forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/archived/linux-samsung-klte-downstream/config-samsung-klte-downstream.armv7

4703 lines
131 KiB
Text
Raw Normal View History

Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Automatically generated file; DO NOT EDIT.
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# Linux/arm 3.4.113 Kernel Configuration
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_KTIME_SCALAR=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARM_TICKET_LOCKS=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_WANT_KMAP_ATOMIC_FLUSH=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_NEED_MACH_IO_H=y
CONFIG_NEED_MACH_MEMORY_H=y
CONFIG_PHYS_OFFSET=0x00000000
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_ARCH_RANDOM is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_BSD_PROCESS_ACCT is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_FHANDLE=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_MAY_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_RCU_FAST_NO_HZ_OFF_AT_BOOT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_GENERIC_SCHED_CLOCK=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
CONFIG_CGROUP_PERF=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CFS_BANDWIDTH=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_RT_GROUP_SCHED=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_NAMESPACES=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_MM_OWNER=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_RD_LZ4 is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_PANIC_TIMEOUT=5
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_DEFERRED_INITCALLS=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_BLK_DEV_THROTTLING is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_SUPPORT_STLOG=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_TEST=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_ROW=y
CONFIG_IOSCHED_CFQ=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_CFQ_GROUP_IOSCHED is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_IOSCHED_BFQ=y
CONFIG_CGROUP_BFQIO=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_ROW is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_BFQ is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_DEFAULT_NOOP is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_PRIMA2 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PICOXCELL is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
CONFIG_ARCH_MSM=y
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_VT8500 is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
#
# MSM SoC Type
#
# CONFIG_ARCH_MSM7X01A is not set
# CONFIG_ARCH_MSM7X25 is not set
# CONFIG_ARCH_MSM7X27 is not set
# CONFIG_ARCH_MSM7X30 is not set
# CONFIG_ARCH_QSD8X50 is not set
# CONFIG_ARCH_MSM8X60 is not set
# CONFIG_ARCH_MSM8960 is not set
# CONFIG_ARCH_MSM8930 is not set
# CONFIG_ARCH_APQ8064 is not set
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MSM8974PRO=y
# CONFIG_ARCH_APQ8084 is not set
# CONFIG_ARCH_MPQ8092 is not set
# CONFIG_ARCH_FSM9900 is not set
# CONFIG_ARCH_FSM9XXX is not set
# CONFIG_ARCH_MSM9615 is not set
# CONFIG_ARCH_MSM8625 is not set
# CONFIG_ARCH_MSM9625 is not set
# CONFIG_ARCH_MSMKRYPTON is not set
# CONFIG_ARCH_MSM8610 is not set
# CONFIG_ARCH_MSM8226 is not set
# CONFIG_ARCH_MSM8226_3G_WIFI is not set
# CONFIG_ARCH_MSM8926_LTE is not set
# CONFIG_ARCH_MSMSAMARIUM is not set
CONFIG_MSM_SOC_REV_NONE=y
# CONFIG_MSM_SOC_REV_A is not set
CONFIG_MSM_KRAIT_TBB_ABORT_HANDLER=y
CONFIG_ARCH_MSM_KRAIT=y
CONFIG_MSM_SMP=y
CONFIG_ARCH_MSM_KRAITMP=y
CONFIG_MSM_RESTART_V2=y
# CONFIG_MSM_RPM is not set
CONFIG_MSM_RPM_SMD=y
# CONFIG_MSM_MPM is not set
CONFIG_MSM_MPM_OF=y
# CONFIG_MSM_LPM_TEST is not set
# CONFIG_SEC_MILLET_PROJECT is not set
# CONFIG_SEC_DEGAS_PROJECT is not set
# CONFIG_SEC_MATISSE_PROJECT is not set
# CONFIG_SEC_RUBENS_PROJECT is not set
# CONFIG_MACH_VASTALTE_CHN_CMCC_DUOS is not set
# CONFIG_VASTALTE_CHN_CMCC_DUOS_COMMON is not set
# CONFIG_SEC_VASTALTE_CHN_CMMCC_DUOS_PROJECT is not set
# CONFIG_SEC_ATLANTIC_PROJECT is not set
# CONFIG_MACH_HESTIALTE_ATT is not set
# CONFIG_MACH_HESTIALTE_EUR is not set
# CONFIG_SEC_HESTIA_PROJECT is not set
# CONFIG_SEC_AFYON_PROJECT is not set
# CONFIG_SEC_MEGA2_PROJECT is not set
# CONFIG_SEC_AFYONLTE_COMMON is not set
# CONFIG_SEC_MILLETLTE_COMMON is not set
# CONFIG_SEC_DEGASLTE_COMMON is not set
# CONFIG_SEC_RUBENSLTE_COMMON is not set
# CONFIG_SEC_RUBENSWIFI_COMMON is not set
# CONFIG_SEC_MILLETWIFI_COMMON is not set
# CONFIG_SEC_MATISSEWIFI_COMMON is not set
# CONFIG_SEC_BERLUTI_PROJECT is not set
# CONFIG_SEC_S3VE_PROJECT is not set
# CONFIG_SEC_VICTOR3GDSDTV_PROJECT is not set
# CONFIG_SEC_MATISSELTE_COMMON is not set
# CONFIG_SEC_ATLANTICLTE_COMMON is not set
# CONFIG_SEC_HESTIALTE_COMMON is not set
# CONFIG_SEC_ATLANTIC3G_COMMON is not set
# CONFIG_SEC_MEGA23G_COMMON is not set
# CONFIG_SEC_MEGA2LTE_COMMON is not set
# CONFIG_SEC_VICTOR_PROJECT is not set
# CONFIG_SEC_VASTA_PROJECT is not set
# CONFIG_SEC_FRESCONEO_PROJECT is not set
# CONFIG_SEC_GNOTE_PROJECT is not set
# CONFIG_SEC_GNOTELTEDS_COMMON is not set
# CONFIG_MACH_MATISSELTE_OPEN is not set
# CONFIG_DUMP_UART_PACKET_DISABLE is not set
# CONFIG_MACH_MATISSELTE_ATT is not set
# CONFIG_MACH_MATISSELTE_VZW is not set
# CONFIG_MACH_MATISSELTE_USC is not set
# CONFIG_MACH_MILLETWIFI_OPEN is not set
# CONFIG_MACH_MILLETWIFIUS_OPEN is not set
# CONFIG_MACH_MATISSEWIFI_OPEN is not set
# CONFIG_MACH_MATISSEWIFIUS_OPEN is not set
# CONFIG_MACH_MATISSEWIFIUS_GOOGLE is not set
# CONFIG_MACH_MATISSEWIFIUS_AMPLIFY is not set
# CONFIG_MACH_MILLET3G_EUR is not set
# CONFIG_MACH_MILLET3G_CHN_OPEN is not set
# CONFIG_MACH_MILLETLTE_OPEN is not set
# CONFIG_MACH_MILLETLTE_ATT is not set
# CONFIG_MACH_MILLETLTE_CAN is not set
# CONFIG_MACH_MILLETLTE_TMO is not set
# CONFIG_MACH_MILLETLTE_VZW is not set
# CONFIG_MACH_MILLETLTE_KOR is not set
# CONFIG_MACH_RUBENSLTE_OPEN is not set
# CONFIG_MACH_RUBENSWIFI_OPEN is not set
# CONFIG_MACH_DEGASLTE_SPR is not set
# CONFIG_MACH_DEGASLTE_VZW is not set
# CONFIG_MACH_MATISSE3G_OPEN is not set
# CONFIG_MACH_MATISSE3G_CHN_OPEN is not set
# CONFIG_MACH_AFYONLTE_TMO is not set
# CONFIG_MACH_AFYONLTE_MTR is not set
# CONFIG_MACH_AFYONLTE_CAN is not set
# CONFIG_MACH_ATLANTICLTE_VZW is not set
# CONFIG_MACH_ATLANTICLTE_ATT is not set
# CONFIG_MACH_ATLANTICLTE_USC is not set
# CONFIG_MACH_ATLANTIC3GEUR_OPEN is not set
# CONFIG_MACH_BERLUTI3G_EUR is not set
# CONFIG_MACH_BERLUTI3G_COMMON is not set
# CONFIG_MACH_BERLUTILTE_EUR is not set
# CONFIG_MACH_BERLUTILTE_COMMON is not set
# CONFIG_MACH_S3VE3G_EUR is not set
# CONFIG_SEC_MS01_PROJECT is not set
# CONFIG_MACH_VICTOR3GDSDTV_LTN is not set
# CONFIG_MACH_VICTORLTE is not set
# CONFIG_MACH_VASTALTE is not set
# CONFIG_MACH_VICTORLTE_CMCC is not set
# CONFIG_MACH_VICTORLTE_CTC is not set
# CONFIG_MACH_VASTALTE_CTC is not set
# CONFIG_MACH_FRESCONEOLTE_CTC is not set
# CONFIG_MACH_MEGA23GEUR_OPEN is not set
# CONFIG_MACH_MEGA2LTE_KTT is not set
# CONFIG_MACH_GNOTELTEDS_OPEN is not set
# CONFIG_MACH_T10_3G_OPEN is not set
# CONFIG_SEC_T10_PROJECT is not set
# CONFIG_MACH_T8_3G_OPEN is not set
# CONFIG_SEC_T8_PROJECT is not set
# CONFIG_MACH_T10_WIFI_OPEN is not set
# CONFIG_SEC_T10_WIFI_COMMON is not set
#
# MSM Board Selection
#
# CONFIG_SEC_FACTORY is not set
# CONFIG_SEC_S_PROJECT is not set
# CONFIG_MACH_SLTE_ATT is not set
# CONFIG_MACH_SLTE_SPR is not set
# CONFIG_MACH_SLTE_TMO is not set
# CONFIG_MACH_SLTE_USC is not set
# CONFIG_MACH_SLTE_VZW is not set
# CONFIG_MACH_SLTE_CMCC is not set
# CONFIG_MACH_SLTE_CTC is not set
# CONFIG_MACH_SLTE_CU is not set
# CONFIG_MACH_SLTE_TD is not set
# CONFIG_MACH_SLTE_DCM is not set
# CONFIG_MACH_SLTE_KDI is not set
# CONFIG_MACH_SLTE_CAN is not set
CONFIG_SEC_K_PROJECT=y
CONFIG_MACH_KLTE_EUR=y
# CONFIG_MACH_KLTE_ATT is not set
# CONFIG_MACH_KLTE_TMO is not set
# CONFIG_MACH_KLTE_VZW is not set
# CONFIG_MACH_KLTE_SPR is not set
# CONFIG_MACH_KLTE_USC is not set
# CONFIG_MACH_KLTE_ACG is not set
# CONFIG_MACH_KLTE_MTR is not set
# CONFIG_MACH_KLTE_LRA is not set
# CONFIG_MACH_KWIFI_LDU is not set
# CONFIG_MACH_KLTE_KOR is not set
# CONFIG_MACH_KLTE_SKT is not set
# CONFIG_MACH_KLTE_KTT is not set
# CONFIG_MACH_KLTE_LGT is not set
# CONFIG_MACH_KLTE_CHN is not set
# CONFIG_MACH_KLTE_LTNDUOS is not set
# CONFIG_MACH_K3GDUOS_CTC is not set
# CONFIG_MACH_KLTE_CMCC is not set
# CONFIG_MACH_KLTE_CMCCDUOS is not set
# CONFIG_MACH_KLTE_CTC is not set
# CONFIG_MACH_KLTE_AUS_TEL is not set
# CONFIG_MACH_KLTE_CU is not set
# CONFIG_MACH_KLTE_CUDUOS is not set
# CONFIG_MACH_KLTE_JPN is not set
# CONFIG_MACH_KLTE_DCM is not set
# CONFIG_MACH_KLTE_SBM is not set
# CONFIG_MACH_KLTE_KDI is not set
# CONFIG_MACH_KLTE_CAN is not set
# CONFIG_MACH_KLTE_MAX77828_JPN is not set
# CONFIG_MACH_KLTE_JPN_WLAN_OBSOLETE is not set
# CONFIG_SEC_PATEK_PROJECT is not set
# CONFIG_MACH_PATEKLTE_CTC is not set
# CONFIG_SEC_MONDRIAN_PROJECT is not set
# CONFIG_MACH_MONDRIAN is not set
# CONFIG_MACH_MONDRIAN_LTE is not set
# CONFIG_MACH_MONDRIANATT is not set
# CONFIG_MACH_MONDRIAN_WIFI is not set
# CONFIG_MACH_MONDRIANWIFI_USA is not set
# CONFIG_MACH_MONDRIANWIFI_EUR is not set
# CONFIG_MACH_MONDRIAN_3G is not set
# CONFIG_SEC_VIENNA_PROJECT is not set
# CONFIG_MACH_VIENNA is not set
# CONFIG_MACH_VIENNA_LTE is not set
# CONFIG_MACH_VIENNAEUR is not set
# CONFIG_MACH_VIENNAKOR is not set
# CONFIG_MACH_VIENNAVZW is not set
# CONFIG_MACH_VIENNAATT is not set
# CONFIG_SEC_H_PROJECT is not set
CONFIG_USER_RESET_DEBUG=y
