forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/main/postmarketos-base-ui/APKBUILD

185 lines
6.8 KiB
Text
Raw Normal View History

postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
# Maintainer: Clayton Craft <clayton@craftyguy.net>
pkgname=postmarketos-base-ui
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
pkgver=9
main/postmarketos-base-ui: configure openrc-settingsd for chronyd (MR 3953) We need to tell openrc-settingsd which ntp service to use, otherwise it'll default to busybox ntpd which we don't want. Additionally make sure openrc-settingsd service gets launched at boot with the post-install/post-upgrade script. [ci:skip-build]: already built successfully in CI
2023-03-14 19:49:31 +00:00
pkgrel=0
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
pkgdesc="Meta package for minimal postmarketOS UI base"
url="https://postmarketos.org"
arch="noarch"
license="GPL-3.0-or-later"
depends="
chrony
dbus
main/*: depend on font-dejavu (MR 3521) renamed in aports@ee78772612
2022-10-11 01:42:18 +00:00
font-dejavu
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
haveged
nftables
main/postmarketos-base-ui: add pmOS icon dependency (MR 2867) Also properly sort the dependencies alphabetically while we're at it.
2022-01-20 09:17:09 +00:00
postmarketos-artwork-icons
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
postmarketos-base
shadow
util-linux
wireless-regdb
main/postmarketos-base-ui: add pmOS icon dependency (MR 2867) Also properly sort the dependencies alphabetically while we're at it.
2022-01-20 09:17:09 +00:00
wpa_supplicant
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
"
subpackages="
$pkgname-elogind
main/postmarketos-base-ui: configure openrc-settingsd for chronyd (MR 3953) We need to tell openrc-settingsd which ntp service to use, otherwise it'll default to busybox ntpd which we don't want. Additionally make sure openrc-settingsd service gets launched at boot with the post-install/post-upgrade script. [ci:skip-build]: already built successfully in CI
2023-03-14 19:49:31 +00:00
$pkgname-openrc-settingsd:_openrc_settingsd
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
$pkgname-tinydm
$pkgname-x11
$pkgname-pulseaudio
postmarketos-base-ui: install obexd and obex-capabilities (MR 2245) Install obex-capabilities and a modified DBus Service for BlueZ's obexd when BlueZ OBEX support is installed. UIs depending on BlueZ are now also depending on bluez-obexd for OBEX support through various MRs at Alpine.
2021-06-11 19:00:21 +00:00
$pkgname-bluez-obexd:_obexd
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
$pkgname-networkmanager
main/pmos-base-ui: add postmarketos-default-camera dummy package (MR 3815) This is a dummy package that other packages can install_if on to install the appropriate camera app for the device/UI. It's intended to be added to pmb_recommends= for pmos-ui-* packages that want to have a camera by default.
2023-02-01 08:14:38 +00:00
postmarketos-default-camera:_default_camera
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
"
install="$pkgname.post-install $pkgname.post-upgrade"
replaces="
chrony
wpa_supplicant-openrc
postmarketos-base
"
replaces_priority=100 # leave plenty for alpine
_source644="
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
etc/NetworkManager/conf.d/hostname-mode.conf
pmos-base-ui-networkmanager: set up dnsmasq for filtering lookups (MR 3823) This uses a dispatcher script to configure filtering A and AAAA records based on which IP versions are routable on the NM primary connection. gojq is preferred over the 'standard' jq because it's considerably faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s with gojq. the difference is probably greater on slower phones... so it seemed worth installing it. fixes #1430 Co-authored-by: Arnavion <me@arnavion.dev>
2023-01-25 08:14:08 +00:00
etc/NetworkManager/conf.d/use-dnsmasq.conf
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
etc/NetworkManager/conf.d/tethering.conf
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
etc/chrony/chrony.conf
main/postmarketos-base-ui: configure openrc-settingsd for chronyd (MR 3953) We need to tell openrc-settingsd which ntp service to use, otherwise it'll default to busybox ntpd which we don't want. Additionally make sure openrc-settingsd service gets launched at boot with the post-install/post-upgrade script. [ci:skip-build]: already built successfully in CI
2023-03-14 19:49:31 +00:00
etc/conf.d/openrc-settingsd
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
etc/conf.d/tinydm
etc/conf.d/wpa_supplicant
etc/elogind/logind.conf
main/postmarketos-base-ui: simplify pulseaudio config (MR 3412) config scripts in /etc/pulse/default.pa.d are loaded automatically by default.pa
2022-09-08 00:05:26 +00:00
etc/pulse/default.pa.d/postmarketos.pa
main/postmarketos-base-ui: add "$HOME/.local/bin" to $PATH (MR 2445) This directory is specified by the XDG Base Directory specification (https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html). Quoting: > User-specific executable files may be stored in $HOME/.local/bin. > Distributions should ensure this directory shows up in the UNIX $PATH environment variable, at an appropriate place. So let's actually do this. This way also binaries installed by e.g. Pip or Cargo will be usable out-of-the-box rather than that the user has to figure out why it's not appearing in their PATH.
