pmaports/device/community/device-nokia-n900/uboot-script.cmd

setenv mmcnum 0
setenv mmcpart 1
setenv mmctype ext2
setenv setup_omap_atag 1
setenv bootargs init=/init.sh rw console=tty0 console=ttyS2 PMOS_NO_OUTPUT_REDIRECT PMOS_FORCE_PARTITION_RESIZE
setenv mmckernfile /uImage
setenv mmcinitrdfile /uInitrd
setenv mmcscriptfile
echo Loading initramfs
run initrdload
echo Loading kernel
run kernload
echo Booting kernel
run kerninitrdboot
Added uboot script to n900 2017-06-09 23:38:46 +00:00			`setenv mmcnum 0`
			`setenv mmcpart 1`
			`setenv mmctype ext2`
			`setenv setup_omap_atag 1`
nokia-n900: use updated serial console name (MR 3662) Since 00648d0282dcca1da453c0b20d27e24bf901a854, the correct serial console name is ttySx instead of the older ttyOx. Reflect this in cmdline passed to kernel via u-boot [ci:skip-build]: already built successfully in CI 2022-11-23 06:39:50 +00:00			`setenv bootargs init=/init.sh rw console=tty0 console=ttyS2 PMOS_NO_OUTPUT_REDIRECT PMOS_FORCE_PARTITION_RESIZE`
device-nokia-n900: fix u-boot script typo (MR 2708) 2021-11-25 14:39:00 +00:00			`setenv mmckernfile /uImage`
			`setenv mmcinitrdfile /uInitrd`
Added uboot script to n900 2017-06-09 23:38:46 +00:00			`setenv mmcscriptfile`
			`echo Loading initramfs`
			`run initrdload`
			`echo Loading kernel`
			`run kernload`
			`echo Booting kernel`
			`run kerninitrdboot`