# CONFIG_MACH_HLTEATT is not set
# CONFIG_MACH_HLTEEUR is not set
# CONFIG_MACH_HLTECHNTWU is not set
# CONFIG_MACH_H3G_CHN_OPEN is not set
# CONFIG_MACH_H3G_CHN_CMCC is not set
# CONFIG_MACH_H3GDUOS_CTC is not set
# CONFIG_MACH_H3GDUOS is not set
# CONFIG_MACH_H3GDUOS_CU is not set
# CONFIG_MACH_HLTESPR is not set
# CONFIG_MACH_HLTETMO is not set
# CONFIG_MACH_HLTEUSC is not set
# CONFIG_MACH_HLTEVZW is not set
# CONFIG_MACH_HLTEAUS is not set
# CONFIG_SEC_F_PROJECT is not set
# CONFIG_SEC_KS01_PROJECT is not set
# CONFIG_SEC_JACTIVE_PROJECT is not set
# CONFIG_SEC_JS_PROJECT is not set
# CONFIG_SEC_JSZT_PROJECT is not set
# CONFIG_MACH_H is not set
# CONFIG_MACH_H_LTE is not set
# CONFIG_MACH_HLTE_CHN_CMCC is not set
# CONFIG_MACH_HLTE_CHN_TDOPEN is not set
# CONFIG_MACH_JSGLTE_CHN_CMCC is not set
# CONFIG_SEC_N2_PROJECT is not set
# CONFIG_MACH_N2 is not set
# CONFIG_MACH_N2_LTE is not set
# CONFIG_SEC_LT03_PROJECT is not set
# CONFIG_MACH_LT03 is not set
# CONFIG_MACH_LT03_LTE is not set
# CONFIG_MACH_LT03_EUR is not set
# CONFIG_MACH_LT03_VZW is not set
# CONFIG_MACH_LT03_TMO is not set
# CONFIG_MACH_LT03SKT is not set
# CONFIG_MACH_LT03KTT is not set
# CONFIG_MACH_LT03LGT is not set
# CONFIG_SEC_HEAT_PROJECT is not set
# CONFIG_MACH_HEAT_DYN is not set
# CONFIG_MACH_HEAT_AIO is not set
# CONFIG_SEC_CHAGALL_PROJECT is not set
# CONFIG_MACH_CHAGALL is not set
# CONFIG_MACH_CHAGALL_LTE is not set
# CONFIG_MACH_CHAGALL_SPR is not set
# CONFIG_MACH_CHAGALL_VZW is not set
# CONFIG_MACH_CHAGALL_USC is not set
# CONFIG_MACH_CHAGALL_DCM is not set
# CONFIG_MACH_CHAGALL_KDI is not set
# CONFIG_SEC_KLIMT_PROJECT is not set
# CONFIG_MACH_KLIMT is not set
# CONFIG_MACH_KLIMT_LTE is not set
# CONFIG_MACH_KLIMT_VZW is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MACH_KLIMT_LTE_DCM is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_SEC_PICASSO_PROJECT is not set
# CONFIG_MACH_PICASSO is not set
# CONFIG_MACH_PICASSO_LTE is not set
# CONFIG_MACH_PICASSO_EUR is not set
# CONFIG_MACH_PICASSO_ATT is not set
# CONFIG_MACH_PICASSO_SPR is not set
# CONFIG_SEC_KANAS_PROJECT is not set
# CONFIG_MACH_KANAS3G_CU is not set
# CONFIG_MACH_KANAS3G_CMCC is not set
# CONFIG_MACH_KANAS3G_CTC is not set
# CONFIG_SEC_LOCALE_KOR is not set
# CONFIG_SEC_LOCALE_KOR_H is not set
# CONFIG_SEC_LOCALE_JPN is not set
# CONFIG_SEC_LOCALE_CHN is not set
# CONFIG_MACH_HLTEDCM is not set
# CONFIG_MACH_HLTEKDI is not set
# CONFIG_MACH_JS01LTEDCM is not set
# CONFIG_MACH_JS01LTEZT is not set
# CONFIG_MACH_HLTESKT is not set
# CONFIG_MACH_HLTEKTT is not set
# CONFIG_MACH_HLTELGT is not set
# CONFIG_SEC_FRESCO_PROJECT is not set
# CONFIG_SEC_LOCALE_KOR_FRESCO is not set
# CONFIG_MACH_FRESCOLTESKT is not set
# CONFIG_MACH_FRESCOLTEKTT is not set
# CONFIG_MACH_FRESCOLTELGT is not set
# CONFIG_MACH_FLTESKT is not set
# CONFIG_MACH_KS01SKT is not set
# CONFIG_MACH_KS01KTT is not set
# CONFIG_MACH_KS01LGT is not set
# CONFIG_MACH_JACTIVESKT is not set
# CONFIG_MACH_KS01EUR is not set
# CONFIG_SEC_V2_PROJECT is not set
# CONFIG_MACH_V2 is not set
# CONFIG_MACH_V2_LTE is not set
# CONFIG_SEC_KACTIVE_PROJECT is not set
# CONFIG_MACH_KACTIVELTE_EUR is not set
# CONFIG_MACH_KACTIVELTE_ATT is not set
# CONFIG_MACH_KACTIVELTE_CAN is not set
# CONFIG_MACH_KACTIVELTE_SKT is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MACH_KACTIVELTE_KOR is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_MACH_KACTIVELTE_DCM is not set
# CONFIG_SEC_KSPORTS_PROJECT is not set
# CONFIG_MACH_KSPORTSLTE_SPR is not set
# CONFIG_SAMSUNG_PRODUCT_SHIP is not set
# CONFIG_SEC_LPDDR_6G is not set
# CONFIG_MSM_STACKED_MEMORY is not set
# CONFIG_RTC_AUTO_PWRON is not set
# CONFIG_PARAM_SIZE_983000 is not set
# CONFIG_KERNEL_MSM_CONTIG_MEM_REGION is not set
CONFIG_MSM_AMSS_VERSION=6225
# CONFIG_MSM_AMSS_VERSION_6210 is not set
# CONFIG_MSM_AMSS_VERSION_6220 is not set
CONFIG_MSM_AMSS_VERSION_6225=y
CONFIG_MSM7X00A_USE_GP_TIMER=y
# CONFIG_MSM7X00A_USE_DG_TIMER is not set
CONFIG_MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND=y
# CONFIG_MSM7X00A_SLEEP_MODE_POWER_COLLAPSE is not set
# CONFIG_MSM7X00A_SLEEP_MODE_APPS_SLEEP is not set
# CONFIG_MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT is not set
# CONFIG_MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT is not set
CONFIG_MSM7X00A_SLEEP_MODE=0
# CONFIG_MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND is not set
CONFIG_MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE=y
# CONFIG_MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP is not set
# CONFIG_MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT is not set
# CONFIG_MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT is not set
CONFIG_MSM7X00A_IDLE_SLEEP_MODE=1
CONFIG_MSM7X00A_IDLE_SLEEP_MIN_TIME=20000000
CONFIG_MSM7X00A_IDLE_SPIN_TIME=80000
CONFIG_MSM_IDLE_STATS=y
CONFIG_MSM_IDLE_STATS_FIRST_BUCKET=62500
CONFIG_MSM_IDLE_STATS_BUCKET_SHIFT=2
CONFIG_MSM_IDLE_STATS_BUCKET_COUNT=10
CONFIG_MSM_SUSPEND_STATS_FIRST_BUCKET=1000000000
CONFIG_CPU_HAS_L2_PMU=y
# CONFIG_HTC_HEADSET is not set
# CONFIG_HTC_PWRSINK is not set
# CONFIG_MSM_FIQ_SUPPORT is not set
# CONFIG_MSM_SERIAL_DEBUGGER is not set
# CONFIG_MSM_PROC_COMM is not set
CONFIG_MSM_SMD=y
# CONFIG_MSM_SMD_PKG3 is not set
CONFIG_MSM_SMD_PKG4=y
CONFIG_MSM_SMD_DEBUG=y
CONFIG_MSM_BAM_DMUX=y
CONFIG_MSM_N_WAY_SMD=y
CONFIG_MSM_N_WAY_SMSM=y
CONFIG_MSM_SMP2P=y
CONFIG_MSM_SMP2P_TEST=y
CONFIG_MSM_RESET_MODEM=y
CONFIG_MSM_SMD_LOGGING=y
CONFIG_MSM_IPC_LOGGING=y
CONFIG_MSM_SMD_NMEA=y
CONFIG_MSM_SMD_TTY=y
CONFIG_MSM_SMD_QMI=y
CONFIG_MSM_SMD_PKT=y
# CONFIG_MSM_ONCRPCROUTER is not set
CONFIG_MSM_IPC_ROUTER=y
CONFIG_MSM_IPC_ROUTER_SMD_XPRT=y
CONFIG_MSM_IPC_ROUTER_SECURITY=y
CONFIG_MSM_QMI_INTERFACE=y
# CONFIG_MSM_TEST_QMI_CLIENT is not set
# CONFIG_MSM_DALRPC is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MSM_CPU_FREQ_SET_MIN_MAX is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_MSM_DEVFREQ_CPUBW=y
# CONFIG_MSM_AVS_HW is not set
# CONFIG_MSM_HW3D is not set
CONFIG_AMSS_7X25_VERSION_2009=y
# CONFIG_AMSS_7X25_VERSION_2008 is not set
CONFIG_RTAC=y
# CONFIG_MSM_VREG_SWITCH_INVERTED is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MSM_DMA_TEST is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_WIFI_CONTROL_FUNC=y
# CONFIG_WIFI_MEM_PREALLOC is not set
CONFIG_SURF_FFA_GPIO_KEYPAD=y
CONFIG_MSM_SLEEP_TIME_OVERRIDE=y
# CONFIG_MSM_MEMORY_LOW_POWER_MODE is not set
CONFIG_MSM_PM_TIMEOUT_HALT=y
# CONFIG_MSM_PM_TIMEOUT_RESET_MODEM is not set
# CONFIG_MSM_PM_TIMEOUT_RESET_CHIP is not set
CONFIG_MSM_IDLE_WAIT_ON_MODEM=0
CONFIG_MSM_RPM_REGULATOR_SMD=y
# CONFIG_MSM_SPM_REGULATOR is not set
# CONFIG_MSM_SMCMOD is not set
CONFIG_MSM_SUBSYSTEM_RESTART=y
CONFIG_MSM_SYSMON_COMM=y
CONFIG_MSM_PIL=y
# CONFIG_MSM_PIL_MODEM is not set
# CONFIG_MSM_PIL_QDSP6V3 is not set
# CONFIG_MSM_PIL_LPASS_QDSP6V4 is not set
# CONFIG_MSM_PIL_MODEM_QDSP6V4 is not set
CONFIG_MSM_PIL_LPASS_QDSP6V5=y
CONFIG_MSM_PIL_MSS_QDSP6V5=y
# CONFIG_MSM_PIL_RIVA is not set
# CONFIG_MSM_PIL_TZAPPS is not set
# CONFIG_MSM_PIL_DSPS is not set
# CONFIG_MSM_PIL_VIDC is not set
CONFIG_MSM_PIL_VENUS=y
# CONFIG_MSM_PIL_GSS is not set
# CONFIG_MSM_PIL_PRONTO is not set
CONFIG_MSM_SCM=y
# CONFIG_MSM_BUSPM_DEV is not set
CONFIG_MSM_TZ_LOG=y
CONFIG_MSM_RPM_LOG=y
CONFIG_MSM_RPM_STATS_LOG=y
CONFIG_MSM_RPM_RBCPR_STATS_V2_LOG=y
CONFIG_MSM_DIRECT_SCLK_ACCESS=y
CONFIG_IOMMU_API=y
CONFIG_MSM_GPIOMUX=y
CONFIG_MSM_NATIVE_RESTART=y
CONFIG_MSM_PM=y
CONFIG_MSM_EVENT_TIMER=y
CONFIG_MSM_BUS_SCALING=y
# CONFIG_MSM_BUS_RPM_MULTI_TIER_ENABLED is not set
# CONFIG_L2_SCM_HANDOFF_LOCK is not set
CONFIG_SECURE_MPU_LOCK=y
CONFIG_MSM_WATCHDOG_V2=y
CONFIG_MSM_MEMORY_DUMP=y
CONFIG_MSM_DLOAD_MODE=y
# CONFIG_MSM_JTAG is not set
# CONFIG_MSM_JTAG_MM is not set
# CONFIG_MSM_SLEEP_STATS_DEVICE is not set
CONFIG_MSM_RUN_QUEUE_STATS=y
# CONFIG_MSM_STANDALONE_POWER_COLLAPSE is not set
# CONFIG_MSM_GSBI9_UART is not set
CONFIG_MSM_SHOW_RESUME_IRQ=y
# CONFIG_BT_BCM4335 is not set
# CONFIG_BT_BCM4339 is not set
CONFIG_BT_BCM4354=y
# CONFIG_MSM_FAKE_BATTERY is not set
# CONFIG_MSM_QDSP6_APR is not set
CONFIG_MSM_QDSP6_APRV2=y
# CONFIG_MSM_QDSP6_CODECS is not set
CONFIG_MSM_QDSP6V2_CODECS=y
# CONFIG_MSM_AUDIO_QDSP6 is not set
CONFIG_MSM_AUDIO_QDSP6V2=y
CONFIG_MSM_ADSP_LOADER=y
# CONFIG_MSM_ULTRASOUND_A is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MSM_ULTRASOUND_B is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_MSM_SPM_V1 is not set
CONFIG_MSM_SPM_V2=y
CONFIG_MSM_L2_SPM=y
