forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-fairphone-fp2/APKBUILD

75 lines
2.3 KiB
Text
Raw Normal View History

Refresh Fairphone 2 packages
2018-08-23 18:40:19 +00:00
# Reference: <https://postmarketos.org/devicepkg>
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours
2020-04-25 09:51:42 +00:00
pkgname=device-fairphone-fp2
Fairphone 2 support (#602) * Started with stock kernel config (fairphone-perf_defconfig) * Enabled DEVTMPFS * Deactivated MSM_KGSL * Enabled the serial console * Enabled USB networking
2017-09-21 17:21:21 +00:00
pkgdesc="Fairphone 2"
Refresh Fairphone 2 packages
2018-08-23 18:40:19 +00:00
pkgver=2
modem/msm-modem: rename msm-modem-mainline to msm-modem-rpmsg (MR 1356) Newer Qualcomm SoCs (e.g. SDM845. MSM8953) seem to use a different method to talk to the modem. There are no longer separate rpmsg/SMD channels for QMI messags, instead the modem is also available through QRTR. On these newer SoCs, installing msm-modem-mainline is pointless, because the created /dev/modem device will not actually allow communicating with the modem. However, you still need the part from the base package (msm-modem), which installs+enables rmtfs. To avoid confusion, rename the msm-modem-mainline subpackage to msm-modem-rpmsg. Install only "msm-modem" on SDM845 because that likely does not allow communication with the modem through RPMSG anyway.
2020-06-21 13:07:32 +00:00
pkgrel=13
Remove github.com references * Travis and Coveralls badges * aports: instead of <https://github.com/postmarketOS>, use <https://postmarketos.org> * References to full URLs to issues and pull requests replaced with a hash and the number * grsec check: simplify error message, remove link to github issue (nobody is using that anymore anyway)
2018-06-30 07:00:48 +00:00
url="https://postmarketos.org"
Fairphone 2 support (#602) * Started with stock kernel config (fairphone-perf_defconfig) * Enabled DEVTMPFS * Deactivated MSM_KGSL * Enabled the serial console * Enabled USB networking
2017-09-21 17:21:21 +00:00
license="MIT"
fairphone-fp2: switch to armv7 (!273) [ci:skip-build]: already built successfully
2019-02-13 18:54:14 +00:00
arch="armv7"
device-*: don't use noarch anymore Use the device's architecture instead of noarch. Because the device packages should never be built for other architectures, even if all depends can be built for other arches as well. This simplifies package building as part of the new build infrastructure effort. pmbootstrap has also been changed to output this by default in aportgen.
2018-11-07 06:45:58 +00:00
options="!check !archcheck"
fairphone-fp2: reorganize dependencies (again), add mainline subpackage (!692) Remove all firmware-support dependencies from the firmware package and add them to -downstream-firmware and -mainline-firmware packages which have an install_if on the downstream or mainline kernel subpackage. [ci:skip-build]: already built successfully in CI
2019-10-19 19:57:59 +00:00
depends="postmarketos-base mkbootimg"
Refresh Fairphone 2 packages
2018-08-23 18:40:19 +00:00
makedepends="devicepkg-dev"
Initial audio support on FP2
2018-10-10 07:30:21 +00:00
source="deviceinfo
FP2.conf
hifi"
fairphone-fp2: reorganize dependencies (again), add mainline subpackage (!692) Remove all firmware-support dependencies from the firmware package and add them to -downstream-firmware and -mainline-firmware packages which have an install_if on the downstream or mainline kernel subpackage. [ci:skip-build]: already built successfully in CI
2019-10-19 19:57:59 +00:00
subpackages="
$pkgname-kernel-downstream:kernel_downstream
$pkgname-kernel-mainline:kernel_mainline
$pkgname-nonfree-firmware:nonfree_firmware
$pkgname-downstream-firmware:downstream_firmware
$pkgname-mainline-firmware:mainline_firmware
$pkgname-alsa
"
Refresh Fairphone 2 packages
2018-08-23 18:40:19 +00:00
build() {
devicepkg_build $startdir $pkgname
}
Fairphone 2 support (#602) * Started with stock kernel config (fairphone-perf_defconfig) * Enabled DEVTMPFS * Deactivated MSM_KGSL * Enabled the serial console * Enabled USB networking
2017-09-21 17:21:21 +00:00
package() {
Refresh Fairphone 2 packages
2018-08-23 18:40:19 +00:00
devicepkg_package $startdir $pkgname
Fairphone 2 support (#602) * Started with stock kernel config (fairphone-perf_defconfig) * Enabled DEVTMPFS * Deactivated MSM_KGSL * Enabled the serial console * Enabled USB networking
2017-09-21 17:21:21 +00:00
}
fairphone-fp2: reorganize dependencies (again), add mainline subpackage (!692) Remove all firmware-support dependencies from the firmware package and add them to -downstream-firmware and -mainline-firmware packages which have an install_if on the downstream or mainline kernel subpackage. [ci:skip-build]: already built successfully in CI
2019-10-19 19:57:59 +00:00
kernel_downstream() {
pkgdesc="Downstream kernel"
depends="linux-fairphone-fp2 mesa-dri-swrast ofono"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
kernel_mainline() {
pkgdesc="Mainline kernel"
depends="linux-postmarketos-qcom-msm8974 mesa-dri-freedreno"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
Add nonfree-firmware subpackage for fp2 (#1261) Also removes linux-firmware from device package as it was probably never used.