2021-08-17 11:26:14 +00:00
etc/skel/.profile
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
etc/sleep-inhibitor.conf
main/postmarketos-base-ui: add Xwrapper script for X11 (MR 2773) Xorg needs an Xwrapper.config script with the line 'needs_root_rights=yes' to get tinydm + sxmo to work
2021-12-19 15:32:36 +00:00
etc/X11/Xwrapper.config
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
"
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
_source600="
usr/lib/NetworkManager/system-connections/USB_Networking.nmconnection
"
main/postmarketos-base: add Firefox env config to -tinydm subpackage (MR 2235) Currently, this only sets Firefox to run in Wayland mode, but in the future it might be used to make e.g. SDL applications run in Wayland mode. SDL applications are not set to run in Wayland mode right no as SDL 1.2 uses the same environment variable as SDL 2.0 for controlling video driver (SDL_VIDEODRIVER) and SDL 1.2 does not support Wayland and crashes if an invalid value is provided for SDL_VIDEODRIVER, and as such setting SDL_VIDEODRIVER=wayland globally would break all SDL 1.2 applications. This will however be fixed once SDL 1.2 is replaced by sdl12-compat in Alpine, as sdl12-compat implements the SDL 1.2 API and ABI via SDL 2.0 and as such supports Wayland. As such, once this happens we can start setting SDL_VIDEODRIVER=wayland. [ci:skip-build] already built successfully in CI
2021-06-27 19:41:19 +00:00
_source755="
pmos-base-ui-networkmanager: set up dnsmasq for filtering lookups (MR 3823) This uses a dispatcher script to configure filtering A and AAAA records based on which IP versions are routable on the NM primary connection. gojq is preferred over the 'standard' jq because it's considerably faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s with gojq. the difference is probably greater on slower phones... so it seemed worth installing it. fixes #1430 Co-authored-by: Arnavion <me@arnavion.dev>
2023-01-25 08:14:08 +00:00
etc/NetworkManager/dispatcher.d/99-dns-filter.sh
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
etc/NetworkManager/dispatcher.d/85-tethering
main/postmarketos-base: add Firefox env config to -tinydm subpackage (MR 2235) Currently, this only sets Firefox to run in Wayland mode, but in the future it might be used to make e.g. SDL applications run in Wayland mode. SDL applications are not set to run in Wayland mode right no as SDL 1.2 uses the same environment variable as SDL 2.0 for controlling video driver (SDL_VIDEODRIVER) and SDL 1.2 does not support Wayland and crashes if an invalid value is provided for SDL_VIDEODRIVER, and as such setting SDL_VIDEODRIVER=wayland globally would break all SDL 1.2 applications. This will however be fixed once SDL 1.2 is replaced by sdl12-compat in Alpine, as sdl12-compat implements the SDL 1.2 API and ABI via SDL 2.0 and as such supports Wayland. As such, once this happens we can start setting SDL_VIDEODRIVER=wayland. [ci:skip-build] already built successfully in CI
2021-06-27 19:41:19 +00:00
etc/tinydm.d/env-wayland.d/50-firefox-wayland.sh
main/postmarketos-base-ui: run SDL in Wayland mode by default (MR 2669) This is possible now that all SDL (1) applications use sdl12-compat instead of "classic" SDL 1.2. Note that this only is applied to user interfaces that use Wayland and are launched through tinydm. See https://gitlab.alpinelinux.org/alpine/aports/-/issues/12739
