pmaports/main/linux-postmarketos-allwinner/0015-add-kb151-support.patch

From d1d849cae12db71aa81ceedaedc1b17a34790367 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 19 Jun 2021 18:36:05 -0500
Subject: [PATCH] Input: kb151 - Add a driver for the KB151 keyboard

This keyboard is found in the official Pine64 PinePhone keyboard case.
It is connected over I2C and runs a libre firmware.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   |  64 +++++
 drivers/input/keyboard/Kconfig                |  10 +
 drivers/input/keyboard/Makefile               |   1 +
 drivers/input/keyboard/kb151.c                | 246 ++++++++++++++++++
 4 files changed, 321 insertions(+)
 create mode 100644 drivers/input/keyboard/kb151.c

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 4ede9fe66020c9..0bdc6eceec6099 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -551,6 +551,70 @@
 /* Connected to pogo pins (external spring based pinheader for user addons) */
 &i2c2 {
 	status = "okay";
+
+	keyboard@15 {
+		compatible = "pine64,kb151";
+		reg = <0x15>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+		keypad,num-rows = <6>;
+		keypad,num-columns = <12>;
+		linux,keymap = <MATRIX_KEY(0,  0, KEY_ESC)
+				MATRIX_KEY(0,  1, KEY_1)
+				MATRIX_KEY(0,  2, KEY_2)
+				MATRIX_KEY(0,  3, KEY_3)
+				MATRIX_KEY(0,  4, KEY_4)
+				MATRIX_KEY(0,  5, KEY_5)
+				MATRIX_KEY(0,  6, KEY_6)
+				MATRIX_KEY(0,  7, KEY_7)
+				MATRIX_KEY(0,  8, KEY_8)
+				MATRIX_KEY(0,  9, KEY_9)
+				MATRIX_KEY(0, 10, KEY_0)
+				MATRIX_KEY(0, 11, KEY_BACKSPACE)
+				MATRIX_KEY(1,  0, KEY_TAB)
+				MATRIX_KEY(1,  1, KEY_Q)
+				MATRIX_KEY(1,  2, KEY_W)
+				MATRIX_KEY(1,  3, KEY_E)
+				MATRIX_KEY(1,  4, KEY_R)
+				MATRIX_KEY(1,  5, KEY_T)
+				MATRIX_KEY(1,  6, KEY_Y)
+				MATRIX_KEY(1,  7, KEY_U)
+				MATRIX_KEY(1,  8, KEY_I)
+				MATRIX_KEY(1,  9, KEY_O)
+				MATRIX_KEY(1, 10, KEY_P)
+				MATRIX_KEY(1, 11, KEY_ENTER)
+				MATRIX_KEY(2,  0, KEY_LEFTMETA)
+				MATRIX_KEY(2,  1, KEY_A)
+				MATRIX_KEY(2,  2, KEY_S)
+				MATRIX_KEY(2,  3, KEY_D)
+				MATRIX_KEY(2,  4, KEY_F)
+				MATRIX_KEY(2,  5, KEY_G)
+				MATRIX_KEY(2,  6, KEY_H)
+				MATRIX_KEY(2,  7, KEY_J)
+				MATRIX_KEY(2,  8, KEY_K)
+				MATRIX_KEY(2,  9, KEY_L)
+				MATRIX_KEY(2, 10, KEY_SEMICOLON)
+				MATRIX_KEY(3,  0, KEY_LEFTSHIFT)
+				MATRIX_KEY(3,  1, KEY_Z)
+				MATRIX_KEY(3,  2, KEY_X)
+				MATRIX_KEY(3,  3, KEY_C)
+				MATRIX_KEY(3,  4, KEY_V)
+				MATRIX_KEY(3,  5, KEY_B)
+				MATRIX_KEY(3,  6, KEY_N)
+				MATRIX_KEY(3,  7, KEY_M)
+				MATRIX_KEY(3,  8, KEY_COMMA)
+				MATRIX_KEY(3,  9, KEY_DOT)
+				MATRIX_KEY(3, 10, KEY_SLASH)
+				MATRIX_KEY(4,  1, KEY_LEFTCTRL)
+				MATRIX_KEY(4,  4, KEY_SPACE)
+				MATRIX_KEY(4,  6, KEY_APOSTROPHE)
+				MATRIX_KEY(4,  8, KEY_RIGHTBRACE)
+				MATRIX_KEY(4,  9, KEY_LEFTBRACE)
+				MATRIX_KEY(5,  2, KEY_FN)
+				MATRIX_KEY(5,  3, KEY_LEFTALT)
+				MATRIX_KEY(5,  5, KEY_RIGHTALT)>;
+		wakeup-source;
+	};
 };
 
 &i2s2 {
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 40a070a2e7f5b7..0259e9133f4692 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -353,6 +353,16 @@ config KEYBOARD_HP7XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called jornada720_kbd.
 
