variable (!771) On some devices a getty should run on the serial console. Configure the getty by setting the deviceinfo_getty variable. The format is "<port>;<baud rate>". For example, "ttyS0;115200". A post-installation trigger in postmarketos-base checks /etc/deviceinfo, and modifies /etc/inittab if the device should run a getty.
2019-12-06 04:58:47 +00:00
triggers="$pkgname.trigger=/etc"
main/postmarketos-base: add tinydm config (MR 1795) Set postmarketOS default UID in tinydm config, so tinydm can be upstreamed to Alpine without hardcoding the pmOS default UID in the tinydm packaging.
2020-12-07 11:58:11 +00:00
subpackages="
$pkgname-elogind
$pkgname-tinydm
$pkgname-x11
"
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
options="!check"
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
replaces="
alpine-base
alpine-baselayout
busybox-initscripts
chrony
sudo
wpa_supplicant-openrc
"
replaces_priority=100 # leave plenty for alpine
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
_source044="
etc/sudoers
"
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
_source644="
etc/NetworkManager/conf.d/00-postmarketos.conf
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
etc/chrony/chrony.conf
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
etc/conf.d/swapfile
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
etc/conf.d/syslog
main/postmarketos-base: add tinydm config (MR 1795) Set postmarketOS default UID in tinydm config, so tinydm can be upstreamed to Alpine without hardcoding the pmOS default UID in the tinydm packaging.
2020-12-07 11:58:11 +00:00
etc/conf.d/tinydm
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
etc/conf.d/wpa_supplicant
etc/elogind/logind.conf
etc/fstab
etc/issue
etc/motd
postmarketos-base: replace elogind suspend hook with sleep-inhibitor (MR 1825) This adds sleep-inhibitor as a dependency when elogind is present, and installs a conf for it with some plugins enabled that are beneficial to devices running pmOS. The elogind suspend hook is dropped. This resolves issues where suspend is aborted in the hook *after* PrepareForSleep is sent over dbus (which might cause some things to disable radios/modems, etc for suspend). The 'period' in the conf is in minutes, a value of 0.1 is 6 seconds, which seems reasonable for releasing the lock when conditions for inhibiting no longer apply, without spinning the CPU too frequently.
2020-12-22 00:28:53 +00:00
etc/sleep-inhibitor.conf
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
etc/udev/rules.d/50-firmware.rules
main/postmarketos-base: ship os-release (MR 1522) Ship the /etc/os-release file from the postmarketos-base package instead of having it generated by pmbootstrap.
2020-08-31 14:47:22 +00:00
etc/os-release
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
"
_source755="
etc/init.d/deferred-initcalls
etc/init.d/swapfile
etc/polkit-1/rules.d/50-org.freedesktop.NetworkManager.rules
sbin/swapfile
usr/lib/firmwareload.sh
"
postmarketos-base: Enable NetworkManager by default (#388)
2018-03-04 11:07:21 +00:00
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
# Avoid filename based checksum conflicts by including the whole path:
# https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013
flatpath() {
local i
for i in $@; do
echo "rootfs-$i" | sed s./.-.g
done
}
postmarketos-base: add deferred-initcalls openrc service (!338) This script triggers late initialization of some platform drivers that cannot be probed at boot time, because for example they use firmware blobs on partitions that are not mounted during early kernel startup. Disabled by default, can be enabled on per-device basis.
2019-05-02 21:07:31 +00:00
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
source="$(flatpath $_source044 $_source644 $_source755)"
prepare() {
default_prepare
# setterm -powersave on -blank 5
echo -ne "\033[9;5]" >> rootfs-etc-issue
}
main/postmarketos-base: networkmanager permission fix (!777) This patch fixes nmtui and nm-applet not authorized to control networking. Signed-off-by: Danct12 <danct12@disroot.org>
2019-11-29 06:09:14 +00:00
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
package() {
local i
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
for i in $_source044; do
install -Dm044 "$srcdir/$(flatpath "$i")" "$pkgdir/$i"
done
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
for i in $_source644; do
install -Dm644 "$srcdir/$(flatpath "$i")" "$pkgdir/$i"
done
for i in $_source755; do
install -Dm755 "$srcdir/$(flatpath "$i")" "$pkgdir/$i"
done
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
postmarketos-mvcfg-package "$pkgdir" "$pkgname"
Put postmarketOS aports inside pmbootstrap repo Later, the aports folder will probably get split up in its own repository. But right now this is simply convenient.