2021-11-09 09:25:47 +00:00
etc/tinydm.d/env-wayland.d/50-sdl-wayland.sh
main/postmarketos-base: add Firefox env config to -tinydm subpackage (MR 2235) Currently, this only sets Firefox to run in Wayland mode, but in the future it might be used to make e.g. SDL applications run in Wayland mode. SDL applications are not set to run in Wayland mode right no as SDL 1.2 uses the same environment variable as SDL 2.0 for controlling video driver (SDL_VIDEODRIVER) and SDL 1.2 does not support Wayland and crashes if an invalid value is provided for SDL_VIDEODRIVER, and as such setting SDL_VIDEODRIVER=wayland globally would break all SDL 1.2 applications. This will however be fixed once SDL 1.2 is replaced by sdl12-compat in Alpine, as sdl12-compat implements the SDL 1.2 API and ABI via SDL 2.0 and as such supports Wayland. As such, once this happens we can start setting SDL_VIDEODRIVER=wayland. [ci:skip-build] already built successfully in CI
2021-06-27 19:41:19 +00:00
"
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
# Avoid filename based checksum conflicts by including the whole path.
flatpath() {
local i
for i in $@; do
echo "rootfs-$i" | sed s./.-.g
done
}
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
source="$(flatpath $_source644 $_source600 $_source755)"
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
package() {
local i
for i in $_source644; do
install -Dm644 "$srcdir/$(flatpath "$i")" "$pkgdir/$i"
done
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
for i in $_source600; do
install -Dm600 "$srcdir/$(flatpath "$i")" "$pkgdir/$i"
done
main/postmarketos-base: add Firefox env config to -tinydm subpackage (MR 2235) Currently, this only sets Firefox to run in Wayland mode, but in the future it might be used to make e.g. SDL applications run in Wayland mode. SDL applications are not set to run in Wayland mode right no as SDL 1.2 uses the same environment variable as SDL 2.0 for controlling video driver (SDL_VIDEODRIVER) and SDL 1.2 does not support Wayland and crashes if an invalid value is provided for SDL_VIDEODRIVER, and as such setting SDL_VIDEODRIVER=wayland globally would break all SDL 1.2 applications. This will however be fixed once SDL 1.2 is replaced by sdl12-compat in Alpine, as sdl12-compat implements the SDL 1.2 API and ABI via SDL 2.0 and as such supports Wayland. As such, once this happens we can start setting SDL_VIDEODRIVER=wayland. [ci:skip-build] already built successfully in CI
2021-06-27 19:41:19 +00:00
for i in $_source755; do
install -Dm755 "$srcdir/$(flatpath "$i")" "$pkgdir/$i"
done
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
}
x11() {
install_if="$pkgname=$pkgver-r$pkgrel xorg-server"
depends="
libinput
xf86-input-libinput
xf86-video-fbdev"
provides="postmarketos-base-x11=$pkgver-r$pkgrel"
main/postmarketos-base-ui: add Xwrapper script for X11 (MR 2773) Xorg needs an Xwrapper.config script with the line 'needs_root_rights=yes' to get tinydm + sxmo to work
2021-12-19 15:32:36 +00:00
amove etc/X11/Xwrapper.config
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
}
elogind() {
install_if="$pkgname=$pkgver-r$pkgrel elogind"
depends="sleep-inhibitor"
install="$subpkgname.pre-upgrade $subpkgname.post-install"
replaces="
