pmaports/device/testing/device-samsung-golden/APKBUILD

# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-golden
pkgdesc="Samsung Galaxy S III mini"
pkgver=1
pkgrel=15
url="https://postmarketos.org"
license="MIT"
arch="armv7"
options="!check !archcheck"
depends="postmarketos-base mkbootimg"
makedepends="devicepkg-dev"
subpackages="
	$pkgname-kernel-downstream:kernel_downstream
	$pkgname-kernel-mainline:kernel_mainline
	$pkgname-nonfree-firmware:nonfree_firmware
	$pkgname-kwin
"
source="
	deviceinfo
	kwin.sh
	downstream/init-usb-hook.sh
	downstream/modules-load-wifi.conf
	downstream/module-config.conf
"

build() {
	devicepkg_build $startdir $pkgname
}

package() {
	devicepkg_package $startdir $pkgname
}

kernel_downstream() {
	pkgdesc="Downstream kernel"
	depends="linux-samsung-golden"
	devicepkg_subpackage_kernel $startdir $pkgname $subpkgname

	# USB
	install -Dm644 "$srcdir"/init-usb-hook.sh \
		"$subpkgdir"/usr/share/mkinitfs/hooks/00-init_usb.sh

	# WiFi kernel module configuration
	install -Dm644 "$srcdir"/modules-load-wifi.conf \
		"$subpkgdir"/etc/modules-load.d/00-load-wifi.conf
	install -Dm644 "$srcdir"/module-config.conf \
		"$subpkgdir"/etc/modprobe.d/00-module-config.conf
}

kernel_mainline() {
	pkgdesc="Close to mainline kernel"
	depends="linux-postmarketos-stericsson"
	devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}

nonfree_firmware() {
	pkgdesc="WiFi/BT firmware"
	depends="firmware-samsung-u8500"
	mkdir "$subpkgdir"
}

kwin() {
	install_if="$pkgname-kernel-mainline kwin"
	install -Dm644 "$srcdir"/kwin.sh "$subpkgdir"/etc/profile.d/kwin.sh
}