2017-05-26 20:26:25 +00:00
}
Automatically install X11 and mesa dependencies (using install_if) (#696) * device-qemu-amd64: subpackages for x11 and mesa * postmarketos-base: add x11 subpackage
2017-10-06 18:19:47 +00:00
x11() {
main/postmarketos-base: fix install_if for subpkgs (MR 1713) Instead of install_if="$pkgname xorg-server" etc, it should be install_if="$pkgname=$pkgver-r$pkgrel xorg-server". Reference: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#install_if
2020-11-10 14:23:10 +00:00
install_if="$pkgname=$pkgver-r$pkgrel xorg-server"
Automatically install X11 and mesa dependencies (using install_if) (#696) * device-qemu-amd64: subpackages for x11 and mesa * postmarketos-base: add x11 subpackage
2017-10-06 18:19:47 +00:00
depends="
libinput
xf86-input-libinput
xf86-video-fbdev"
mkdir "$subpkgdir"
}
main/postmarketos-base: stop the power key from shutting down devices (MR 1499) Pressing power button should not power off a device. Although it is expected on desktops and laptops, it isn't expected on phones and tablets. Instead it should just turn off the screen or go into a deep sleep, but that isn't handled by elogind. So let elogind just ignore the button altogether. Also re-order the dependencies alphabetically while we're touching the package anyway
2020-08-19 11:19:50 +00:00
elogind() {
main/postmarketos-base: fix install_if for subpkgs (MR 1713) Instead of install_if="$pkgname xorg-server" etc, it should be install_if="$pkgname=$pkgver-r$pkgrel xorg-server". Reference: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#install_if
2020-11-10 14:23:10 +00:00
install_if="$pkgname=$pkgver-r$pkgrel elogind"
postmarketos-base: replace elogind suspend hook with sleep-inhibitor (MR 1825) This adds sleep-inhibitor as a dependency when elogind is present, and installs a conf for it with some plugins enabled that are beneficial to devices running pmOS. The elogind suspend hook is dropped. This resolves issues where suspend is aborted in the hook *after* PrepareForSleep is sent over dbus (which might cause some things to disable radios/modems, etc for suspend). The 'period' in the conf is in minutes, a value of 0.1 is 6 seconds, which seems reasonable for releasing the lock when conditions for inhibiting no longer apply, without spinning the CPU too frequently.
2020-12-22 00:28:53 +00:00
depends="sleep-inhibitor"
install="$subpkgname.pre-upgrade $subpkgname.post-install"
replaces="
elogind
sleep-inhibitor
"
postmarketos-base: add elogind hook to conditionally cancel suspend (MR 1665) This hook will cancel a suspend if: - There's an open ssh connection to the system - apk database is locked
2020-10-30 04:03:29 +00:00
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
amove etc/elogind/logind.conf
postmarketos-base: replace elogind suspend hook with sleep-inhibitor (MR 1825) This adds sleep-inhibitor as a dependency when elogind is present, and installs a conf for it with some plugins enabled that are beneficial to devices running pmOS. The elogind suspend hook is dropped. This resolves issues where suspend is aborted in the hook *after* PrepareForSleep is sent over dbus (which might cause some things to disable radios/modems, etc for suspend). The 'period' in the conf is in minutes, a value of 0.1 is 6 seconds, which seems reasonable for releasing the lock when conditions for inhibiting no longer apply, without spinning the CPU too frequently.
2020-12-22 00:28:53 +00:00
amove etc/sleep-inhibitor.conf
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
postmarketos-mvcfg-package "$subpkgdir" "$subpkgname"
main/postmarketos-base: stop the power key from shutting down devices (MR 1499) Pressing power button should not power off a device. Although it is expected on desktops and laptops, it isn't expected on phones and tablets. Instead it should just turn off the screen or go into a deep sleep, but that isn't handled by elogind. So let elogind just ignore the button altogether. Also re-order the dependencies alphabetically while we're touching the package anyway
2020-08-19 11:19:50 +00:00
}
main/postmarketos-base: add tinydm config (MR 1795) Set postmarketOS default UID in tinydm config, so tinydm can be upstreamed to Alpine without hardcoding the pmOS default UID in the tinydm packaging.