elogind
sleep-inhibitor
"
provides="postmarketos-base-elogind=$pkgver-r$pkgrel"
amove etc/elogind/logind.conf
amove etc/sleep-inhibitor.conf
}
main/postmarketos-base-ui: configure openrc-settingsd for chronyd (MR 3953) We need to tell openrc-settingsd which ntp service to use, otherwise it'll default to busybox ntpd which we don't want. Additionally make sure openrc-settingsd service gets launched at boot with the post-install/post-upgrade script. [ci:skip-build]: already built successfully in CI
2023-03-14 19:49:31 +00:00
_openrc_settingsd() {
install_if="$pkgname=$pkgver-r$pkgrel openrc-settingsd-openrc"
install="$subpkgname.post-install $subpkgname.post-upgrade"
replaces="openrc-settingsd-openrc"
amove etc/conf.d/openrc-settingsd
}
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
tinydm() {
install_if="$pkgname=$pkgver-r$pkgrel tinydm-openrc"
replaces="tinydm-openrc"
provides="postmarketos-base-tinydm=$pkgver-r$pkgrel"
amove etc/conf.d/tinydm
main/postmarketos-base: add Firefox env config to -tinydm subpackage (MR 2235) Currently, this only sets Firefox to run in Wayland mode, but in the future it might be used to make e.g. SDL applications run in Wayland mode. SDL applications are not set to run in Wayland mode right no as SDL 1.2 uses the same environment variable as SDL 2.0 for controlling video driver (SDL_VIDEODRIVER) and SDL 1.2 does not support Wayland and crashes if an invalid value is provided for SDL_VIDEODRIVER, and as such setting SDL_VIDEODRIVER=wayland globally would break all SDL 1.2 applications. This will however be fixed once SDL 1.2 is replaced by sdl12-compat in Alpine, as sdl12-compat implements the SDL 1.2 API and ABI via SDL 2.0 and as such supports Wayland. As such, once this happens we can start setting SDL_VIDEODRIVER=wayland. [ci:skip-build] already built successfully in CI
2021-06-27 19:41:19 +00:00
amove etc/tinydm.d/env-wayland.d/50-firefox-wayland.sh
main/postmarketos-base-ui: run SDL in Wayland mode by default (MR 2669) This is possible now that all SDL (1) applications use sdl12-compat instead of "classic" SDL 1.2. Note that this only is applied to user interfaces that use Wayland and are launched through tinydm. See https://gitlab.alpinelinux.org/alpine/aports/-/issues/12739
2021-11-09 09:25:47 +00:00
amove etc/tinydm.d/env-wayland.d/50-sdl-wayland.sh
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
}
pulseaudio() {
install_if="$pkgname=$pkgver-r$pkgrel pulseaudio"
main/postmarketos-base-ui-pulseaudio: depend on pulseaudio-utils (MR 3411) start-pulseaudio-x11 uses pactl, which is not installed by default.
2022-09-08 08:44:59 +00:00
depends="pulseaudio-utils"
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
provides="postmarketos-base-pulseaudio=$pkgver-r$pkgrel"
main/postmarketos-base-ui: simplify pulseaudio config (MR 3412) config scripts in /etc/pulse/default.pa.d are loaded automatically by default.pa
2022-09-08 00:05:26 +00:00
amove etc/pulse/default.pa.d/postmarketos.pa
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
}
postmarketos-base-ui: install obexd and obex-capabilities (MR 2245) Install obex-capabilities and a modified DBus Service for BlueZ's obexd when BlueZ OBEX support is installed. UIs depending on BlueZ are now also depending on bluez-obexd for OBEX support through various MRs at Alpine.