+config KEYBOARD_KB151
+	tristate "Pine64 KB151 Keyboard"
+	depends on I2C
+	select CRC8
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here to enable support for the KB151 keyboard used in the
+	  Pine64 PinePhone keyboard case. This driver supports the FLOSS
+	  firmware available at https://megous.com/git/pinephone-keyboard/
+
 config KEYBOARD_LM8323
 	tristate "LM8323 keypad chip"
 	depends on I2C
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 1d689fdd5c00f9..87fda7b961913a 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_IMX_SC_KEY)	+= imx_sc_key.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
+obj-$(CONFIG_KEYBOARD_KB151)		+= kb151.o
 obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
 obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
 obj-$(CONFIG_KEYBOARD_LM8333)		+= lm8333.o
diff --git a/drivers/input/keyboard/kb151.c b/drivers/input/keyboard/kb151.c
new file mode 100644
index 00000000000000..595275d4f9d96f
--- /dev/null
+++ b/drivers/input/keyboard/kb151.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (C) 2021 Samuel Holland <samuel@sholland.org>
+
+#include <linux/crc8.h>
+#include <linux/i2c.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_wakeirq.h>
+
+#define KB151_CRC8_POLYNOMIAL		0x07
+
+#define KB151_DEVICE_ID_HI		0x00
+#define KB151_DEVICE_ID_HI_VALUE		0x4b
+#define KB151_DEVICE_ID_LO		0x01
+#define KB151_DEVICE_ID_LO_VALUE		0x42
+#define KB151_FW_REVISION		0x02
+#define KB151_FW_FEATURES		0x03
+#define KB151_MATRIX_SIZE		0x06
+#define KB151_SCAN_CRC			0x07
+#define KB151_SCAN_DATA			0x08
+#define KB151_SYS_CONFIG		0x20
+#define KB151_SYS_CONFIG_DISABLE_SCAN		BIT(0)
+
+struct kb151 {
+	struct input_dev *input;
+	u8 crc_table[CRC8_TABLE_SIZE];
+	u8 row_shift;
+	u8 rows;
+	u8 cols;
+	u8 buf_swap;
+	u8 buf[];
+};
+
+static void kb151_update(struct i2c_client *client)
+{
+	struct kb151 *kb151 = i2c_get_clientdata(client);
+	unsigned short *keymap = kb151->input->keycode;
+	struct device *dev = &client->dev;
+	size_t buf_len = kb151->cols + 1;
+	u8 *old_buf = kb151->buf;
+	u8 *new_buf = kb151->buf;
+	int col, crc, ret, row;
+
+	if (kb151->buf_swap)
+		old_buf += buf_len;
+	else
+		new_buf += buf_len;
+
+	ret = i2c_smbus_read_i2c_block_data(client, KB151_SCAN_CRC,
+					    buf_len, new_buf);
+	if (ret != buf_len) {
+		dev_err(dev, "Failed to read scan data: %d\n", ret);
+		return;
+	}
+
+	dev_info(dev, "%02x | %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+		new_buf[0], new_buf[1], new_buf[2], new_buf[3], new_buf[4], new_buf[5],
+		new_buf[6], new_buf[7], new_buf[8], new_buf[9], new_buf[10], new_buf[11],
+		new_buf[12]);
+	crc = crc8(kb151->crc_table, new_buf + 1, kb151->cols, CRC8_INIT_VALUE);
+	if (crc != new_buf[0]) {
+		dev_err(dev, "Bad scan data (%02x != %02x)\n",
+			crc, new_buf[0]);
+		return;
+	}
+	dev_info(dev, "Good scan data (%02x == %02x)\n",
+		crc, new_buf[0]);
+
+	for (col = 0; col < kb151->cols; ++col) {
+		u8 old = *(++old_buf);
+		u8 new = *(++new_buf);
+		u8 changed = old ^ new;
+
+		for (row = 0; row < kb151->rows; ++row) {
+			int code = MATRIX_SCAN_CODE(row, col, kb151->row_shift);
+			u8 pressed = new & BIT(row);
+
+			if (!(changed & BIT(row)))
+				continue;
+
+			dev_dbg(&client->dev, "row %u col %u %sed\n",
+				row, col, pressed ? "press" : "releas");
+			input_report_key(kb151->input, keymap[code], pressed);
+		}
+	}
+	input_sync(kb151->input);
+
+	kb151->buf_swap = !kb151->buf_swap;
+}
+
+static int kb151_open(struct input_dev *input)
+{
+	struct i2c_client *client = input_get_drvdata(input);
+	struct device *dev = &client->dev;
+	int ret, val;
+
+	ret = i2c_smbus_read_byte_data(client, KB151_SYS_CONFIG);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read config: %d\n", ret);