CONFIG_MSM_MULTIMEDIA_USE_ION=y
CONFIG_MSM_OCMEM=y
CONFIG_MSM_OCMEM_LOCAL_POWER_CTRL=y
CONFIG_MSM_OCMEM_DEBUG=y
# CONFIG_MSM_OCMEM_NONSECURE is not set
# CONFIG_MSM_OCMEM_POWER_DEBUG is not set
# CONFIG_MSM_OCMEM_DEBUG_ALWAYS_ON is not set
# CONFIG_MSM_OCMEM_POWER_DISABLE is not set
# CONFIG_SENSORS_ADSP is not set
CONFIG_MSM_RTB=y
CONFIG_MSM_RTB_SEPARATE_CPUS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MSM_RTB_TIMESTAMP is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_MSM_EBI_ERP is not set
CONFIG_MSM_CACHE_ERP=y
CONFIG_MSM_L1_ERR_PANIC=y
# CONFIG_MSM_L1_RECOV_ERR_PANIC is not set
CONFIG_MSM_L1_ERR_LOG=y
CONFIG_MSM_L2_ERP_PRINT_ACCESS_ERRORS=y
# CONFIG_MSM_L2_ERP_PORT_PANIC is not set
# CONFIG_MSM_L2_ERP_1BIT_PANIC is not set
CONFIG_MSM_L2_ERP_2BIT_PANIC=y
CONFIG_SEC_SSR_DEBUG_LEVEL_CHK=y
# CONFIG_SEC_PERIPHERAL_SECURE_CHK is not set
# CONFIG_MSM_DCVS is not set
# CONFIG_MSM_CPR is not set
CONFIG_HAVE_ARCH_HAS_CURRENT_TIMER=y
# CONFIG_MSM_CACHE_DUMP is not set
# CONFIG_MSM_HSIC_SYSMON is not set
CONFIG_MSM_ENABLE_WDOG_DEBUG_CONTROL=y
# CONFIG_USE_DEV_CTRL_VOLUME is not set
# CONFIG_MSM_CPU_PWRCTL is not set
CONFIG_SEC_THERMISTOR=y
# CONFIG_MSM_UARTDM_Core_v14 is not set
# CONFIG_MSM_COMMON_LOG is not set
CONFIG_MSM_BOOT_STATS=y
# CONFIG_MSM_XPU_ERR_FATAL is not set
# CONFIG_MSM_CPR_REGULATOR is not set
# CONFIG_I2C_ACTUATOR is not set
# CONFIG_SWITCH_DUAL_MODEM is not set
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
# CONFIG_TIMA_RKP is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_TIMA is not set
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
CONFIG_TIMA_LKMAUTH=y
# CONFIG_TIMA_LKMAUTH_CODE_PROT is not set
# CONFIG_TIMA_TEST_INFRA is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_PCM_ROUTE_VOICE_STUB is not set
CONFIG_BT_CALL_FORWARDING=y
CONFIG_KRAIT_REGULATOR=y
# CONFIG_EXTEND_SERIAL_NUM_16 is not set
# CONFIG_MUIC_RESET_PIN_ENABLE is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_TERT_MI2S_ENABLE is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_SEC_SMART_MGR_RUNQUEUE_AVG=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_KERNEL_TEXT_MPU_PROT is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# System MMU
#
#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_STRICT_MEMORY_RWX=y
CONFIG_ARM_NR_BANKS=8
# CONFIG_RESERVE_FIRST_PAGE is not set
CONFIG_CPU_HAS_PMU=y
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_ARM_ERRATA_742230 is not set
# CONFIG_ARM_ERRATA_742231 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_743622 is not set
# CONFIG_ARM_ERRATA_751472 is not set
# CONFIG_ARM_ERRATA_754322 is not set
CONFIG_ARM_ERRATA_754327=y
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_KSAPI is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_ARM_ERRATA_775420 is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_ARM_GIC=y
# CONFIG_FIQ_DEBUGGER is not set
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
CONFIG_ARM_CPU_TOPOLOGY=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_SCU=y
CONFIG_ARM_ARCH_TIMER=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_ARM_ARCH_TIMER_VCT_ACCESS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_LOCAL_TIMERS=y
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_SEC_SLOWPATH=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
CONFIG_SWAP_ENABLE_READAHEAD=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_MEMORY_HOLE_CARVEOUT=y
# CONFIG_USE_USER_ACCESSIBLE_TIMERS is not set
CONFIG_MIN_DIRTY_THRESH_PAGES=2560
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_ZBUD=y
CONFIG_ZCACHE=y
CONFIG_ZSMALLOC=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_ARCH_MEMORY_PROBE is not set
# CONFIG_ARCH_MEMORY_REMOVE is not set
# CONFIG_ENABLE_DMM is not set
# CONFIG_DONT_MAP_HOLE_AFTER_MEMBANK0 is not set
CONFIG_ENABLE_VMALLOC_SAVING=y
# CONFIG_NO_VM_RECLAIM is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_SECCOMP=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
# CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART is not set
# CONFIG_CP_ACCESS is not set
# CONFIG_VMWARE_MVP is not set
#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE=y
CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES=""
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_SEC_DVFS is not set
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_LIMIT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# ARM CPU frequency scaling drivers
#
# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_CPU_FREQ_MSM=y
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_KERNEL_MODE_NEON=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_HAVE_AOUT is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_CPU_FREQ_LIMIT_USERSPACE=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_HAS_WAKELOCK=y
CONFIG_WAKELOCK=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=0
# CONFIG_PM_WAKELOCKS_GC is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
CONFIG_CPU_PM=y
# CONFIG_SUSPEND_TIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_UNIX_DIAG=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_INET_UDP_DIAG=y
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_TCP_CONG_CUBIC=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_DEFAULT_TCP_CONG="cubic"
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_ANDROID_PARANOID_NETWORK is not set
CONFIG_NET_ACTIVITY_STATS=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NETFILTER_NETLINK_ACCT=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NETFILTER_TPROXY=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_NETFILTER_XT_SET is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
# CONFIG_IP_SET_BITMAP_IP is not set
# CONFIG_IP_SET_BITMAP_IPMAC is not set
# CONFIG_IP_SET_BITMAP_PORT is not set
# CONFIG_IP_SET_HASH_IP is not set
# CONFIG_IP_SET_HASH_IPPORT is not set
# CONFIG_IP_SET_HASH_IPPORTIP is not set
# CONFIG_IP_SET_HASH_IPPORTNET is not set
# CONFIG_IP_SET_HASH_NET is not set
# CONFIG_IP_SET_HASH_NETPORT is not set
# CONFIG_IP_SET_HASH_NETIFACE is not set
# CONFIG_IP_SET_LIST_SET is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_IP_VS is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_VPNCLIENT_SECURITY=y
CONFIG_VPNCLIENT_PROC_UID=1000
CONFIG_VPNCLIENT_PROC_GID=1000
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_IP_NF_MATCH_RPFILTER=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_REJECT_SKERR is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
# CONFIG_IP_NF_TARGET_NATTYPE_MODULE is not set
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_IP6_NF_MATCH_MH is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_IP6_NF_MATCH_RPFILTER=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
# CONFIG_IP6_NF_TARGET_REJECT_SKERR is not set
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
# CONFIG_BRIDGE_EBT_T_FILTER is not set
# CONFIG_BRIDGE_EBT_T_NAT is not set
# CONFIG_BRIDGE_EBT_802_3 is not set
# CONFIG_BRIDGE_EBT_AMONG is not set
# CONFIG_BRIDGE_EBT_ARP is not set
# CONFIG_BRIDGE_EBT_IP is not set
# CONFIG_BRIDGE_EBT_IP6 is not set
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
# CONFIG_BRIDGE_EBT_STP is not set
# CONFIG_BRIDGE_EBT_VLAN is not set
# CONFIG_BRIDGE_EBT_ARPREPLY is not set
# CONFIG_BRIDGE_EBT_DNAT is not set
# CONFIG_BRIDGE_EBT_MARK_T is not set
# CONFIG_BRIDGE_EBT_REDIRECT is not set
# CONFIG_BRIDGE_EBT_SNAT is not set
# CONFIG_BRIDGE_EBT_LOG is not set
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NET_SCH_INGRESS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NET_CLS_BASIC=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NET_CLS_CGROUP=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_NET_ACT_MIRRED=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_DNS_RESOLVER is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set
# CONFIG_SOCKEV_NLMCAST is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCISMD is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_ATH3K is not set
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIUART_IBS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_MSM_SLEEP is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_MSM_BT_POWER is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_CFG80211_ALLOW_RECONNECT=y
CONFIG_CFG80211_REG_NOT_UPDATED=y
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_PM=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_NFC_QNCI is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_DEVTMPFS_MOUNT=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_GENLOCK=y
CONFIG_GENLOCK_MISCDEVICE=y
CONFIG_SYNC=y
CONFIG_SW_SYNC=y
# CONFIG_SW_SYNC_USER is not set
CONFIG_CMA=y
# CONFIG_CMA_PAGE_COUNTING is not set
# CONFIG_CMA_DEBUG is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CMA_PINPAGE_MIGRATION=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Default contiguous memory area size:
#
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CMA_SIZE_MBYTES=64
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_SPI=y
CONFIG_OF_SPMI=y
CONFIG_OF_SLIMBUS=y