2021-06-11 19:00:21 +00:00
_obexd() {
install_if="$pkgname=$pkgver-r$pkgrel bluez-obexd"
replaces="bluez-obexd"
depends="obex-capabilities"
mkdir -p "$subpkgdir"
}
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
networkmanager() {
main/postmarketos-base-ui: networkmanager: depends on networkmanager{,-*} (MR 3749) [ci:ignore-count] [ci:skip-build]: already built successfully in CI
2022-12-31 15:53:45 +00:00
depends="
pmos-base-ui-networkmanager: set up dnsmasq for filtering lookups (MR 3823) This uses a dispatcher script to configure filtering A and AAAA records based on which IP versions are routable on the NM primary connection. gojq is preferred over the 'standard' jq because it's considerably faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s with gojq. the difference is probably greater on slower phones... so it seemed worth installing it. fixes #1430 Co-authored-by: Arnavion <me@arnavion.dev>
2023-01-25 08:14:08 +00:00
busctl
dnsmasq-dnssec-dbus>=2.89-r2
gojq
main/postmarketos-base-ui: networkmanager: depends on networkmanager{,-*} (MR 3749) [ci:ignore-count] [ci:skip-build]: already built successfully in CI
2022-12-31 15:53:45 +00:00
networkmanager
networkmanager-cli
networkmanager-openrc
networkmanager-tui
networkmanager-wifi
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
networkmanager-wwan
networkmanager-dnsmasq"
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
amove etc/NetworkManager/conf.d/hostname-mode.conf
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
amove etc/NetworkManager/dispatcher.d/85-tethering
amove usr/lib/NetworkManager/system-connections/USB_Networking.nmconnection
pmos-base-ui-networkmanager: set up dnsmasq for filtering lookups (MR 3823) This uses a dispatcher script to configure filtering A and AAAA records based on which IP versions are routable on the NM primary connection. gojq is preferred over the 'standard' jq because it's considerably faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s with gojq. the difference is probably greater on slower phones... so it seemed worth installing it. fixes #1430 Co-authored-by: Arnavion <me@arnavion.dev>
2023-01-25 08:14:08 +00:00
amove etc/NetworkManager/conf.d/use-dnsmasq.conf
amove etc/NetworkManager/dispatcher.d/99-dns-filter.sh
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
}
main/pmos-base-ui: add postmarketos-default-camera dummy package (MR 3815) This is a dummy package that other packages can install_if on to install the appropriate camera app for the device/UI. It's intended to be added to pmb_recommends= for pmos-ui-* packages that want to have a camera by default.
2023-02-01 08:14:38 +00:00
_default_camera() {
# dummy package for camera app, packages can install_if on this to install
# the appropriate camera app for that device/UI
mkdir "$subpkgdir"
}
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
sha512sums="
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
3c9ae7415f4891bee8595166ed6a42cb577a837f741c6b5409d193558626348b41516888a01d0c4895282c5f4e9a1ff838c19712888750b2ef68429bb4b42ee3 rootfs-etc-NetworkManager-conf.d-hostname-mode.conf
pmos-base-ui-networkmanager: set up dnsmasq for filtering lookups (MR 3823) This uses a dispatcher script to configure filtering A and AAAA records based on which IP versions are routable on the NM primary connection. gojq is preferred over the 'standard' jq because it's considerably faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s with gojq. the difference is probably greater on slower phones... so it seemed worth installing it. fixes #1430 Co-authored-by: Arnavion <me@arnavion.dev>
2023-01-25 08:14:08 +00:00
900554534191fa0797064d35350934cdd8af59f30f0ae7d8ec63c2e11c44a16c643d3024b6543940488cd590fec1d392548bcaacc3be88cddff90f69b17ece07 rootfs-etc-NetworkManager-conf.d-use-dnsmasq.conf
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
6507eb31cdd694a7db0280246433118a650bf5d99fbe639f967ae2d95945429a7e03ca6feb5bb6e7b9fb14fcec21e13e51209a79edd0041e77b5bf76b129ed6f rootfs-etc-NetworkManager-conf.d-tethering.conf
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