2020-12-07 11:58:11 +00:00
tinydm() {
install_if="$pkgname=$pkgver-r$pkgrel tinydm-openrc"
replaces="tinydm-openrc"
amove etc/conf.d/tinydm
}
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
sha512sums="e529f5cef1f31481b577f99b8917704f2cfefb963d98bf40a14b017938e55a00134d2033f81d2cb0b8489c5e9b4a92fdc0a788013f1adb4cd46d9580c9988186 rootfs-etc-sudoers
67a031f309a3232ac1e8abc3fedeaee912c035f9c81b4f709248895905a27ab5844ec92c65e55b79af3894450ba3883549d4004f11efebb47114d41f730e4a5f rootfs-etc-NetworkManager-conf.d-00-postmarketos.conf
e5d049db1d82c510bab9246208b51b8ec2711d008d67792fc10d4c0b65ed4dece7b5ae3c3dd28a8539d177b6849c1f921cb9fef3d2c7bee0355451f7b4757ec6 rootfs-etc-chrony-chrony.conf
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
e0d2d48b82a03239a4c0a00acaf83e00d397c23a8d7c71053d4e2a383357c22dcedef9e81b0e12a1d7514e1fdbe0bb3eb82613d18b29034a7ce5447f13c84a53 rootfs-etc-conf.d-swapfile
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
e4576c58c35f80bedddb1e89e186f37d31a186d3e9eb046581b8c5d7b7d435e18924539e851d3e67dc0ede80f9d44d16bd9ef52e73350d3f13224edc31d73a34 rootfs-etc-conf.d-syslog
main/postmarketos-base: add tinydm config (MR 1795) Set postmarketOS default UID in tinydm config, so tinydm can be upstreamed to Alpine without hardcoding the pmOS default UID in the tinydm packaging.
2020-12-07 11:58:11 +00:00
44e4283c6f77de83915977dd3bc2d8e2d96b3ed6cc68d3cc156304359ae649b5a8b0bac843e517ec6faa2066dd43ba85e313899b1eda04862f864fb9eb508aa0 rootfs-etc-conf.d-tinydm
main/postmarketos-base: remove post-install config overrides (MR 1713) Do not change config files in post-install scripts anymore (with sed commands or by other means). Instead, ship the files inside the packages and use "replaces", so apk allows the package to overwrite files from other packages: https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces Notes on specific files: * /etc/elogind/logind.conf: original file only consists of commented out compile defaults. Copy them over for now. In the future we should be able to install our own config into a .d directory, without all the comments: https://github.com/elogind/elogind/commit/8358fc595027145bf1f3ff572a4c3f23b232830a * /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk entries, which are not useful for postmarketOS: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD * /etc/motd: reformat the text, add link to the chat * /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"', make the override file as if the sed statement from post-install was executed * /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches this file. We probably added it back in 2017 in relation to enabling D-Bus (though the PR does not mention it explicity), but at least with the current init.d script of NetworkManager, we can simply have '-u' in wpa_supplicant_args: https://github.com/postmarketOS/pmbootstrap/pull/578 https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd * /etc/sudoers: base on original /etc/sudoers, but remove all the commented out stuff except for the visudo note at the top. We could also put a file in /etc/sudoers.d, but since the wheel line is present in the original /etc/sudoers and only commented out, it would be kind of unexpected to enable it in a file in /etc/sudoers.d. I prefer this stripped down version of the file, that is easy to read.
2020-11-10 14:08:28 +00:00
fe0651904c1f40ffa67d83daca190af199f63247e53642a59a1e1147cd06776fcf20b7b2fcc5373783d50b8bd6ce8d1354c8e5f4d582d319727b9ceefd1e8e16 rootfs-etc-conf.d-wpa_supplicant
8d2c54fe3ca62c62f8337fb6be28479d0e02ea63f32abae81907f2768631e65c9e17485f8bc0854a013377f729b06dd1873e2b75f86f657ece866d00aecbbdb4 rootfs-etc-elogind-logind.conf
9b8d0493bb64457fe176fea801e0771d3c5279302c61559824bf81b3d2b66d2c1e076f4aaac65f55389005acb18c27e44bed858c2bdbad37d74199f07c86c354 rootfs-etc-fstab
45bd0742a64a9d3c4a88e152b97edcf3fa1edca28884f9ea69e7c4c365f1e41ef9056dbe204545de7d4b2ba92e1e5872b2a929c2dcc1dd468e627cc3f090b8e6 rootfs-etc-issue
main/postmarketos-base: update motd for the cheatsheet (MR 1961)
2021-02-17 00:34:05 +00:00
01403df3b5a2be0dd70387a3c32cf24a77bc097679fbefca585082a0970b7d756723c33687be3809351b5e31c85947db84861118bfeced8f5f865fe2452555ec rootfs-etc-motd
postmarketos-base: replace elogind suspend hook with sleep-inhibitor (MR 1825) This adds sleep-inhibitor as a dependency when elogind is present, and installs a conf for it with some plugins enabled that are beneficial to devices running pmOS. The elogind suspend hook is dropped. This resolves issues where suspend is aborted in the hook *after* PrepareForSleep is sent over dbus (which might cause some things to disable radios/modems, etc for suspend). The 'period' in the conf is in minutes, a value of 0.1 is 6 seconds, which seems reasonable for releasing the lock when conditions for inhibiting no longer apply, without spinning the CPU too frequently.
