forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/linux-xiaomi-armani/APKBUILD

111 lines
4.1 KiB
Text
Raw Normal View History

Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
# Kernel config based on: arch/arm/configs/lineageos_armani_defconfig
pkgname="linux-xiaomi-armani"
pkgver=3.4.0
Revert "linux-*: use upstream gcc6 [skip ci]" This reverts commit ee659a5bb4ad94f33ec47e6ae7bf9e856f627155 and increases the pkgrels of all affected linux pmaports. I have compiled *every single kernel* that was modified with this commit, and it worked. That took 12 hours. So I'm pretty confident that this is a good commit. Let's roll it out and go back to stability \o/ I'll kick off the binary repo building directly after pushing this, but it will take some time until all binary packages are available again. [skip ci]: it wouldn't finish in time.
2018-11-30 20:56:06 +00:00
pkgrel=3
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
pkgdesc="Redmi 1S kernel fork"
arch="armhf"
_carch="arm"
_flavor="xiaomi-armani"
url="https://kernel.org"
license="GPL2"
options="!strip !check !tracedeps"
device/linux-*: make all kernels compile again All kernels compile again, after the GCC 8 upgrade. All 3.x kernels have been changed to use GCC 6 now, because we can't say for sure that they boot with GCC 8 even if we made them compile with that newer GCC. If someone wants to test a kernel for a newer device which they can test, see the instructions on <https://postmarketos.org/vendorkernel>. The linux-sony-castor-windy 4.x kernel did not compile out of the box with the latest GCC, so we set it to GCC 6 as well. This can probably be fixed easily. linux-teclast-x80-pro: removed Werror and updated to latest 4.14 kernel from kernel.org, otherwise this would not compile anymore (tested with both GCC 6 and 8, probably incompatibility with the latest binutils or something). This commit will take too long to compile in CI, so let's [skip ci]. I've compiled all kernels multiple times and fixed them up until all of them were working again. Related: #103
2018-10-01 06:44:18 +00:00
makedepends="perl sed installkernel bash gmp-dev bc linux-headers elfutils-dev dtbtool gcc6"
# Compiler: this kernel was only tested with GCC6. Feel free to make a merge
# request if you find out that it is booting working with newer GCCs as
# well. See <https://postmarketos.org/vendorkernel> for instructions.
if [ "${CC:0:5}" != "gcc6-" ]; then
CC="gcc6-$CC"
Revert "linux-*: use upstream gcc6 [skip ci]" This reverts commit ee659a5bb4ad94f33ec47e6ae7bf9e856f627155 and increases the pkgrels of all affected linux pmaports. I have compiled *every single kernel* that was modified with this commit, and it worked. That took 12 hours. So I'm pretty confident that this is a good commit. Let's roll it out and go back to stability \o/ I'll kick off the binary repo building directly after pushing this, but it will take some time until all binary packages are available again. [skip ci]: it wouldn't finish in time.
2018-11-30 20:56:06 +00:00
HOSTCC="gcc6-gcc"
device/linux-*: make all kernels compile again All kernels compile again, after the GCC 8 upgrade. All 3.x kernels have been changed to use GCC 6 now, because we can't say for sure that they boot with GCC 8 even if we made them compile with that newer GCC. If someone wants to test a kernel for a newer device which they can test, see the instructions on <https://postmarketos.org/vendorkernel>. The linux-sony-castor-windy 4.x kernel did not compile out of the box with the latest GCC, so we set it to GCC 6 as well. This can probably be fixed easily. linux-teclast-x80-pro: removed Werror and updated to latest 4.14 kernel from kernel.org, otherwise this would not compile anymore (tested with both GCC 6 and 8, probably incompatibility with the latest binutils or something). This commit will take too long to compile in CI, so let's [skip ci]. I've compiled all kernels multiple times and fixed them up until all of them were working again. Related: #103
2018-10-01 06:44:18 +00:00
CROSS_COMPILE="gcc6-$CROSS_COMPILE"
fi
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
# Source
_repository="android_kernel_xiaomi_armani"
_commit="0d17d5761449b14f31d00044e95753f3a6ad23b2"
_config="config-${_flavor}.${arch}"
source="
$pkgname-$_commit.tar.gz::https://github.com/LineageOS/${_repository}/archive/${_commit}.tar.gz
$_config
compiler-gcc6.h
00_fix_return_address.patch
01_smd_private.patch
02_gpu-msm-fix-gcc5-compile.patch
03_qdsp6v2.patch
04_mdss_mdp_trace.patch
05_q6voice.patch
"
builddir="$srcdir/${_repository}-${_commit}"
prepare() {
default_prepare
# gcc6 support
cp -v "$srcdir/compiler-gcc6.h" "$builddir/include/linux/"
# Remove -Werror from all makefiles
local i
local makefiles="$(find . -type f -name Makefile)
$(find . -type f -name Kbuild)"
for i in $makefiles; do
sed -i 's/-Werror-/-W/g' "$i"
sed -i 's/-Werror//g' "$i"
done
# Prepare kernel config ('yes ""' for kernels lacking olddefconfig)
cp "$srcdir"/$_config "$builddir"/.config
yes "" | make ARCH="$_carch" HOSTCC="$HOSTCC" oldconfig
}
build() {
unset LDFLAGS
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS"
# Generate master DTB (deviceinfo_bootimg_qcdt)
dtbTool -s 2048 -p "scripts/dtc/" -o "arch/arm/boot/dt.img" "arch/arm/boot/"
}
package() {
# kernel.release
install -D "$builddir/include/config/kernel.release" \
"$pkgdir/usr/share/kernel/$_flavor/kernel.release"
# zImage (find the right one)
cd "$builddir/arch/$_carch/boot"
_target="$pkgdir/boot/vmlinuz-$_flavor"
for _zimg in zImage-dtb Image.gz-dtb *zImage Image; do
[ -e "$_zimg" ] || continue
msg "zImage found: $_zimg"
install -Dm644 "$_zimg" "$_target"
break
done
if ! [ -e "$_target" ]; then
error "Could not find zImage in $PWD!"
