forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/device-xiaomi-armani/APKBUILD

49 lines
2.3 KiB
Text
Raw Normal View History

Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
# Reference: <https://postmarketos.org/devicepkg>
pkgname="device-xiaomi-armani"
pkgdesc="Redmi 1S"
pkgver=0.1
Add deviceinfo_codename variable (!114) For postmarketOS/pmaports#157 [skip ci]
2018-12-25 19:25:32 +00:00
pkgrel=7
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
url="https://postmarketos.org"
license="MIT"
device-*: don't use noarch anymore Use the device's architecture instead of noarch. Because the device packages should never be built for other architectures, even if all depends can be built for other arches as well. This simplifies package building as part of the new build infrastructure effort. pmbootstrap has also been changed to output this by default in aportgen.
2018-11-07 06:45:58 +00:00
arch="armhf"
options="!check !archcheck"
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
depends="postmarketos-base linux-xiaomi-armani mkbootimg mesa-dri-swrast msm-fb-refresher"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
makedepends="devicepkg-dev"
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
install="$pkgname.post-install $pkgname.pre-deinstall $pkgname.post-upgrade"
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
source="deviceinfo
90-touchscreen.rules
100-charging.rules
armani_battery_charging.sh
armani_battery_discharging.sh
wlanarmani
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
fb.modes"
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
install -Dm644 "$srcdir"/90-touchscreen.rules "$pkgdir"/etc/udev/rules.d/90-touchscreen.rules
install -Dm644 "$srcdir"/100-charging.rules "$pkgdir"/etc/udev/rules.d/100-charging.rules
install -Dm744 "$srcdir"/armani_battery_charging.sh "$pkgdir"/usr/bin/armani_battery_charging.sh
install -Dm744 "$srcdir"/armani_battery_discharging.sh "$pkgdir"/usr/bin/armani_battery_discharging.sh
install -Dm755 "$srcdir"/wlanarmani "$pkgdir"/etc/init.d/wlanarmani
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
install -Dm755 "$srcdir"/fb.modes "$pkgdir"/etc/fb.modes
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
}
Make nonfree depends optional part 2: device pkgs (#1268) * Add nonfree_firmware subpackage to all devices, that depend on nonfree firmware. * Some packages were depending on `linux-firmware`, but without having Wifi working. Removed that dependency as it was probably added by accident. If it was really necessary, chosing the appropriate split linux-firmware package (e.g. linux-firmware-brcm) is better anyway (that has been changed recently in Alpine and is possible now). * Add a test case that makes sure we don't have firmware depends without subpackages in device aports anymore.
2018-02-26 22:11:44 +00:00
nonfree_firmware() {
pkgdesc="Wifi firmware"
depends="firmware-xiaomi-armani"
mkdir "$subpkgdir"
}
Add deviceinfo_codename variable (!114) For postmarketOS/pmaports#157 [skip ci]
2018-12-25 19:25:32 +00:00
sha512sums="962a5b4a206508dcdb7d282f4162e7b99f3a1f850f38eb8c52ce13fc5e77e96601bc1254399fa95b30bbb3b369c17ed1271b6736a3ac195258ae30b0624adbe2 deviceinfo
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
abf694ebe949025268630457ad14ae69f6a33c151236c1a193da32c27f836591e932517f011f6eb7ce750ab74d2f1e9a70724fed7150210d4da1b80a6e86a801 90-touchscreen.rules
862f9a8d81af74c0a1c99c6255d4ec9d4bdd7828636ee29fbaf4b3ceef53f236fd2b2078e3150baf0f1d78a3da87d7b3a5b975fef33014238eb7658428642571 100-charging.rules
cf82b3bf37c4975668d7bb6f0e573fa5b44ed596d80a7ac2cdfa78dd619b7dc58c085fe1a0703953a143a46a4d917abf94f658e268578fe1c40664fa639959d3 armani_battery_charging.sh
c2ae3887712a209a8c8dc60ee87ff1ec8944246cc1a69d1f6f9f2725434e05b6c8388c0b3756423d5cec6a6e0ffc7272c30ccc20b77f0dac0813bb25476d4997 armani_battery_discharging.sh
22339e8b1c854e740034fe305d8447a88f7be98f8f2ef86b7e9ea6e373a30643993d95865c820df6c3598605d3390eb93a859c7a423f04de54a3b06a69adcb55 wlanarmani
xiaomi-armani: load wlan module on default runlevel Previous post install action results in loading wlan module during sysinit. This is not possible since wlan device is only exposed after wcnss-wlan service. This also delays ssh startup for approximately 3 minutes. Loading wlan module should only be done on default runlevel, after wcnss-wlan service has been started. Also add a reference fb.modes file, although directfb applications still doesn't work and cause the framebuffer driver to crash.
2018-03-29 04:00:01 +00:00
cf2b75e766f6ed5b7372179dfe160ecf1fa24a1c4f054abacc98e69794db90ca2c7f686325f7ce806b102c8eb93a345da3c016b17f280eda47f5891322162362 fb.modes"
Reference in a new issue Copy permalink