CONFIG_OF_BATTERYDATA=y
CONFIG_OF_SUBCMDLINE_PARSE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_ZRAM=y
CONFIG_ZRAM_LZ4_COMPRESS=y
# CONFIG_ZRAM_DEBUG is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Misc devices
#
CONFIG_SEC_FPGA_ICE40XX=y
CONFIG_IR_REMOCON_FPGA=y
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_MUIC_MAX77804K_SUPPORT_DESKDOCK is not set
CONFIG_MUIC_MAX77804K_SUPPORT_MHL_CABLE_DETECTION=y
# CONFIG_MUIC_MAX77804K_SUPPORT_HMT_DETECTION is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_SAMSUNG_JACK=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_SAMSUNG_JACK_VOICE_BTN is not set
# CONFIG_SAMSUNG_JACK_READ_BTN_ADC is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_EARJACK_ADC_SYSFS is not set
# CONFIG_HMC6352 is not set
# CONFIG_SENSORS_AK8975 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_UID_STAT=y
# CONFIG_BMP085 is not set
# CONFIG_USB_SWITCH_RT8973 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SM5502_MUIC is not set
# CONFIG_SM5504_MUIC is not set
# CONFIG_USB_SWITCH_TSU6721 is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MUIC_SUPPORT_RUSTPROOF is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_MAX77804K_MUIC=y
# CONFIG_USB_SWITCH_FSA9485 is not set
# CONFIG_MUIC_FSA9485_SUPPORT_CAR_DOCK is not set
# CONFIG_WL127X_RFKILL is not set
# CONFIG_TSPP is not set
# CONFIG_CI_BRIDGE_SPI is not set
# CONFIG_HAPTIC_ISA1200 is not set
CONFIG_QSEECOM=y
# CONFIG_QFP_FUSE is not set
CONFIG_QPNP_MISC=y
CONFIG_SEC_MISC=y
# CONFIG_CHECK_SIMSLOT_COUNT is not set
# CONFIG_BCM2079X_NFC_I2C is not set
# CONFIG_SEC_NFC_I2C is not set
# CONFIG_SEC_NFC is not set
CONFIG_NFC_PN547=y
CONFIG_NFC_PN547_PMC8974_CLK_REQ=y
# CONFIG_NFC_PN547_8226_USE_BBCLK2 is not set
# CONFIG_NFC_N5_PMC8974_CLK_REQ is not set
# CONFIG_NFC_I2C_OVERWRITE is not set
CONFIG_TI_DRV2667=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_UID_CPUTIME=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_RT8973_JIG_WAKEUP is not set
# CONFIG_MUIC_DET_JACK is not set
# CONFIG_SGLTE_QSC_MODEM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_IWMC3200TOP is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_SEC_MODEM is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
#
# Altera FPGA firmware download module
#
CONFIG_DUALWAVE=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_BLK_DEV_DM_BUILTIN=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_REQ_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_DUMMY is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_EQUALIZER is not set
CONFIG_MII=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_VETH=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0 is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_MSM_RMNET is not set
CONFIG_MSM_RMNET_BAM=y
# CONFIG_QFEC is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_AX88796 is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_SEEQ8005 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_MPPE=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOE is not set
CONFIG_PPPOLAC=y
CONFIG_PPPOPNS=y
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_USB_NET_AX8817X=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
# CONFIG_MSM_RMNET_USB is not set
CONFIG_WLAN=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_LIBRA_SDIOIF is not set
# CONFIG_ATH6K_LEGACY_EXT is not set
# CONFIG_WCNSS_CORE is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_BCM4330 is not set
# CONFIG_BCM4343 is not set
# CONFIG_BCM4334 is not set
# CONFIG_BCM4335 is not set
# CONFIG_BCM4339 is not set
CONFIG_BCM4354=y
# CONFIG_BCM43241 is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_BCM43455 is not set
# CONFIG_BCM4334W is not set
# CONFIG_BCM43454 is not set
linux-samsung-klte: fix firmware path to match mainline (MR 1214)
2020-05-07 18:16:17 +00:00
CONFIG_BCMDHD_FW_PATH="/lib/firmware/postmarketos/brcm/brcmfmac4354-sdio.bin"
CONFIG_BCMDHD_NVRAM_PATH="/lib/firmware/postmarketos/brcm/brcmfmac4354-sdio.samsung,klte.txt"
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_BROADCOM_WIFI_RESERVED_MEM=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_WIFI_BROADCOM_COB is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_WLAN_REGION_CODE=100
# CONFIG_WIFI_2GHZ_VHT_NO_SUPPORT is not set
CONFIG_WLAIBSS=y
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_MWIFIEX is not set
# CONFIG_LGUIWLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYRESET is not set
# CONFIG_INPUT_BOOSTER is not set
# CONFIG_INPUT_EXPANDED_ABS is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ABOV_TOUCH is not set
# CONFIG_KEYBOARD_ABOV_TOUCH_PATEK is not set
# CONFIG_INPUT_ENABLED is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_QPNP is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_QCIKBD is not set
# CONFIG_SENSORS_HALL_DEBOUNCE is not set
CONFIG_SENSORS_HALL=y
CONFIG_SENSORS_HALL_IRQ_CTRL=y
# CONFIG_KEYBOARD_TC360_TOUCHKEY is not set
CONFIG_USE_VM_KEYBOARD_REJECT=y
CONFIG_KEYBOARD_CYPRESS_TOUCHKEY=y
# CONFIG_GLOVE_TOUCH is not set
# CONFIG_KEYBOARD_CYPRESS_TOUCHKEY_H is not set
# CONFIG_KEYBOARD_CYPRESS_TOUCHKEY_HE is not set
# CONFIG_KEYBOARD_CYPRESS_TOUCHKEY_C is not set
# CONFIG_KEYBOARD_CYPRESS_TOUCHKEY_KS01 is not set
# CONFIG_KEYBOARD_CYPRESS_TKEY_HL is not set
# CONFIG_KEYBOARD_CYPRESS_TOUCHKEY_S3 is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_TOUCHDISC_VTD518_SHINETSU is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ZINITIX_BT532 is not set
# CONFIG_TOUCHSCREEN_MMS252 is not set
# CONFIG_TOUCHSCREEN_MMS300 is not set
# CONFIG_TOUCHSCREEN_MMS144 is not set
# CONFIG_TOUCHSCREEN_MMS134S is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MAXTOUCH is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_ATMEL_MAXTOUCH_TS is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
# CONFIG_SEC_TSP_FACTORY is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_TOUCHSCREEN_SYNAPTICS_PREVENT_HSYNC_LEAKAGE is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_TOUCHSCREEN_ATMEL_MXT1664S is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT1188S is not set
# CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_MSM_LEGACY is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_CY8C_TS is not set
# CONFIG_TOUCHSCREEN_CYTTSP_I2C_QC is not set
# CONFIG_TOUCHSCREEN_FT5X06 is not set
# CONFIG_TOUCHSCREEN_GEN_VKEYS is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_I2C is not set
# CONFIG_TOUCHSCREEN_GT9XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX_BT531 is not set
# CONFIG_INPUT_WACOM is not set
# CONFIG_EPEN_WACOM_G5SP is not set
# CONFIG_EPEN_WACOM_G9PM is not set
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI_G=y
# CONFIG_TOUCHSCREEN_IST30XX is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI_S5000 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI_PATEK is not set
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_I2C=y
# CONFIG_INPUT_WACOM_HL is not set
# CONFIG_EPEN_WACOM_G9PL is not set
# CONFIG_EPEN_WACOM_G9PLL is not set
# CONFIG_EPEN_WACOM_G10PM is not set
# CONFIG_TOUCHSCREEN_MMS136 is not set
# CONFIG_TOUCHSCREEN_FTS is not set
# CONFIG_TOUCHSCREEN_FTS_S is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI_JSGLTE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_HBTP_INPUT is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYCHORD is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_GPIO=y
# CONFIG_INPUT_ISA1200_FF_MEMLESS is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_BOSCH_BMA150 is not set
# CONFIG_STM_LIS3DH is not set
# CONFIG_BMP18X is not set
# CONFIG_SENSORS_MMA8X5X is not set
# CONFIG_SENSORS_STK3X1X is not set
# CONFIG_SENSORS_CAPELLA_CM36283 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_N_SMUX is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_MSM is not set
CONFIG_SERIAL_MSM_HS=y
CONFIG_SERIAL_MSM_HSL=y
CONFIG_SERIAL_MSM_HSL_CONSOLE=y
# CONFIG_SERIAL_BCM_BT_LPM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_MSM_SMD is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
#
# Diag Support
#
CONFIG_DIAG_CHAR=y
#
# DIAG traffic over USB
#
CONFIG_DIAG_OVER_USB=y
#
# SDIO support for DIAG
#
#
# HSIC/SMUX support for DIAG
#
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_MSM=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_NVRAM is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_DCC_TTY is not set
# CONFIG_RAMOOPS is not set
CONFIG_MSM_ADSPRPC=y
# CONFIG_MSM_RDBG is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_MSM=y
CONFIG_I2C_QUP=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_QUP=y
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_MSM_QPNP_INT=y
CONFIG_SLIMBUS=y
# CONFIG_SLIMBUS_MSM_CTRL is not set
CONFIG_SLIMBUS_MSM_NGD=y
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_MSM_V1 is not set
# CONFIG_GPIO_MSM_V2 is not set
CONFIG_GPIO_MSM_V3=y
# CONFIG_GPIO_FSM9XXX is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MC5587 is not set
CONFIG_GPIO_PCAL6416A=y