sha512sums="
9c5329c37d0dfd7ff34e22c5346429692d1b8b700b84ed8ac1934f62ca54495db7200506bde5a66f1543bfb3fa10a6c5cb53a1590067d6eda01b94d666fb3bc0  deviceinfo
685ec71484a932c59f83f1039d4d18a010a5849342e96d9e15ae8ce64374aac15073f9c51d7d9f270c60e70d2ea15c685b8f528cdc40f991b093b9227cba6a48  kwin.sh
769f76b2b0dc5279c514181f6cc915c045562df0c1fe08c54b6588d11ff2c75441a3a4f78d6dde669c82e1c572a66bdde475da3e289d334e3255fcf15430c044  init-usb-hook.sh
61e8becbf6fa7c1c6c42e481083f5981ae7af33a48cbc53e817d8ac2c6a8e4f67a54b32ae3b8f5f25f7b412165a849dc93a629110dc47b0d16927bf2a12eb7e1  modules-load-wifi.conf
436900f627e4ec7e8359bfa6b5d0ac98c69cdd3f3b5e68d23354fa87d79beef866afd6c4cf27b97e9b608cce44fe8d116594f3b08520c9c05624bcf58b61c7f1  module-config.conf
"
Device samsung i8190 (Galaxy SIII mini) (#1428) Working: Display, Touch, USB networking, FDE 2018-04-21 14:55:39 +00:00			`# Reference: <https://postmarketos.org/devicepkg>`
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours 2020-04-25 09:51:42 +00:00			`pkgname=device-samsung-golden`
device-samsung-golden: add mainline kernel (!833) 2019-12-12 22:07:40 +00:00			`pkgdesc="Samsung Galaxy S III mini"`
device-samsung-golden: use U-Boot Fastboot interface instead of Heimdall (!833) 2019-08-23 14:36:47 +00:00			`pkgver=1`
device-samsung-golden: support new mkintifs paths (MR 3895) 2023-02-18 23:12:21 +00:00			`pkgrel=15`
Device samsung i8190 (Galaxy SIII mini) (#1428) Working: Display, Touch, USB networking, FDE 2018-04-21 14:55:39 +00:00			`url="https://postmarketos.org"`
			`license="MIT"`
samsung-i8190: change to armv7 (!719) 2019-11-03 18:54:55 +00:00			`arch="armv7"`
device-*: don't use noarch anymore Use the device's architecture instead of noarch. Because the device packages should never be built for other architectures, even if all depends can be built for other arches as well. This simplifies package building as part of the new build infrastructure effort. pmbootstrap has also been changed to output this by default in aportgen. 2018-11-07 06:45:58 +00:00			`options="!check !archcheck"`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`depends="postmarketos-base mkbootimg"`
Device samsung i8190 (Galaxy SIII mini) (#1428) Working: Display, Touch, USB networking, FDE 2018-04-21 14:55:39 +00:00			`makedepends="devicepkg-dev"`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`subpackages="`
			`$pkgname-kernel-downstream:kernel_downstream`
device-samsung-golden: add mainline kernel (!833) 2019-12-12 22:07:40 +00:00			`$pkgname-kernel-mainline:kernel_mainline`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`$pkgname-nonfree-firmware:nonfree_firmware`
samsung-skomer: new device (Samsung Galaxy Xcover 2) (MR 1424) Move kwin.sh to extra subpackage in samsung-golden. 2020-06-21 12:35:57 +00:00			`$pkgname-kwin`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`"`
Device samsung i8190 (Galaxy SIII mini) (#1428) Working: Display, Touch, USB networking, FDE 2018-04-21 14:55:39 +00:00			`source="`
Samsung-i8190 wifi now working (#1440) Guide for connecting to wlan is on the wiki page for the device, wifi chip is BCM4334. Wlan interfaces are wlan0 and p2p0. Connection seems stable, was able to install some packages. 2018-05-05 19:44:34 +00:00			`deviceinfo`
device-samsung-golden: add mainline kernel (!833) 2019-12-12 22:07:40 +00:00			`kwin.sh`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`downstream/init-usb-hook.sh`
device-*: remove redundant installation of modules-load.conf/modprobe.conf (!1124) This is now automatically installed in devicepkg_package. [ci:ignore-count]: this should build fine in CI. 2020-04-04 14:07:49 +00:00			`downstream/modules-load-wifi.conf`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`downstream/module-config.conf`
Device samsung i8190 (Galaxy SIII mini) (#1428) Working: Display, Touch, USB networking, FDE 2018-04-21 14:55:39 +00:00			`"`

			`build() {`
			`devicepkg_build $startdir $pkgname`
			`}`

			`package() {`
			`devicepkg_package $startdir $pkgname`
			`}`

device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`kernel_downstream() {`
			`pkgdesc="Downstream kernel"`
device: drop depend on mesa-dri-gallium (MR 3478) This is now installed by postmarketos-base when appropriate. 2022-10-10 19:33:44 +00:00			`depends="linux-samsung-golden"`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`devicepkg_subpackage_kernel $startdir $pkgname $subpkgname`
device-samsung-golden: use U-Boot Fastboot interface instead of Heimdall (!833) 2019-08-23 14:36:47 +00:00
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`# USB`
			`install -Dm644 "$srcdir"/init-usb-hook.sh \`
device-samsung-golden: support new mkintifs paths (MR 3895) 2023-02-18 23:12:21 +00:00			`"$subpkgdir"/usr/share/mkinitfs/hooks/00-init_usb.sh`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00
			`# WiFi kernel module configuration`
device-*: remove redundant installation of modules-load.conf/modprobe.conf (!1124) This is now automatically installed in devicepkg_package. [ci:ignore-count]: this should build fine in CI. 2020-04-04 14:07:49 +00:00			`install -Dm644 "$srcdir"/modules-load-wifi.conf \`
Samsung-i8190 wifi now working (#1440) Guide for connecting to wlan is on the wiki page for the device, wifi chip is BCM4334. Wlan interfaces are wlan0 and p2p0. Connection seems stable, was able to install some packages. 2018-05-05 19:44:34 +00:00			`"$subpkgdir"/etc/modules-load.d/00-load-wifi.conf`
			`install -Dm644 "$srcdir"/module-config.conf \`
			`"$subpkgdir"/etc/modprobe.d/00-module-config.conf`
			`}`