2020-12-22 00:28:53 +00:00
041e50a7f78f7f03153175027439fc203f3dc81ed9970c579a16728d36e006e77f49b0321ee4bb7bb127fa6e4c31de3e7029f80ea75c4afc83bae7d24906372d rootfs-etc-sleep-inhibitor.conf
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
0b098828080055d3646ea54891cb0e1b578cbc30f5e16f7284f2814c08192f18079a38fb686d192715ae6a3d2cd6625d9e3cf99f234a6f0d94088bb0cb2ce43d rootfs-etc-udev-rules.d-50-firmware.rules
main/postmarketos-base: ship os-release (MR 1522) Ship the /etc/os-release file from the postmarketos-base package instead of having it generated by pmbootstrap.
2020-08-31 14:47:22 +00:00
75451751862a084415212bf2f90fdb4dac6a75bb063a411e15c9060f8c7f0b0b8c994dd6ba964d00a249eb80f5a0665d9cfdf75923af6de47f9723b10e61e9a7 rootfs-etc-os-release
main/postmarketos-base: put full path in filenames (MR 1713) Refactor the install code to be generic, so we only need to add the new path in one place when adding a new file. Put the full path into the filename to make this possible. I've tried to mimic the final directory structure in the aport first (e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile), but that leads to conflicts as abuild only takes the filename for checksums (conflict with etc/conf.d/swapfile): https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013 We don't really need checksum verification for the files shipped in the same directory (not downloaded), but nevertheless this is a bug. It leads to confusing behavior and might be fixed by letting abuild demand that there is only one source file with the same name, as I suggested in the issue linked above. So let's avoid this altogether with the flat file name.
2020-11-10 11:38:43 +00:00
5fd6dd7f9941e975a6ce559924eb252606943276dc09455bbeb05ff718ecd28f20a08eee8e04ca580e5af71d4c944c256ec04f07b07286394f5dfedfa59273e7 rootfs-etc-init.d-deferred-initcalls
f5cc0f1265955d2646e5f099dd4b5d4c287945bfc18c16044db57670d456f55c678fc11cc59e6dab3fa340832ce869d516302a3a35c13518539ed0cedca51819 rootfs-etc-init.d-swapfile
7b34e861bc4ec57d970d2a7aacca36e3c3742a63ff995af1336f80b666e4a38c1035b35e129322e0d62dc75011bfaf495eb2bcae5392f2bf39f1d7b1400afcce rootfs-etc-polkit-1-rules.d-50-org.freedesktop.NetworkManager.rules
3ceeee37f558e7c95ad973692b6a437f997e6b46c3d1c2257ddfb1529a5633477373aa123c7f08164e818daae50acb203d151379f27ca11bd458809e6a0d4de7 rootfs-sbin-swapfile
postmarketos-base: replace elogind suspend hook with sleep-inhibitor (MR 1825) This adds sleep-inhibitor as a dependency when elogind is present, and installs a conf for it with some plugins enabled that are beneficial to devices running pmOS. The elogind suspend hook is dropped. This resolves issues where suspend is aborted in the hook *after* PrepareForSleep is sent over dbus (which might cause some things to disable radios/modems, etc for suspend). The 'period' in the conf is in minutes, a value of 0.1 is 6 seconds, which seems reasonable for releasing the lock when conditions for inhibiting no longer apply, without spinning the CPU too frequently.
2020-12-22 00:28:53 +00:00
38dc75c0ed32b76dccd3d8e7e8173e8b7d91847cf2b07123f376b95af46b4f89798b24f45302a0726fdc1cf253aecaac140f431735ac5c6511553f790badd0af rootfs-usr-lib-firmwareload.sh"
Reference in a new issue Copy permalink