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PM8XXX_RPC is not set
CONFIG_GPIO_QPNP_PIN=y
CONFIG_GPIO_QPNP_PIN_DEBUG=y
# CONFIG_SEC_GPIO_DVS is not set
CONFIG_W1=y
CONFIG_W1_WORKQUEUE=y
CONFIG_W1_FAST_CHECK=y
# CONFIG_W1_CF is not set
CONFIG_W1_SN=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_GPIO_MSM=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_W1_SLAVE_DS28EL15=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_BATTERY_MSM8X60 is not set
# CONFIG_SMB137B_CHARGER is not set
# CONFIG_SMB137C_CHARGER is not set
# CONFIG_SMB349_CHARGER is not set
# CONFIG_SMB350_CHARGER is not set
# CONFIG_BATTERY_BQ27520 is not set
# CONFIG_SMB358_CHARGER is not set
# CONFIG_BATTERY_BQ27541 is not set
# CONFIG_BATTERY_BQ28400 is not set
# CONFIG_QPNP_CHARGER is not set
# CONFIG_QPNP_SEC_CHARGER is not set
# CONFIG_LTC4088_CHARGER is not set
# CONFIG_BATTERY_BCL is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_QPNP_BMS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_EPM_ADC=y
CONFIG_SENSORS_QPNP_ADC_VOLTAGE=y
# CONFIG_SENSORS_QPNP_ADC_CURRENT is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_MSM_POPMEM is not set
# CONFIG_THERMAL_TSENS is not set
# CONFIG_THERMAL_TSENS8960 is not set
CONFIG_THERMAL_TSENS8974=y
CONFIG_THERMAL_MONITOR=y
CONFIG_THERMAL_QPNP=y
CONFIG_THERMAL_QPNP_ADC_TM=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MAX77803 is not set
CONFIG_MFD_MAX77804K=y
# CONFIG_MFD_MAX77888 is not set
# CONFIG_MFD_MAX77823 is not set
# CONFIG_MFD_MAX77828 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_PM8821_IRQ is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_WCD9304_CODEC is not set
# CONFIG_WCD9310_CODEC is not set
CONFIG_WCD9320_CODEC=y
# CONFIG_WCD9306_CODEC is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_MEM_ACC is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MAX77804K=y
# CONFIG_REGULATOR_ONSEMI_NCP6335D is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_MSM_GPIO is not set
CONFIG_REGULATOR_STUB=y
CONFIG_REGULATOR_QPNP=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_RC_CORE=y
CONFIG_LIRC=y
# CONFIG_USER_RC_INPUT is not set
# CONFIG_USER_SP_RC_INPUT is not set
CONFIG_RC_MAP=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_LIRC_CODEC=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
#
# Qualcomm MSM Camera And Video
#
# CONFIG_MSM_CAMERA is not set
CONFIG_MSMB_CAMERA=y
# CONFIG_MSMB_CAMERA_DEBUG is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_MSMB_CAMERA_MM=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_MSM_CAMERA_SENSOR=y
CONFIG_MSM_CPP=y
CONFIG_MSM_CCI=y
# CONFIG_MSM_CSI20_HEADER is not set
CONFIG_MSM_CSI30_HEADER=y
CONFIG_MSM_CSIPHY=y
CONFIG_MSM_CSID=y
CONFIG_MSM_EEPROM=y
CONFIG_MSM_ISPIF=y
# CONFIG_S5K3L1YX is not set
# CONFIG_S5K4E5YA is not set
# CONFIG_IMX134 is not set
CONFIG_IMX135=y
# CONFIG_S5K6B2YX is not set
# CONFIG_OV2720 is not set
# CONFIG_MT9M114 is not set
# CONFIG_MSM_V4L2_VIDEO_OVERLAY_DEVICE is not set
CONFIG_MSMB_JPEG=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_S5K8B1YX=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_COMPANION=y
CONFIG_MSM_VIDC_V4L2=y
# CONFIG_MSM_WFD is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_SECURE_DEMUX_ENABLE is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_MSM_VCAP is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_MSM_MEM=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=y
#
# Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
#
# MPEG video encoders
#
# CONFIG_VIDEO_CX2341X is not set
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_AK881X is not set
#
# Camera sensor devices
#
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_TCM825X is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_AS3645A is not set
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_TM6000 is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_JPN_DEMUX_MOD is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_TDMB is not set
# CONFIG_ISDBTMM is not set
# CONFIG_ISDBT is not set
# CONFIG_ISDBT_SPMI is not set
# CONFIG_ISDBT_ANT_DET is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_ISDBT_F_TYPE_ANTENNA is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_MTV is not set
#
# Graphics support
#
# CONFIG_DRM is not set
CONFIG_ION=y
CONFIG_ION_MSM=y
# CONFIG_DTCP_ION_PHYS is not set
CONFIG_MSM_KGSL=y
# CONFIG_MSM_KGSL_CFF_DUMP is not set
# CONFIG_MSM_KGSL_PSTMRTMDMP_CP_STAT_NO_DETAIL is not set
# CONFIG_MSM_KGSL_PSTMRTMDMP_NO_IB_DUMP is not set
# CONFIG_MSM_KGSL_PSTMRTMDMP_RB_HEX is not set
CONFIG_MSM_KGSL_2D=y
CONFIG_MSM_ADRENO_DEFAULT_GOVERNOR="msm-adreno-tz"
CONFIG_MSM_Z180_DEFAULT_GOVERNOR="performance"
CONFIG_KGSL_PER_PROCESS_PAGE_TABLE=y
CONFIG_MSM_KGSL_PAGE_TABLE_SIZE=0xFFF0000
CONFIG_MSM_KGSL_PAGE_TABLE_COUNT=8
CONFIG_MSM_KGSL_MMU_PAGE_FAULT=y
# CONFIG_MSM_KGSL_DISABLE_SHADOW_WRITES is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_MSM_VIDC_CONTENT_PROTECTION is not set
CONFIG_VIDEO_MHL_V2=y
# CONFIG_VIDEO_MHL_SII8246 is not set
CONFIG_MHL_VERSION=0x21
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MUIC_SUPPORT_MULTIMEDIA_DOCK is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_FB_MSM=y
# CONFIG_FB_MSM_BACKLIGHT is not set
# CONFIG_FB_MSM_LOGO is not set
# CONFIG_FB_MSM_LCDC_HW is not set
# CONFIG_FB_MSM_TRIPLE_BUFFER is not set
# CONFIG_FB_MSM_MDP_HW is not set
CONFIG_FB_MSM_MDSS_COMMON=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_MDP_DEBUG_FS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_FB_MSM_MDP22 is not set
# CONFIG_FB_MSM_MDP30 is not set
# CONFIG_FB_MSM_MDP31 is not set
# CONFIG_FB_MSM_MDP40 is not set
CONFIG_FB_MSM_MDSS=y
# CONFIG_FB_MSM_MDP_NONE is not set
# CONFIG_FB_MSM_EBI2 is not set
# CONFIG_FB_MSM_MDDI is not set
# CONFIG_FB_MSM_MIPI_DSI is not set
# CONFIG_FB_MSM_LCDC is not set
CONFIG_FB_MSM_LVDS=y
# CONFIG_FB_MSM_EXTMDDI is not set
# CONFIG_FB_MSM_TVOUT is not set
# CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON is not set
# CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON_VGA is not set
# CONFIG_FB_MSM_MDDI_ORISE is not set
# CONFIG_FB_MSM_MDDI_QUICKVX is not set
# CONFIG_FB_MSM_MDDI_AUTO_DETECT is not set
# CONFIG_FB_MSM_LCDC_AUTO_DETECT is not set
# CONFIG_FB_MSM_LCDC_PANEL is not set
# CONFIG_FB_MSM_MIPI_DSI_TOSHIBA is not set
# CONFIG_FB_MSM_MIPI_DSI_RENESAS is not set
# CONFIG_FB_MSM_MIPI_DSI_SIMULATOR is not set
# CONFIG_FB_MSM_MIPI_DSI_NOVATEK is not set
# CONFIG_FB_MSM_MIPI_DSI_ORISE is not set
# CONFIG_FB_MSM_LCDC_ST15_WXGA is not set
# CONFIG_FB_MSM_LCDC_PRISM_WVGA is not set
# CONFIG_FB_MSM_LCDC_SAMSUNG_WSVGA is not set
# CONFIG_FB_MSM_LCDC_CHIMEI_WXGA is not set
# CONFIG_FB_MSM_LCDC_GORDON_VGA is not set
# CONFIG_FB_MSM_LCDC_TOSHIBA_WVGA_PT is not set
# CONFIG_FB_MSM_LCDC_TOSHIBA_FWVGA_PT is not set
# CONFIG_FB_MSM_LCDC_SHARP_WVGA_PT is not set
# CONFIG_FB_MSM_LCDC_AUO_WVGA is not set
# CONFIG_FB_MSM_LCDC_TRULY_HVGA_IPS3P2335 is not set
# CONFIG_FB_MSM_LCDC_SAMSUNG_OLED_PT is not set
# CONFIG_FB_MSM_LCDC_NT35582_WVGA is not set
# CONFIG_FB_MSM_LCDC_WXGA is not set
CONFIG_FB_MSM_LVDS_CHIMEI_WXGA=y
# CONFIG_FB_MSM_LVDS_FRC_FHD is not set
# CONFIG_FB_MSM_MIPI_TOSHIBA_VIDEO_WVGA_PT is not set
# CONFIG_FB_MSM_MIPI_TOSHIBA_VIDEO_WSVGA_PT is not set
# CONFIG_FB_MSM_MIPI_TOSHIBA_VIDEO_WUXGA is not set
# CONFIG_FB_MSM_MIPI_NOVATEK_VIDEO_QHD_PT is not set
# CONFIG_FB_MSM_MIPI_NOVATEK_CMD_QHD_PT is not set
# CONFIG_FB_MSM_MIPI_ORISE_VIDEO_720P_PT is not set
# CONFIG_FB_MSM_MIPI_ORISE_CMD_720P_PT is not set
# CONFIG_FB_MSM_MIPI_RENESAS_VIDEO_FWVGA_PT is not set
# CONFIG_FB_MSM_MIPI_RENESAS_CMD_FWVGA_PT is not set
# CONFIG_FB_MSM_MIPI_NT35510_VIDEO_WVGA_PT is not set
# CONFIG_FB_MSM_MIPI_NT35510_CMD_WVGA_PT is not set
# CONFIG_FB_MSM_MIPI_NT35516_VIDEO_QHD_PT is not set
# CONFIG_FB_MSM_MIPI_NT35516_CMD_QHD_PT is not set
# CONFIG_FB_MSM_MIPI_CHIMEI_WXGA is not set
# CONFIG_FB_MSM_MIPI_CHIMEI_WUXGA is not set
# CONFIG_FB_MSM_MIPI_SIMULATOR_VIDEO is not set
CONFIG_FB_MSM_LVDS_CHIMEI_WXGA_PANEL=y
# CONFIG_FB_MSM_LVDS_FRC_FHD_PANEL is not set
# CONFIG_FB_MSM_MIPI_PANEL_DETECT is not set
# CONFIG_FB_MSM_MDDI_PANEL_AUTO_DETECT is not set
# CONFIG_FB_MSM_LCDC_PANEL_AUTO_DETECT is not set
# CONFIG_FB_MSM_LCDC_MIPI_PANEL_AUTO_DETECT is not set
# CONFIG_FB_MSM_LVDS_MIPI_PANEL_DETECT is not set
# CONFIG_FB_MSM_MDDI_PRISM_WVGA is not set
# CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA_PORTRAIT is not set
# CONFIG_FB_MSM_MDDI_TOSHIBA_VGA is not set
# CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA is not set
# CONFIG_FB_MSM_MDDI_SHARP_QVGA_128x128 is not set
# CONFIG_FB_MSM_MIPI_TOSHIBA_VIDEO_WVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_TOSHIBA_VIDEO_WSVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_TOSHIBA_VIDEO_WUXGA_PANEL is not set
# CONFIG_FB_MSM_MIPI_NOVATEK_VIDEO_QHD_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_NOVATEK_CMD_QHD_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_ORISE_VIDEO_720P_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_ORISE_CMD_720P_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_RENESAS_VIDEO_FWVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_RENESAS_CMD_FWVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_CHIMEI_WXGA_PANEL is not set
# CONFIG_FB_MSM_MIPI_CHIMEI_WUXGA_PANEL is not set
# CONFIG_FB_MSM_MIPI_TRULY_VIDEO_WVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_NT35510_VIDEO_WVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_NT35510_CMD_WVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_NT35516_VIDEO_QHD_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_NT35516_CMD_QHD_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_SIMULATOR_VIDEO_PANEL is not set
# CONFIG_FB_MSM_EBI2_TMD_QVGA_EPSON_QCIF is not set
# CONFIG_FB_MSM_PANEL_NONE is not set
# CONFIG_FB_MSM_EXT_INTERFACE_COMMON is not set
# CONFIG_FB_MSM_HDMI_COMMON is not set
# CONFIG_FB_MSM_HDMI_3D is not set
# CONFIG_FB_MSM_EBI2_EPSON_S1D_QVGA_PANEL is not set
# CONFIG_FB_MSM_EBI2_PANEL_DETECT is not set
# CONFIG_FB_MSM_QPIC_ILI_QVGA_PANEL is not set
# CONFIG_FB_MSM_QPIC_PANEL_DETECT is not set
CONFIG_FB_MSM_MDSS_WRITEBACK=y