2018-02-26 20:53:22 +00:00
nonfree_firmware() {
Initial audio support on FP2
2018-10-10 07:30:21 +00:00
pkgdesc="Firmware for WiFi, Audio, etc."
fairphone-fp2: reorganize dependencies (again), add mainline subpackage (!692) Remove all firmware-support dependencies from the firmware package and add them to -downstream-firmware and -mainline-firmware packages which have an install_if on the downstream or mainline kernel subpackage. [ci:skip-build]: already built successfully in CI
2019-10-19 19:57:59 +00:00
depends="firmware-fairphone-fp2-adsp firmware-fairphone-fp2-modem firmware-fairphone-fp2-wcnss"
mkdir "$subpkgdir"
}
downstream_firmware() {
pkgdesc="Firmware support packages for downstream kernel"
modem/modem-qcom-msm-{mainline,downstream}: combine to msm-modem (!1032) Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD with mainline and downstream subpackages. Enable rmtfs service here instead of directly in the package. [ci:skip-vercheck]: for qrtr version fix
2020-03-08 19:26:46 +00:00
depends="$pkgname-alsa adsp-audio msm-modem-downstream wcnss-wlan"
fairphone-fp2: reorganize dependencies (again), add mainline subpackage (!692) Remove all firmware-support dependencies from the firmware package and add them to -downstream-firmware and -mainline-firmware packages which have an install_if on the downstream or mainline kernel subpackage. [ci:skip-build]: already built successfully in CI
2019-10-19 19:57:59 +00:00
install_if="$pkgname-kernel-downstream $pkgname-nonfree-firmware"
mkdir "$subpkgdir"
}
mainline_firmware() {
pkgdesc="Firmware support packages for mainline kernel"
modem/msm-modem: rename msm-modem-mainline to msm-modem-rpmsg (MR 1356) Newer Qualcomm SoCs (e.g. SDM845. MSM8953) seem to use a different method to talk to the modem. There are no longer separate rpmsg/SMD channels for QMI messags, instead the modem is also available through QRTR. On these newer SoCs, installing msm-modem-mainline is pointless, because the created /dev/modem device will not actually allow communicating with the modem. However, you still need the part from the base package (msm-modem), which installs+enables rmtfs. To avoid confusion, rename the msm-modem-mainline subpackage to msm-modem-rpmsg. Install only "msm-modem" on SDM845 because that likely does not allow communication with the modem through RPMSG anyway.
2020-06-21 13:07:32 +00:00
depends="msm-modem-rpmsg firmware-adreno"
fairphone-fp2: reorganize dependencies (again), add mainline subpackage (!692) Remove all firmware-support dependencies from the firmware package and add them to -downstream-firmware and -mainline-firmware packages which have an install_if on the downstream or mainline kernel subpackage. [ci:skip-build]: already built successfully in CI
2019-10-19 19:57:59 +00:00
install_if="$pkgname-kernel-mainline $pkgname-nonfree-firmware"
Add nonfree-firmware subpackage for fp2 (#1261) Also removes linux-firmware from device package as it was probably never used.
2018-02-26 20:53:22 +00:00
mkdir "$subpkgdir"
}
Initial audio support on FP2
2018-10-10 07:30:21 +00:00
alsa() {
fairphone-fp2: reorganize dependencies, install modem firmware by default (!686) The modem boots up properly without causing any problems, so let's install the firmware and support packages by default. Also install adsp-audio now by default to boot up the adsp for audio and other services provided by the processor. [ci:skip-build]: already built successfully in CI
2019-10-15 18:17:39 +00:00
pkgdesc="Audio configuration files"
Initial audio support on FP2
2018-10-10 07:30:21 +00:00
mkdir -p "$subpkgdir"/usr/share/alsa/ucm/FP2
install -Dm644 "$srcdir"/FP2.conf "$subpkgdir"/usr/share/alsa/ucm/FP2/
install -Dm644 "$srcdir"/hifi "$subpkgdir"/usr/share/alsa/ucm/FP2/
}
device/*: Add deviceinfo_chassis variable (MR 1246) [ci:ignore-count], [ci:skip-build]
2020-05-17 13:33:49 +00:00
sha512sums="af14d0dbe3c04d0eea28028e4051b9f63239dda9476e4667bd00be0bec57768e3da76d7ca188b319d4012ae932078d994a219f5bec074fa5f21f1e7059d5befc deviceinfo
Initial audio support on FP2
2018-10-10 07:30:21 +00:00
55360b1ba4ddadea341c9edb13c32ba5f19aabf75ab28602f30cfb79b9df8834f115ef979c70569f23ec1293b1fcd408baf320d87803293ce7106bdc73a26c9f FP2.conf
b834461c6866bb0c473dd089dd5da641dd42a00f610aad6503117aa50fe6e200db9ad0a264bb609f12350d59faee1f772907bacd75439f702ea7d52f6f85e2b1 hifi"
Reference in a new issue Copy permalink