device-samsung-golden: add mainline kernel (!833) 2019-12-12 22:07:40 +00:00			`kernel_mainline() {`
device/*: clarify "close to mainline" (cosmetic) (MR 1408) Make it clear, that these kernels are not mainline, but "close to mainline". [ci:skip-build] [ci:skip-vercheck]: just changing pkgdesc Related: https://wiki.postmarketos.org/wiki/(Close_to)_Mainline 2020-07-11 09:16:39 +00:00			`pkgdesc="Close to mainline kernel"`
device: drop depend on mesa-dri-gallium (MR 3478) This is now installed by postmarketos-base when appropriate. 2022-10-10 19:33:44 +00:00			`depends="linux-postmarketos-stericsson"`
device-samsung-golden: add mainline kernel (!833) 2019-12-12 22:07:40 +00:00			`devicepkg_subpackage_kernel $startdir $pkgname $subpkgname`
			`}`

device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`nonfree_firmware() {`
			`pkgdesc="WiFi/BT firmware"`
firmware/firmware-samsung-u8500: rename from firmware-samsung-golden (MR 1424) samsung-skomer basically uses the same BCM4334 WiFi/BT chip as samsung-golden, and the WiFi/BT firmware is also the same. There seems to be a slightly different NVRAM file, so we package that just to do things properly. 2020-06-21 12:31:50 +00:00			`depends="firmware-samsung-u8500"`
device-samsung-golden: split downstream kernel into separate package (!833) Prepare for mainline by moving the downstream-specific files into a separate downstream package. 2019-12-12 21:09:59 +00:00			`mkdir "$subpkgdir"`
			`}`

samsung-skomer: new device (Samsung Galaxy Xcover 2) (MR 1424) Move kwin.sh to extra subpackage in samsung-golden. 2020-06-21 12:35:57 +00:00			`kwin() {`
			`install_if="$pkgname-kernel-mainline kwin"`
			`install -Dm644 "$srcdir"/kwin.sh "$subpkgdir"/etc/profile.d/kwin.sh`
			`}`

device/: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui- packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify) 2021-07-07 05:06:17 +00:00			`sha512sums="`
device/*: remove empty variables (MR 2534) [ci:ignore-count] [ci:skip-vercheck] [ci:skip-build]: built all the device packages successfully in CI already 2021-09-18 17:06:03 +00:00			`9c5329c37d0dfd7ff34e22c5346429692d1b8b700b84ed8ac1934f62ca54495db7200506bde5a66f1543bfb3fa10a6c5cb53a1590067d6eda01b94d666fb3bc0 deviceinfo`
device-samsung-golden: add mainline kernel (!833) 2019-12-12 22:07:40 +00:00			`685ec71484a932c59f83f1039d4d18a010a5849342e96d9e15ae8ce64374aac15073f9c51d7d9f270c60e70d2ea15c685b8f528cdc40f991b093b9227cba6a48 kwin.sh`
Samsung-i8190 wifi now working (#1440) Guide for connecting to wlan is on the wiki page for the device, wifi chip is BCM4334. Wlan interfaces are wlan0 and p2p0. Connection seems stable, was able to install some packages. 2018-05-05 19:44:34 +00:00			`769f76b2b0dc5279c514181f6cc915c045562df0c1fe08c54b6588d11ff2c75441a3a4f78d6dde669c82e1c572a66bdde475da3e289d334e3255fcf15430c044 init-usb-hook.sh`
device-*: remove redundant installation of modules-load.conf/modprobe.conf (!1124) This is now automatically installed in devicepkg_package. [ci:ignore-count]: this should build fine in CI. 2020-04-04 14:07:49 +00:00			`61e8becbf6fa7c1c6c42e481083f5981ae7af33a48cbc53e817d8ac2c6a8e4f67a54b32ae3b8f5f25f7b412165a849dc93a629110dc47b0d16927bf2a12eb7e1 modules-load-wifi.conf`
device/: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui- packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify) 2021-07-07 05:06:17 +00:00			`436900f627e4ec7e8359bfa6b5d0ac98c69cdd3f3b5e68d23354fa87d79beef866afd6c4cf27b97e9b608cce44fe8d116594f3b08520c9c05624bcf58b61c7f1 module-config.conf`
			`"`