CONFIG_FB_MSM_MDSS_HDMI_PANEL=y
# CONFIG_FB_MSM_MDSS_HDMI_MHL_SII8334 is not set
# CONFIG_FB_MSM_MDSS_SHARP_HD_PANEL is not set
# CONFIG_BACKLIGHT_KTD2801 is not set
# CONFIG_MDNIE_VIDEO_ENHANCED is not set
# CONFIG_FB_MSM_MDSS_DSI_CTRL_STATUS is not set
# CONFIG_FB_MSM_MDSS_MDP3 is not set
CONFIG_FB_MSM_MDSS_DBG_SEQ_TICK=y
CONFIG_FB_MSM_MDSS_DSI_DBG=y
# CONFIG_SAMSUNG_CMC624 is not set
# CONFIG_FB_MSM_MIPI_DSI_NOVATEK_NT35596 is not set
# CONFIG_FB_MSM_MIPI_NOVATEK_VIDEO_HD_PT is not set
# CONFIG_FB_MSM_MIPI_NOVATEK_VIDEO_HD_PT_PANEL is not set
CONFIG_MDNIE_LITE_TUNING=y
# CONFIG_MDNIE_ENHENCED_LOCAL_CE is not set
# CONFIG_MDNIE_TFT_MSM8X26 is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_OCTA_VIDEO_FULL_HD_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_MAGNA_OCTA_VIDEO_720P_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_MAGNA_OCTA_VIDEO_WXGA_PT_DUAL_PANEL is not set
# CONFIG_FB_MSM_MDSS_MAGNA_OCTA_VIDEO_720P_PT_PANEL is not set
# CONFIG_FB_MSM_MDSS_MAGNA_LDI_EA8061 is not set
# CONFIG_FB_MSM_MDSS_SAMSUNG_OCTA_VIDEO_720P_PT_PANEL is not set
# CONFIG_FB_MSM_MDSS_MSM8X26 is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_OCTA_CMD_FULL_HD_PT_PANEL is not set
CONFIG_FB_MSM_MIPI_SAMSUNG_OCTA_CMD_WQHD_PT_PANEL=y
# CONFIG_FB_MSM_MIPI_MAGNA_OCTA_CMD_HD_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_YOUM_CMD_FULL_HD_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_S6E8AA0A_720P_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_S6E88A0_QHD_VIDEO_PT_PANEL is not set
# CONFIG_FB_MSM_MDSS_S6E8AA0A_HD_PANEL is not set
# CONFIG_MIPI_LCD_S6E3FA0_FORCE_VIDEO_MODE is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_OCTA_VIDEO_WVGA_S6E88A0_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_CMD_WVGA_ILI9806B_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_VIDEO_WVGA_NT35502_PT_PANEL is not set
# CONFIG_FB_MSM_MDSS_HX8369B_TFT_VIDEO_WVGA_PT_PANEL is not set
# CONFIG_FB_MSM_MDSS_HX8394C_TFT_VIDEO_720P_PANEL is not set
# CONFIG_BACKLIGHT_IC_KTD253 is not set
# CONFIG_BACKLIGHT_IC_KTD2801 is not set
# CONFIG_REGULATOR_LP8720 is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_NEW_UX_MDNIE is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_DUAL_LCD is not set
# CONFIG_LCD_HMT is not set
# CONFIG_FB_MSM_MIPI_JDI_TFT_VIDEO_FULL_HD_PT_PANEL is not set
# CONFIG_SUPPORT_DISPLAY_OCTA_TFT is not set
CONFIG_FB_MSM_CAMERA_CSC=y
# CONFIG_FB_MSM_EDP_SAMSUNG is not set
# CONFIG_EDP_ESD_FUNCTION is not set
# CONFIG_EDP_TCON_MDNIE is not set
# CONFIG_CABC_TUNING is not set
# CONFIG_CABC_TUNING_HX8394C is not set
# CONFIG_FB_MSM_MIPI_TFT_VIDEO_FULL_HD_PT_PANEL is not set
# CONFIG_ESD_ERR_FG_RECOVERY is not set
# CONFIG_LCD_CRACK_RECOVERY is not set
# CONFIG_FB_MSM_MDSS_SDC_WXGA_PANEL is not set
# CONFIG_FB_MSM_MDSS_CPT_QHD_PANEL is not set
# CONFIG_LCD_CONNECTION_CHECK is not set
# CONFIG_SAMSUNG_DEBUG_DISPLAY is not set
# CONFIG_FB_MSM_MDSS_TC_DSI2LVDS_WXGA_PANEL is not set
# CONFIG_TC358764_I2C_CONTROL is not set
# CONFIG_LCD_FORCE_VIDEO_MODE is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_TFT_VIDEO_WQXGA_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_OCTA_CMD_WQXGA_S6TNMR7_PT_PANEL is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_OCTA_CMD_WQXGA_S6E3HA1_PT_PANEL is not set
# CONFIG_FB_MSM_MDSS_MAGNA_OCTA_VIDEO_720P_PANEL is not set
# CONFIG_FB_MSM_MIPI_SAMSUNG_OCTA_VIDEO_HD_PANEL is not set
# CONFIG_EDP_EXTERNAL_POWER is not set
# CONFIG_FB_MSM8x26_MDSS_CHECK_LCD_CONNECTION is not set
# CONFIG_GET_LCD_ATTACHED is not set
# CONFIG_GET_LCD_PCD_DETECTED is not set
# CONFIG_WHITE_PANEL is not set
# CONFIG_DSI_HOST_DEBUG is not set
# CONFIG_MDSS_DSI_EVENT_HANDLER_PANEL is not set
# CONFIG_CLK_TUNING is not set
# CONFIG_MDP_NEGATIVE_SUPPORT is not set
# CONFIG_MDSS_UD_FLIP is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_PANEL_RECOVERY is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_SOC=y
#
# MSM SoC Audio support
#
CONFIG_SND_SOC_MSM_HOSTLESS_PCM=y
CONFIG_SND_SOC_MSM_QDSP6V2_INTF=y
# CONFIG_SND_SOC_QDSP6 is not set
CONFIG_SND_SOC_QDSP6V2=y
CONFIG_AUDIO_OCMEM=y
CONFIG_SND_SOC_MSM8974=y
CONFIG_SND_SOC_APQ8074=y
# CONFIG_SND_SOC_ES_515 is not set
# CONFIG_SND_SOC_ES_CDEV is not set
CONFIG_JACK_AUDIO=y
CONFIG_SEC_DHA_SOL_MAL=y
# CONFIG_AUDIO_DUAL_CP is not set
# CONFIG_SEC_DEVIDE_RINGTONE_GAIN is not set
# CONFIG_LDO_SUBMIC_BIAS is not set
# CONFIG_LDO_EARMIC_BIAS is not set
# CONFIG_GPIO_MAINMIC_BIAS is not set
# CONFIG_DSDA_VIA_UART is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX98504A is not set
# CONFIG_SND_SOC_MAX98505 is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_SND_SOC_MAX98506 is not set
# CONFIG_SND_SOC_MAXIM_DSM_CAL is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_SND_SOC_WCD9320=y
# CONFIG_SND_SOC_ES325 is not set
# CONFIG_SND_SOC_ES325_ATLANTIC is not set
# CONFIG_SND_SOC_ES325_SLIM is not set
# CONFIG_ES325_UART_WORKAROUND is not set
# CONFIG_ES325_UART_WORKAROUND_ENG_ONLY is not set
CONFIG_SND_SOC_ES705=y
CONFIG_SND_SOC_MSM_STUB=y
CONFIG_SND_SOC_MSM_HDMI_CODEC_RX=y
#
# eS705 Bus Interface
#
CONFIG_SND_SOC_ES705_SLIM=y
# CONFIG_SND_SOC_ES705_I2C is not set
# CONFIG_SND_SOC_ES705_SPI is not set
# CONFIG_SND_SOC_ES705_UART is not set
# CONFIG_SND_SOC_ES705_I2S is not set
# CONFIG_SND_SOC_ES704_TEMP is not set
# CONFIG_SND_SOC_ES515 is not set
# CONFIG_SOUND_PRIME is not set
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
#
# HID support
#
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=y
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
CONFIG_HID_GENERIC=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_KK_UPGRADE is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_ROCCAT=y
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_SYNAPTICS_BT=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=y
CONFIG_HID_WACOM_POWER_SUPPLY=y
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZAGG=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_OVR is not set
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_DEBUG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_PEHCI_HCD is not set
# CONFIG_USB_ICE40_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
# CONFIG_USB_CCID_BRIDGE is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_USB_LIBUSUAL is not set
CONFIG_USB_STORAGE_DETECT=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_CSVT is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_QCOM_DIAG_BRIDGE is not set
# CONFIG_USB_QCOM_MDM_BRIDGE is not set
# CONFIG_USB_QCOM_KS_BRIDGE is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_CI13XXX_MSM is not set
# CONFIG_USB_CI13XXX_MSM_HSIC is not set
CONFIG_USB_DWC3_MSM=y
# CONFIG_USB_MSM_72K is not set
# CONFIG_USB_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_G_ANDROID=y
CONFIG_USB_ANDROID_SAMSUNG_COMPOSITE=y
CONFIG_USB_DUN_SUPPORT=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_USB_ANDROID_SAMSUNG_MTP is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_USB_ANDROID_SAMSUNG_SIDESYNC=y
# CONFIG_USB_LOCK_SUPPORT_FOR_MDM is not set
CONFIG_USB_NCM_SUPPORT_MTU_CHANGE=y
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
CONFIG_USB_CSW_HACK=y
# CONFIG_USB_MSC_PROFILING is not set
CONFIG_MODEM_SUPPORT=y
CONFIG_RMNET_SMD_CTL_CHANNEL=""
CONFIG_RMNET_SMD_DATA_CHANNEL=""
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_USB_OTG_WAKELOCK is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
# CONFIG_USB_MSM_OTG_72K is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_MSM_OTG is not set
CONFIG_USB_HOST_NOTIFY=y
# CONFIG_USB_DEBUG_DETEAILED_LOG is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_PERF_PROFILING=y
CONFIG_MMC_SUPPORT_STLOG=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_CLKGATE=y
# CONFIG_MMC_EMBEDDED_SDIO is not set
CONFIG_MMC_PARANOID_SD_INIT=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=32
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_BLOCK_DEFERRED_RESUME=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