+		return ret;
+	}
+
+	val = ret & ~KB151_SYS_CONFIG_DISABLE_SCAN;
+	ret = i2c_smbus_write_byte_data(client, KB151_SYS_CONFIG, val);
+	if (ret) {
+		dev_err(dev, "Failed to write config: %d\n", ret);
+		return ret;
+	}
+
+	kb151_update(client);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void kb151_close(struct input_dev *input)
+{
+	struct i2c_client *client = input_get_drvdata(input);
+	struct device *dev = &client->dev;
+	int ret, val;
+
+	disable_irq(client->irq);
+
+	ret = i2c_smbus_read_byte_data(client, KB151_SYS_CONFIG);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read config: %d\n", ret);
+		return;
+	}
+
+	val = ret | KB151_SYS_CONFIG_DISABLE_SCAN;
+	ret = i2c_smbus_write_byte_data(client, KB151_SYS_CONFIG, val);
+	if (ret) {
+		dev_err(dev, "Failed to write config: %d\n", ret);
+	}
+}
+
+static irqreturn_t kb151_irq_thread(int irq, void *data)
+{
+	struct i2c_client *client = data;
+
+	kb151_update(client);
+
+	return IRQ_HANDLED;
+}
+
+static int kb151_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	u8 info[KB151_MATRIX_SIZE + 1];
+	unsigned int kb_rows, kb_cols;
+	unsigned int rows, cols;
+	struct kb151 *kb151;
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, 0, sizeof(info), info);
+	if (ret != sizeof(info))
+		return ret;
+
+	if (info[KB151_DEVICE_ID_HI] != KB151_DEVICE_ID_HI_VALUE ||
+	    info[KB151_DEVICE_ID_LO] != KB151_DEVICE_ID_LO_VALUE)
+		return -ENODEV;
+
+	dev_info(dev, "Found KB151 with firmware %d.%d (features=%#x)\n",
+		 info[KB151_FW_REVISION] >> 4,
+		 info[KB151_FW_REVISION] & 0xf,
+		 info[KB151_FW_FEATURES]);
+
+	ret = matrix_keypad_parse_properties(dev, &rows, &cols);
+	if (ret)
+		return ret;
+
+	kb_rows = info[KB151_MATRIX_SIZE] & 0xf;
+	kb_cols = info[KB151_MATRIX_SIZE] >> 4;
+	if (rows > kb_rows || cols != kb_cols) {
+		dev_err(dev, "Keyboard matrix is %ux%u, but key map is %ux%u\n",
+			kb_rows, kb_cols, rows, cols);
+		return -EINVAL;
+	}
+
+	/* Allocate two buffers, and include space for the CRC. */
+	kb151 = devm_kzalloc(dev, struct_size(kb151, buf, 2 * (cols + 1)), GFP_KERNEL);
+	if (!kb151)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, kb151);
+
+	crc8_populate_msb(kb151->crc_table, KB151_CRC8_POLYNOMIAL);
+
+	kb151->row_shift = get_count_order(cols);
+	kb151->rows = rows;
+	kb151->cols = cols;
+
+	kb151->input = devm_input_allocate_device(dev);
+	if (!kb151->input)
+		return -ENOMEM;
+
+	input_set_drvdata(kb151->input, client);
+
+	kb151->input->name = client->name;
+	kb151->input->phys = "kb151/input0";
+	kb151->input->id.bustype = BUS_I2C;
+	kb151->input->open = kb151_open;
+	kb151->input->close = kb151_close;
+
+	__set_bit(EV_REP, kb151->input->evbit);
+
+	ret = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
+					 NULL, kb151->input);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to build keymap\n");
+
+	ret = devm_request_threaded_irq(dev, client->irq,
+					NULL, kb151_irq_thread,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					client->name, client);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to request IRQ\n");
+
+	ret = input_register_device(kb151->input);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register input\n");
+
+	return 0;
+}
+
+static const struct of_device_id kb151_of_match[] = {
+	{ .compatible = "pine64,kb151" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, kb151_of_match);
+
+static struct i2c_driver kb151_driver = {
+	.probe_new	= kb151_probe,
+	.driver		= {
+		.name		= "kb151",
+		.of_match_table = kb151_of_match,
+	},
+};
+module_i2c_driver(kb151_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Pine64 KB151 keyboard driver");
+MODULE_LICENSE("GPL");