forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-chuwi-hi10plus/APKBUILD

52 lines
1.5 KiB
Text
Raw Normal View History

chuwi-hi10plus: new device (CHUWI Hi10 Plus) (!347) This port uses the Android bootloader (kernelflinger) instead of Gummiboot or rEFInd,... just in case if people still want to easily reflash Android later without going through some DNX Fastboot, Intel Flash Tool blah blah. Chuwi violates GPLv2 by not releasing the kernel sources of Android to the public. This port uses Linux mainline (5.1-rc7), and almost everything works properly, so thankfully we don't have to use the 3.10 kernel which is outdated and EOL. [ci:skip-build]: kernel takes more than an hour to compile on CI. ollieparanoid made sure that everything builds.
2019-05-05 13:10:12 +00:00
# Reference: <https://postmarketos.org/devicepkg>
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours
2020-04-25 09:51:42 +00:00
pkgname=device-chuwi-hi10plus
chuwi-hi10plus: new device (CHUWI Hi10 Plus) (!347) This port uses the Android bootloader (kernelflinger) instead of Gummiboot or rEFInd,... just in case if people still want to easily reflash Android later without going through some DNX Fastboot, Intel Flash Tool blah blah. Chuwi violates GPLv2 by not releasing the kernel sources of Android to the public. This port uses Linux mainline (5.1-rc7), and almost everything works properly, so thankfully we don't have to use the 3.10 kernel which is outdated and EOL. [ci:skip-build]: kernel takes more than an hour to compile on CI. ollieparanoid made sure that everything builds.
2019-05-05 13:10:12 +00:00
pkgdesc="CHUWI Hi10 Plus"
linux-chuwi-hi10plus: upgrade to 5.1.7, optimize config (!416) I've upgraded the kernel to 5.1.7 stable for this tablet, boots and working perfectly fine. I have also added support for initramfs touch screen using mainline silead and as well as optimized the kernel configuration a little bit, it should now compile faster on ollieparanoid's computer (where the official binary packages are currently built). [ci:skip-build]: won't finish in time on CI Signed-off-by: Danct12 <danct12@disroot.org>
2019-06-05 07:56:14 +00:00
pkgver=0.2
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
pkgrel=7
chuwi-hi10plus: new device (CHUWI Hi10 Plus) (!347) This port uses the Android bootloader (kernelflinger) instead of Gummiboot or rEFInd,... just in case if people still want to easily reflash Android later without going through some DNX Fastboot, Intel Flash Tool blah blah. Chuwi violates GPLv2 by not releasing the kernel sources of Android to the public. This port uses Linux mainline (5.1-rc7), and almost everything works properly, so thankfully we don't have to use the 3.10 kernel which is outdated and EOL. [ci:skip-build]: kernel takes more than an hour to compile on CI. ollieparanoid made sure that everything builds.
2019-05-05 13:10:12 +00:00
url="https://postmarketos.org"
license="MIT"
arch="x86_64"
options="!check !archcheck"
main/libsparse: remove (!661) The sparse image tools (img2simg, simg2img, append2simg) are now part of Alpine's android-tools package where they are continously updated. (See https://github.com/nmeum/android-tools/pull/8) Remove "libsparse" as depends from all packages because it is either: - installed automatically by pmbootstrap when needed for deviceinfo_flash_sparse="true" (device-chuwi-hi10plus, device-htc-flounder, device-lg-bullhead, device-semc-anzu, device-xiaomi-kenzo) - seemingly unused(?) (device-asus-z00t, linux-motorola-falcon, linux-motorola-peregrine) [ci:skip-build]: already built successfully in CI
2019-10-05 12:27:11 +00:00
depends="postmarketos-base linux-chuwi-hi10plus mkbootimg mesa-dri-intel libva-intel-driver wireless-regdb pulseaudio pulseaudio-alsa alsa-plugins-pulse"
chuwi-hi10plus: new device (CHUWI Hi10 Plus) (!347) This port uses the Android bootloader (kernelflinger) instead of Gummiboot or rEFInd,... just in case if people still want to easily reflash Android later without going through some DNX Fastboot, Intel Flash Tool blah blah. Chuwi violates GPLv2 by not releasing the kernel sources of Android to the public. This port uses Linux mainline (5.1-rc7), and almost everything works properly, so thankfully we don't have to use the 3.10 kernel which is outdated and EOL. [ci:skip-build]: kernel takes more than an hour to compile on CI. ollieparanoid made sure that everything builds.
2019-05-05 13:10:12 +00:00
makedepends="devicepkg-dev"
subpackages="
$pkgname-nonfree-firmware:nonfree_firmware
$pkgname-x11
$pkgname-weston
"
source="deviceinfo
initfs-hook.sh
weston.ini"
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
}
x11() {
install_if="$pkgname xorg-server"
depends="xf86-video-intel gstreamer-vaapi"
mkdir "$subpkgdir"
}
weston() {
install_if="$pkgname weston"
install -Dm644 "$srcdir"/weston.ini \
"$subpkgdir"/etc/xdg/weston/weston.ini
}
nonfree_firmware() {
pkgdesc="Touch, Wi-Fi, Bluetooth, Sound Firmware"
depends="firmware-chuwi-hi10plus linux-firmware-intel linux-firmware-rtlwifi linux-firmware-rtl_bt"
mkdir "$subpkgdir"
}
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
sha512sums="
35391a40e505cfef57a7bbb45d288b33f7d99df52ae73a4134f78b8c6807af66048f0830bbe4c7656e13890d42436b6b8d89604a08545a967e35f26d82bba892 deviceinfo
chuwi-hi10plus: new device (CHUWI Hi10 Plus) (!347) This port uses the Android bootloader (kernelflinger) instead of Gummiboot or rEFInd,... just in case if people still want to easily reflash Android later without going through some DNX Fastboot, Intel Flash Tool blah blah. Chuwi violates GPLv2 by not releasing the kernel sources of Android to the public. This port uses Linux mainline (5.1-rc7), and almost everything works properly, so thankfully we don't have to use the 3.10 kernel which is outdated and EOL. [ci:skip-build]: kernel takes more than an hour to compile on CI. ollieparanoid made sure that everything builds.
2019-05-05 13:10:12 +00:00
8191c479588ccd0c44d23a06cee975635ad9353a7469489c3436ca22051410ff5153dccfb38284dd3976fd6bb8ea6979d32224b652ce68b51f4448c2aa8fc9dd initfs-hook.sh
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
15497cf556750d2b91ef81dab7c4071dc5d1d62bab6f98db0b240e74d8b26ebcda5af2f80fe998518c3b53e72e0daa762d063c87dff46d73d70a8d879cb9aaa8 weston.ini
"
Reference in a new issue Copy permalink