e5d049db1d82c510bab9246208b51b8ec2711d008d67792fc10d4c0b65ed4dece7b5ae3c3dd28a8539d177b6849c1f921cb9fef3d2c7bee0355451f7b4757ec6 rootfs-etc-chrony-chrony.conf
main/postmarketos-base-ui: configure openrc-settingsd for chronyd (MR 3953) We need to tell openrc-settingsd which ntp service to use, otherwise it'll default to busybox ntpd which we don't want. Additionally make sure openrc-settingsd service gets launched at boot with the post-install/post-upgrade script. [ci:skip-build]: already built successfully in CI
2023-03-14 19:49:31 +00:00
49fb494b659fe0149a93eafe109609acce6a470bb8acea160638d07e0e4b11af2544f34549d5ef2deb2914a7ef13d0d470b04ad62981f14f96999af02a5f24cf rootfs-etc-conf.d-openrc-settingsd
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
44e4283c6f77de83915977dd3bc2d8e2d96b3ed6cc68d3cc156304359ae649b5a8b0bac843e517ec6faa2066dd43ba85e313899b1eda04862f864fb9eb508aa0 rootfs-etc-conf.d-tinydm
fe0651904c1f40ffa67d83daca190af199f63247e53642a59a1e1147cd06776fcf20b7b2fcc5373783d50b8bd6ce8d1354c8e5f4d582d319727b9ceefd1e8e16 rootfs-etc-conf.d-wpa_supplicant
8d2c54fe3ca62c62f8337fb6be28479d0e02ea63f32abae81907f2768631e65c9e17485f8bc0854a013377f729b06dd1873e2b75f86f657ece866d00aecbbdb4 rootfs-etc-elogind-logind.conf
main/postmarketos-base-ui: simplify pulseaudio config (MR 3412) config scripts in /etc/pulse/default.pa.d are loaded automatically by default.pa
2022-09-08 00:05:26 +00:00
6c516635a61fbaa93102f02301a75070a91de837456b07a50e24a9e0ee5dac785087d4a8f78906807719ebf6f0124127383441cccf00475d9a91d3dbaf9d4d81 rootfs-etc-pulse-default.pa.d-postmarketos.pa
main/postmarketos-base-ui: add "$HOME/.local/bin" to $PATH (MR 2445) This directory is specified by the XDG Base Directory specification (https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html). Quoting: > User-specific executable files may be stored in $HOME/.local/bin. > Distributions should ensure this directory shows up in the UNIX $PATH environment variable, at an appropriate place. So let's actually do this. This way also binaries installed by e.g. Pip or Cargo will be usable out-of-the-box rather than that the user has to figure out why it's not appearing in their PATH.
2021-08-17 11:26:14 +00:00
90b30cbea660ef6cd4c0461b6935de0cd63a84a1a40edb24348a83044c97935b974bd8bafda9cd558e92d3eb69e22c5ccf55483b80f839e24f0eb57ae2df6fe3 rootfs-etc-skel-.profile
main/postmarketos-base-ui: NetworkManager: hostname-mode=none (MR 2457) Disable the hostname management feature of NetworkManager. This isn't useful for the postmarketOS use case, where we set one hostname in /etc/hostname via pmbootstrap and want it to be used. (It makes more sense for normal PCs, which may just have the hostname 'localhost' at the end of the installation and then not be unique in the network.) NetworkManager is supposed to only change the hostname if it is set to localhost, however this detection does not work properly in postmarketOS. I've skimmed through sources of elogind, NetworkManager and OpenRC a bit and found that in OpenRC the definitive location to put the hostname is /etc/hostname. The other path, /etc/conf.d/hostname, is just a fallback. Experiments show that setting something in /etc/conf.d/hostname does prevent NM from setting a hostname offered by the DHCP server, but it's not clear to my why this happens. I suspect elogind + dbus. Disabling this feature we don't need anyway seems like a good approach to me without wasting too much time here.
2021-08-22 13:48:31 +00:00
6b9c7bb73213187eb9ca8a94109b2b816f50c1158c90fec2e92b373864280d67741589e5bfbab8810945f031d2f4b535aad78a72e46e52ea50be5b85324da381 rootfs-etc-sleep-inhibitor.conf
main/postmarketos-base-ui: add Xwrapper script for X11 (MR 2773) Xorg needs an Xwrapper.config script with the line 'needs_root_rights=yes' to get tinydm + sxmo to work
2021-12-19 15:32:36 +00:00
cac604e25c46e695dd30bd5a10cfd2d69595fcc3bc290096ac94b76b10834d591ea6576afb79c46b5da492a1dbf8660cf87b6110cd39937e15237bc74fa7a5c6 rootfs-etc-X11-Xwrapper.config
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