return 1
fi
# Master DTB (deviceinfo_bootimg_qcdt)
install -Dm644 "$builddir/arch/arm/boot/dt.img" \
"$pkgdir/boot/dt.img"
# External modules install
cd "$builddir"
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS" \
INSTALL_MOD_PATH="$pkgdir" modules_install \
|| return 1
}
sha512sums="360bf588a670cb7cd67b431c0f7cddb622d0364b3c5a0f0b9b6dd63d8b5dd7d365d6e075a1ce0652d13ce6a9d26cfb85d7b68eeb506d8e8e22aa667f57cdf0b2 linux-xiaomi-armani-0d17d5761449b14f31d00044e95753f3a6ad23b2.tar.gz
linux-xiaomi-armani: disable kgsl 3d driver (#1334) The kgsl 3d driver causes the device to boot loop, so disable this for now. The device boots ok after removing the kgsl driver, although continuing boot from debug-shell via `pmos_continue_boot` does not work (seems to be a bug in msm_fb driver). So, one has to reflash the boot partition generated with no intfs debug shell to enjoy this improvement.
2018-03-14 21:15:06 +00:00
7dccdc9008217dcb6845bac8511627753e9503f069026b83d71f91258dc68a8c66452b590a5255d67cf2b21f9cfed1cee0ac60342c58fdccfde7dc84b52d2e33 config-xiaomi-armani.armhf
Initial porting effort to Xiaomi Redmi 1S (armani) (#1204) The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches are needed for successful compilation. The screen dimension is 720x1280. The touchscreen device name is ft5x06_i2c. Use this name for udev instead of hardcoded device path. Also add a workaround for red screen weston by setting weston_pixman to 2 The screen doesn't refresh. Enabling msm-fb-refresher as suggested. Add udev rule to indicate whether the device is in charging state. Green led indicates that the device is charging, whereas red light indicates that the device is discharging. For prima wlan module to work, an initialization procedure is needed ( echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module (wlan.ko). Also build the prima wlan as module. Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware to run. Add the required wifi firmware to enable the wifi interface. Add an openrc service to load wlan module after wcnss_service is initialized.
2018-02-05 19:58:08 +00:00
d80980e9474c82ba0ef1a6903b434d8bd1b092c40367ba543e72d2c119301c8b2d05265740e4104ca1ac5d15f6c4aa49e8776cb44264a9a28dc551e0d1850dcc compiler-gcc6.h
ea1d3b5a234fa565e3c1a792de48f4fc4e6023d281d303c8e319c7ef28edc5739ab0e4dea0139a41f0a5c7d03e27921ccaa214fd0ac5c72245a094ce60128864 00_fix_return_address.patch
39892cc41e484c51dccc29cadea475aaf99772bafb19231086b614b9eaee520843cd9361c89a6780229961e0ebf4bbf0e115d0e30f8302944b78091fcf7900e7 01_smd_private.patch
7be03a9e78b7ac330a54b1f00509caa0621a95c0c55901878ad757f9dd69cc05ba2c8b5ea987063ae1224f92c4d090d515fa5d369e7755181a4871b0d0f82881 02_gpu-msm-fix-gcc5-compile.patch
1465b7f08dd4d7956c6651da3767648db085f4af8014fd3b24547626ba608734a0c6d8e86ffe086d81817c29f0d8e284e21a3ba50f51cd94ab42935bc124ad30 03_qdsp6v2.patch
8dd3c227af5c379eedecdabe64a481de3e8241431b5d3d3984ffad65ee74706860115eb1b797afe05f6c360f6696bcb7165fa7d634a4a7a147d98f45cbb5246d 04_mdss_mdp_trace.patch
4e7484eaa142e013c9aee12053d91a65983f7629d2b923566d4431143fa0529988dbc28b01dee21336995090ce8127b2ba79208bf61df359632bfeebae9c6618 05_q6voice.patch"
Reference in a new issue Copy permalink