pmaports/temp/u-boot-goclever-gcta741l/sun6i-a31s-goclever-gcta741l.dts

// SPDX-License-Identifier: (GPL-2.0+ OR X11)
// Copyright 2021 Jacek Pruciak <linux@juniorjpdj.pl>

/dts-v1/;
#include "sun6i-a31s.dtsi"
#include "sun6i-reference-design-tablet.dtsi"
//#include <dt-bindings/pwm/pwm.h>

/ {
	model = "GoClever Orion 70L";
	compatible = "goclever,gcta741l", "allwinner,sun6i-a31s";
	
	panel {
		compatible = "hannstar,tqtm070cb501";
		power-supply = <&reg_dc1sw>;
		//backlight = <&backlight>;

		port {
			panel_input: endpoint {
				remote-endpoint = <&tcon0_out_lcd>;
			};
		};
	};
	
	// PWM not supported by sun6i at the moment
	//backlight {
	//	compatible = "pwm-backlight";
	//	pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
	//	brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
	//	default-brightness-level = <8>;
	//	enable-gpios = <&pio 0 25 GPIO_ACTIVE_HIGH>; /* PA25 */
	//};
};

&usb_otg {
	dr_mode = "otg";
};

&battery_power_supply {
	status = "okay";
};

&lradc {
	vref-supply = <&reg_aldo3>;
	status = "okay";

	button-1000 {
		label = "Home";
		linux,code = <KEY_HOMEPAGE>;
		channel = <0>;
		voltage = <1000000>;
	};
};

&i2c2 {
	status = "okay";

	accelerometer@4c {
		compatible = "fsl,mma7660";
		reg = <0x4c>;
		interrupt-parent = <&pio>;
		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */

		mount-matrix =	"0", "1", "0",
						"1", "0", "0",
						"0", "0", "1";
	};
};

&tcon0 {
	pinctrl-names = "default";
	pinctrl-0 = <&lcd0_rgb888_pins>;
	status = "okay";
};

&tcon0_out {
	tcon0_out_lcd: endpoint@0 {
		reg = <0>;
		remote-endpoint = <&panel_input>;
	};
};

&de {
	status = "okay";
};

&simplefb_lcd {
	status = "okay";
};

&codec {
	// This still doesn't work
	allwinner,audio-routing =
		/* sink, source */
		"Headphone", "HP",
		"Speaker", "LINEOUT",
		"MIC1", "Mic",
		"MIC2", "Headset Mic",
		"Mic",	"MBIAS",
		"Headset Mic", "HBIAS";
	allwinner,pa-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
	status = "okay";
};