1b8add60574ec4644197cb93263c0653325c2e88e03673de918be5fb3280c7b81e8e97dce498850a07f2f3307771c44f3c876922e5cbd5207523ede31816296f rootfs-usr-lib-NetworkManager-system-connections-USB_Networking.nmconnection
pmos-base-ui-networkmanager: set up dnsmasq for filtering lookups (MR 3823) This uses a dispatcher script to configure filtering A and AAAA records based on which IP versions are routable on the NM primary connection. gojq is preferred over the 'standard' jq because it's considerably faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s with gojq. the difference is probably greater on slower phones... so it seemed worth installing it. fixes #1430 Co-authored-by: Arnavion <me@arnavion.dev>
2023-01-25 08:14:08 +00:00
52d58729cbf3cd0318de633e8a8da74c7af246025a8c5746d5e7c854bdabbf27fa07d8558ffec92a30491cdb687fe4414de5adcddd7da5be3510f918fba463a2 rootfs-etc-NetworkManager-dispatcher.d-99-dns-filter.sh
main/postmarketos-base-ui: enable USB tethering (MR 3819) USB tethering allows users to use their phone's WiFi or WWAN interface as an access point for the device they connect the phone with over USB. This way, they can use their data plan with a laptop or desktop when regular Internet access is absent. Configure NetworkManager to manage the usb0 iface from initfs so users can configure it in GNOME Settings or KDE. Include a NetworkManager dispatcher script as well to handle postmarketOS' setup with unudhcpd as we want to provide an SSH login over USB when tethering is disabled. If tethering is enabled, unudhpcd is stopped and its functionality is taken over by NetworkManager through an instance of dnsmasq. NetworkManager will also configure the necessary settings to allow IP forwarding and firewall rules during tethering. Once disabled, NetworkManager cleans up these settings and our dispatcher script starts unudhcpd again. Due to upstream changes, NetworkManager requires networkmanager-dnsmasq subpackage as dependency as dnsmasq needs DBus support for NetworkManager. Without it, NetworkManager will silently fail spawning dnsmasq instances. [ci:skip-build]: already built successfully in CI
2023-01-22 17:55:54 +00:00
b344a64619aac5295342c597087ecf0614d4dfa0f7afd51f71dd2e9abc473ab9d08b22b3c075729e2f5e69f4e0e601ed3a9b76886c805650e02d6cc4643a7280 rootfs-etc-NetworkManager-dispatcher.d-85-tethering
main/postmarketos-base: add Firefox env config to -tinydm subpackage (MR 2235) Currently, this only sets Firefox to run in Wayland mode, but in the future it might be used to make e.g. SDL applications run in Wayland mode. SDL applications are not set to run in Wayland mode right no as SDL 1.2 uses the same environment variable as SDL 2.0 for controlling video driver (SDL_VIDEODRIVER) and SDL 1.2 does not support Wayland and crashes if an invalid value is provided for SDL_VIDEODRIVER, and as such setting SDL_VIDEODRIVER=wayland globally would break all SDL 1.2 applications. This will however be fixed once SDL 1.2 is replaced by sdl12-compat in Alpine, as sdl12-compat implements the SDL 1.2 API and ABI via SDL 2.0 and as such supports Wayland. As such, once this happens we can start setting SDL_VIDEODRIVER=wayland. [ci:skip-build] already built successfully in CI
2021-06-27 19:41:19 +00:00
d1ddd43489e6016e3ffd716027ed2bae4a2ab5f213118bdbcb96750e267ab7c0367cd0e0e386300aa5550352653144f5caeddd790621fe0879f83ca1995bb65c rootfs-etc-tinydm.d-env-wayland.d-50-firefox-wayland.sh
main/postmarketos-base-ui: run SDL in Wayland mode by default (MR 2669) This is possible now that all SDL (1) applications use sdl12-compat instead of "classic" SDL 1.2. Note that this only is applied to user interfaces that use Wayland and are launched through tinydm. See https://gitlab.alpinelinux.org/alpine/aports/-/issues/12739
2021-11-09 09:25:47 +00:00
ecaa57d033a119a53a6574c27636b7c89d659d75ea48a973a6a4ff6f90e5d07202529fd489bfc9dfc7430f5b60f40612f6d5c06f7fab47e681b0a3112a874058 rootfs-etc-tinydm.d-env-wayland.d-50-sdl-wayland.sh
postmarketos-base-ui: new aport (MR 2243) This provides UI-specific config and dependencies for postmarketos-ui-* packages. fixes #1104
2021-06-09 23:32:56 +00:00
"
Reference in a new issue Copy permalink