CONFIG_MMC_SUPPORT_BKOPS_MODE=y
CONFIG_MMC_BKOPS_NODE_UID=1000
CONFIG_MMC_BKOPS_NODE_GID=1001
CONFIG_MMC_BLOCK_TEST=y
# CONFIG_MMC_CPRM is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_MSM=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_MSM_SDC1_SUPPORT=y
# CONFIG_MMC_MSM_SDC1_8_BIT_SUPPORT is not set
CONFIG_MMC_MSM_SDC2_SUPPORT=y
# CONFIG_MMC_MSM_SDC2_8_BIT_SUPPORT is not set
# CONFIG_MMC_MSM_SDC3_SUPPORT is not set
# CONFIG_MMC_MSM_SDC3_POLLING is not set
# CONFIG_MMC_MSM_SDC4_SUPPORT is not set
# CONFIG_MMC_MSM_SDC5_SUPPORT is not set
CONFIG_MMC_MSM_SPS_SUPPORT=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_MSM_PDM is not set
# CONFIG_LEDS_PMIC_MPP is not set
# CONFIG_LEDS_MSM_TRICOLOR is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CPLD is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_QPNP is not set
# CONFIG_LEDS_MSM_GPIO_FLASH is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_MSM_PMIC is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_RENESAS_TPU is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_AN30259A=y
# CONFIG_LEDS_SEC_BACKLIGHT is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_MAX77804K=y
# CONFIG_LEDS_KTD2026 is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_SWITCH=y
# CONFIG_SWITCH_GPIO is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_RTC_DRV_CMOS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_MSM is not set
# CONFIG_RTC_DRV_MSM7X00A is not set
CONFIG_RTC_DRV_QPNP=y
# CONFIG_PM8926_BATTERY_CHECK_INTERRUPT is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_MSM_SHAREDMEM=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_USBIP_CORE is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6656 is not set
CONFIG_IIO=y
CONFIG_IIO_ST_HWMON=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_SW_RING is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16204 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
# CONFIG_KXSD9 is not set
# CONFIG_LIS3L02DQ is not set
# CONFIG_SCA3000 is not set
#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7606 is not set
# CONFIG_AD799X is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
# CONFIG_ADT7310 is not set
# CONFIG_ADT7410 is not set
# CONFIG_AD7280 is not set
# CONFIG_MAX1363 is not set
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7746 is not set
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD5686 is not set
# CONFIG_MAX517 is not set
#
# Direct Digital Synthesis
#
# CONFIG_AD5930 is not set
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
# CONFIG_AD9850 is not set
# CONFIG_AD9852 is not set
# CONFIG_AD9910 is not set
# CONFIG_AD9951 is not set
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16060 is not set
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_INV_MPU_IIO is not set
# CONFIG_INV_MPU_IIO_PRIMARY is not set
# CONFIG_INV_MPU_IIO_MPL is not set
# CONFIG_INPUT_MPU6500_SELFTEST is not set
# CONFIG_INV_SENSORS_IIO is not set
# CONFIG_INV_SENSORS_MPU65XX is not set
# CONFIG_INV_SENSORS_DMP is not set
# CONFIG_INV_SENSORS_DMP_K520S is not set
# CONFIG_INV_SENSORS_DBG is not set
# CONFIG_INV_SENSORS_DTS_SUPPORT is not set
#
# Light sensors
#
# CONFIG_SENSORS_GP2A_IIO is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set
#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
# CONFIG_ADE7754 is not set
# CONFIG_ADE7758 is not set
# CONFIG_ADE7759 is not set
# CONFIG_ADE7854 is not set
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set
#
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
# CONFIG_IIO_GPIO_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Grip sensors
#
# CONFIG_SENSORS_ASP01_IIO is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4_STAGING is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
CONFIG_ANDROID_LOGGER=y
CONFIG_LOGCAT_SIZE=512
CONFIG_ANDROID_PERSISTENT_RAM=y
CONFIG_ANDROID_RAM_CONSOLE=y
# CONFIG_PERSISTENT_TRACER is not set
CONFIG_ANDROID_TIMED_OUTPUT=y
CONFIG_ANDROID_TIMED_GPIO=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
linux-samsung-klte: base downstream kernel source on lineage-14.1 branch (!321) @drebrez originally based klte port on lineage-16.0 branch (Android 9), but we need compatibility with Android 7.1, so use lineage-14.1 branch. Also tidy up downstream kernel config a little bit (pass it through pmbootstrap kconfig edit, change nothing, exit with saving).
2019-04-17 07:43:26 +00:00
# CONFIG_SEC_OOM_KILLER is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_SEC_DEBUG_LMK_MEMINFO is not set
# CONFIG_SEC_DEBUG_LMK_COUNT_INFO is not set
# CONFIG_ANDROID_SWITCH is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_RUNTIME_COMPCACHE is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_SAMP_HOTNESS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_ANDROID_INTF_ALARM_DEV=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_PHONE is not set
# CONFIG_USB_WPAN_HCD is not set
#
# Qualcomm MSM specific device drivers
#
# CONFIG_MSM_SSBI is not set
CONFIG_SPS=y
CONFIG_USB_BAM=y
CONFIG_SPS_SUPPORT_BAMDMA=y
CONFIG_SPS_SUPPORT_NDP_BAM=y
CONFIG_QPNP_PWM=y
CONFIG_QPNP_POWER_ON=y
CONFIG_QPNP_CLKDIV=y
# CONFIG_QPNP_VIBRATOR is not set
CONFIG_QPNP_REVID=y
CONFIG_QPNP_COINCELL=y
# CONFIG_IPA is not set
CONFIG_MSM_AVTIMER=y
# CONFIG_PFT is not set
# CONFIG_SSM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
#
# Hardware Spinlock drivers
#
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_SS_VIBRATOR=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_MOTOR_DRV_MAX77804K=y
# CONFIG_MOTOR_DRV_ISA1400 is not set
# CONFIG_MOTOR_DRV_DRV2603 is not set
# CONFIG_MOTOR_ISA1000 is not set
# CONFIG_MSM_VIBRATOR is not set
# CONFIG_MAX77826_VIBRATOR is not set
# CONFIG_CONFIG_HAPTIC_ISA1200 is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_MSM_IOMMU=y
CONFIG_MSM_IOMMU_V1=y
# CONFIG_MSM_IOMMU_PMON is not set
CONFIG_IOMMU_PGTABLES_L2=y
CONFIG_MSM_IOMMU_VBIF_CHECK=y
# CONFIG_IOMMU_NON_SECURE is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_MSM_ADRENO_TZ=y
CONFIG_DEVFREQ_GOV_MSM_CPUFREQ=y
CONFIG_DEVFREQ_GOV_MSM_CPUBW_HWMON=y
#
# DEVFREQ Drivers
#
# CONFIG_CORESIGHT is not set
CONFIG_BIF=y
CONFIG_BIF_QPNP=y
CONFIG_BATTERY_SAMSUNG=y
CONFIG_BATTERY_SAMSUNG_DATA_FILE=""
# CONFIG_BATTERY_SAMSUNG_DATA is not set
# CONFIG_CHARGING_VZWCONCEPT is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_BATTERY_SWELLING=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_FUELGAUGE_DUMMY is not set
# CONFIG_FUELGAUGE_MAX17042 is not set
CONFIG_FUELGAUGE_MAX17048=y
# CONFIG_FUELGAUGE_MAX17050 is not set
# CONFIG_FUELGAUGE_MAX77823 is not set
# CONFIG_CHARGER_DUMMY is not set
# CONFIG_CHARGER_SMB328 is not set
# CONFIG_CHARGER_SMB358 is not set
# CONFIG_CHARGER_SMB1357 is not set
# CONFIG_CHARGER_BQ24157 is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24191 is not set
# CONFIG_CHARGER_BQ24260 is not set
# CONFIG_CHARGER_MAX77823 is not set
CONFIG_CHARGER_MAX77804K=y
# CONFIG_CHARGER_SM5414 is not set
CONFIG_SAMSUNG_LPM_MODE=y
# CONFIG_SAMSUNG_BATTERY_ENG_TEST is not set
# CONFIG_SAMSUNG_BATTERY_FACTORY is not set
# CONFIG_SAMSUNG_BATTERY_DISALLOW_DEEP_SLEEP is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_DISABLE_SAVE_CAPACITY_MAX is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_EN_OOPS is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_CONTROL_OTG_POPUP is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_SENSORS is not set
# CONFIG_SENSORS_BMI055 is not set
# CONFIG_SENSORS_BMI058 is not set
# CONFIG_SENSORS_AK8963C is not set
# CONFIG_SENSORS_AK09911C is not set
# CONFIG_SENSORS_CM3323 is not set
# CONFIG_SENSORS_CM36653 is not set
# CONFIG_SENSORS_CM36686 is not set
# CONFIG_SENSORS_CM36686_LEDA_EN_GPIO is not set
# CONFIG_SENSORS_GP2A030A is not set
# CONFIG_SENSORS_ADPD142 is not set
# CONFIG_SENSORS_TMD3782S is not set
# CONFIG_SENSORS_K2HH is not set
# CONFIG_SENSORS_SX9500 is not set
# CONFIG_SENSORS_GRIP_ADJDET is not set
# CONFIG_SENSORS_SX9500_REGULATOR_ONOFF is not set
# CONFIG_SENSORS_BMA254 is not set
# CONFIG_SENSORS_POWERCONTROL is not set
# CONFIG_SENSORS_GP2A_VDDCONTROL is not set
# CONFIG_BMA254_SMART_ALERT is not set
# CONFIG_SENSORS_GP2A002 is not set
# CONFIG_SENSORS_POWER_EN is not set
# CONFIG_SENSORS_K3DH is not set
# CONFIG_INPUT_MPU6500 is not set
# CONFIG_MPU6500_ADJUST_SMART_ALERT is not set
# CONFIG_INPUT_MPU6500_POLLING is not set
# CONFIG_SENSORS_TMD27723 is not set
# CONFIG_INPUT_YAS_SENSORS is not set
# CONFIG_SENSORS_BMA255 is not set
# CONFIG_SENSORS_CORE is not set
# CONFIG_SENSORS_HSCDTD008A is not set
# CONFIG_SENSORS_CM36651 is not set
CONFIG_SENSORS_MAX86900=y
# CONFIG_SENSORS_K303C is not set
# CONFIG_SENSORS_YAS532 is not set
CONFIG_INPUT_YAS_MAGNETOMETER_POSITION=0
#
# SEC_FPGA and IRDA FPGA
#
# CONFIG_SEC_FPGA is not set
# CONFIG_SENSORS_SSP_ATMEL is not set
CONFIG_SENSORS_SSP_STM=y
# CONFIG_SENSORS_SSP_STM_32F is not set
# CONFIG_SENSORS_SSP_STM_HESTIA is not set
CONFIG_SENSORS_SYSFS=y
CONFIG_SENSORS_SSP=y
# CONFIG_SENSORS_SSP_AK8963C is not set
# CONFIG_SENSORS_SSP_YAS532 is not set
CONFIG_SENSORS_SSP_ACCELEROMETER_POSITION=0
CONFIG_SENSORS_SSP_GYROSCOPE_POSITION=0
CONFIG_SENSORS_SSP_MAGNETOMETER_POSITION=0
CONFIG_SENSORS_SSP_SENSORHUB=y
CONFIG_SENSORS_SSP_FACTORY=y
# CONFIG_SENSORS_SSP_C12SD is not set
# CONFIG_SENSORS_SSP_LSM330 is not set
# CONFIG_SENSORS_SSP_CM36651 is not set
# CONFIG_SENSORS_SSP_CM3320 is not set
# CONFIG_SENSORS_SSP_MAX88920 is not set
CONFIG_SENSORS_SSP_MPU6500=y
CONFIG_SENSORS_SSP_BMP182=y
# CONFIG_SENSORS_SSP_AT32UC3L0128 is not set
CONFIG_SENSORS_SSP_ATUC128L5HAR=y
# CONFIG_SENSORS_SSP_SHTC1 is not set
CONFIG_SENSORS_SSP_AK09911=y
# CONFIG_SENSORS_AD7146 is not set
# CONFIG_SENSORS_SSP_BOUNCE_FIRMWARE is not set
# CONFIG_SENSORS_SSP_MAX88921 is not set
CONFIG_SENSORS_SSP_TMG399X=y
CONFIG_SENSORS_SSP_MOBEAM=y
# CONFIG_SENSORS_MLX90615 is not set
# CONFIG_SENSORS_BIO is not set
# CONFIG_SENSORS_SSP_TMD37823 is not set
# CONFIG_SENSORS_SSP_UVIS25 is not set
CONFIG_SENSORS_FINGERPRINT=y
CONFIG_SENSORS_FINGERPRINT_SYSFS=y
CONFIG_SENSORS_VFS61XX=y
CONFIG_SENSORS_VFS61XX_KO=y
# CONFIG_SENSORS_FPRINT_SECURE is not set
# CONFIG_ADSP_SENSORS_CORE is not set
# CONFIG_ADSP_FACTORY is not set
# CONFIG_MPU6500_FACTORY is not set
# CONFIG_MPU6515_FACTORY is not set
# CONFIG_HSCDTD008A_FACTORY is not set
# CONFIG_GP2AP30_FACTORY is not set
# CONFIG_BMA250_FACTORY is not set
# CONFIG_YAS532_FACTORY is not set
# CONFIG_FELICA is not set
# CONFIG_NFC_FELICA is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_FSA9485 is not set
# CONFIG_EXTCON_TSU6721 is not set
CONFIG_EXTCON_MAX77804K=y
# CONFIG_ADC_ONESHOT is not set
# CONFIG_MUIC_SUPPORT_AUDIO_DOCK is not set
# CONFIG_MUIC_SUPPORT_DESK_DOCK is not set
# CONFIG_MUIC_SUPPORT_SMART_DOCK is not set
# CONFIG_MUIC_SUPPORT_MMD_CTL is not set
# CONFIG_MUIC_SUPPORT_INCOMPATIBLE_CHARGER is not set
# CONFIG_MUIC_MAX77804K_SUPPORT_LANHUB is not set
# CONFIG_USBID_STANDARD is not set
#
# IRDA devices
#
# CONFIG_IR_REMOCON_MC96FR116 is not set
# CONFIG_IRDA_COMMON_LDO is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_ANDROID_FFF is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_MACH_BAFFIN2_SGLTE is not set
#
# File systems
#
CONFIG_LOW_ORDER_SEQ_MALLOC=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_OCFS2_FS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_AUTOFS4_FS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_GENERIC_ACL=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_VIRTUAL_XATTR=y
CONFIG_FAT_VIRTUAL_XATTR_SELINUX_LABEL="u:object_r:sdcard_external:s0"
CONFIG_FAT_SUPPORT_STLOG=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_VIRTUAL_XATTR=y
CONFIG_EXFAT_VIRTUAL_XATTR_SELINUX_LABEL="u:object_r:sdcard_external:s0"
CONFIG_EXFAT_SUPPORT_STLOG=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_NTFS_FS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_AVC is not set
CONFIG_PROC_STLOG=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_HUGETLB_PAGE is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CONFIGFS_FS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_WTL_ENCRYPTION_FILTER=y
CONFIG_ECRYPT_FS_VIRTUAL_FAT_XATTR=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_FORCE_DISABLE_FIPS is not set
CONFIG_SCFS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_SYSTEM_COMPRESSED is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_SCFS_LOWER_PAGECACHE_INVALIDATION=y
# CONFIG_SCFS_USE_CRYPTO is not set
CONFIG_SDCARD_FS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_NFS_FS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_CIFS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_DLM is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=6
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_HARDLOCKUP_DETECTOR_NMI is not set
# CONFIG_HARDLOCKUP_DETECTOR_OTHER_CPU is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SYSRQ_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_CPU_FREQ_SWITCH_PROFILER is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_DYNAMIC_DEBUG is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_PANIC_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
# CONFIG_FORCE_PAGES is not set
# CONFIG_FREE_PAGES_RDONLY is not set
# CONFIG_DEBUG_LL is not set
#
# Samsung Debugging Feature
#
CONFIG_SEC_DEBUG=y
CONFIG_SEC_DEBUG_SCHED_LOG=y
# CONFIG_SEC_DEBUG_SEMAPHORE_LOG is not set
# CONFIG_SEC_FILE_LEAK_DEBUG is not set
CONFIG_SEC_LOGGER_BUFFER_EXPANSION=y
CONFIG_SEC_LOGGER_BUFFER_EXPANSION_SIZE=2
# CONFIG_SEC_FORKHANG_DEBUG is not set
CONFIG_SEC_DEBUG_USER=y
CONFIG_SEC_DEBUG_IRQ_EXIT_LOG=y
# CONFIG_SEC_DEBUG_MSG_LOG is not set
CONFIG_SEC_DEBUG_SUBSYS=y
# CONFIG_SEC_DEBUG_DCVS_LOG is not set
# CONFIG_SEC_DEBUG_FUELGAUGE_LOG is not set
# CONFIG_SEC_DEBUG_LOW_LOG is not set
# CONFIG_SEC_DEBUG_MDM_FILE_INFO is not set
# CONFIG_SEC_DEBUG_DOUBLE_FREE is not set
CONFIG_SEC_LOG_LAST_KMSG=y
# CONFIG_SEC_DEBUG_NOCACHE_LOG_IN_LEVEL_LOW is not set
# CONFIG_SEC_MONITOR_BATTERY_REMOVAL is not set
#
# PowerManagement Feature
#
CONFIG_SEC_PM=y
CONFIG_SEC_PM_DEBUG=y
CONFIG_PID_IN_CONTEXTIDR=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
#
# Samsung Rooting Restriction Feature
#
# CONFIG_SEC_RESTRICT_ROOTING is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_RESTART_REASON_SEC_PARAM is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_RESTART_REASON_DDR is not set
#
# BSP Feature
#
CONFIG_SEC_BSP=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_LSM_MMAP_MIN_ADDR=32768
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_SECURITY_SELINUX=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_SEC_SELINUX is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
#
# ICCC
#
CONFIG_TZ_ICCC=y
# CONFIG_TZ_ICCC_DEBUG is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_INTEG_COPY_ADDRESS=0x8A008000
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CRYPTO_CRYPTD=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
*/linux-*: enable CONFIG_CRYPTO_XTS (MR 1405) Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using aes-xts-plain64 as default cipher for cryptsetup (override with "pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940). I have executed "pmbootstrap kconfig edit" on each kernel, and manually toggled the option. The diff is not always clean, because for some kernels it is apparently the first time, that menuconfig was executed on the configs like that. In a few instances, it turned out that CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is already a requirement, but as the config was incomplete, it was not visible that this option was enabled). Very few times, I had to enable CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS. It would be great if we could automate such mass kconfig edits in the future, see pmbootstrap#1942. [skip ci]: I have verified, that every single one of these kernels builds. CI will likely run out of time while downloading source tarballs.
2020-07-11 13:24:19 +00:00
CONFIG_CRYPTO_XTS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_ARM=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CRYPTO_SHA1_ARM_NEON=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CRYPTO_SHA512_ARM_NEON=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_ARM=y
linux-samsung-klte: base downstream kernel source on lineage-14.1 branch (!321) @drebrez originally based klte port on lineage-16.0 branch (Android 9), but we need compatibility with Android 7.1, so use lineage-14.1 branch. Also tidy up downstream kernel config a little bit (pass it through pmbootstrap kconfig edit, change nothing, exit with saving).
2019-04-17 07:43:26 +00:00
# CONFIG_CRYPTO_AES_ARM_BS is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
#
# Random Number Generation
#
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CRYPTO_DEV_QCE50=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_FIPS_ENABLE is not set
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_CRYPTO_DEV_QCRYPTO=y
CONFIG_CRYPTO_DEV_QCE=y
CONFIG_CRYPTO_DEV_QCEDEV=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_CRYPTO_DEV_OTA_CRYPTO is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
linux-samsung-klte: modernize, update sources (!94) Use latest sources from LineageOS, instead of the ones from andip71. The APKBUILD is modernized to use the devicepkg-dev but unfortunately compiling with gcc8 it doesn't boot. The kernel config is updated with the required options to start the lxc-android container and xf86-video-hwcomposer works (tested with xfce4). My plan was to add the firmware-samsung-klte with the subpackages for the wifi blobs and a precompiled android system.img to use with libhybris, but my device just died and I'm not able to power it on (I've probably burnt the Power IC 😢)
2018-12-04 00:35:27 +00:00
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
Add device Samsung Galaxy S5 (samsung-klte) (#1163)
2018-02-02 19:59:14 +00:00
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
CONFIG_QMI_ENCDEC=y
# CONFIG_QMI_ENCDEC_DEBUG is not set
Reference in a new issue Copy permalink