forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-huawei-g7/deviceinfo

34 lines
1.1 KiB
Text
Raw Permalink Normal View History

huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
# Reference: <https://postmarketos.org/deviceinfo>
# Please use double quotes only. You can source this file in shell scripts.
deviceinfo_format_version="0"
deviceinfo_name="Huawei Ascend G7"
deviceinfo_manufacturer="Huawei"
deviceinfo_codename="huawei-g7"
deviceinfo_year="2014"
deviceinfo_dtb="qcom/msm8916-huawei-g7"
deviceinfo_append_dtb="true"
deviceinfo_arch="aarch64"
# Device related
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
deviceinfo_gpu_accelerated="true"
huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
deviceinfo_chassis="handset"
deviceinfo_keyboard="false"
deviceinfo_external_storage="true"
deviceinfo_screen_width="720"
deviceinfo_screen_height="1280"
deviceinfo_getty="ttyMSM0;115200"
# Bootloader related
deviceinfo_flash_method="fastboot"
treewide: drop PMOS_NO_OUTPUT_REDIRECT (MR 5240) This cmdline argument is now a no-op. Drop it everywhere and add a new CI check to enforce this. Adjust the deprecated "minimal" initramfs variant to use pmos.debug-shell to enable logging instead. It doesn't /support/ dropping to a shell, so the variable takes on a different meaning. But that's ok since it's at least more consistent. [ci:ignore-count] [ci:skip-vercheck] Signed-off-by: Caleb Connolly <caleb@postmarketos.org> Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org> [ci:skip-build]: kernel builds are very likely to go through now
2024-06-18 19:53:59 +00:00
deviceinfo_kernel_cmdline="earlycon console=ttyMSM0,115200"
huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
deviceinfo_generate_bootimg="true"
device/msm8916*: Generate extlinux.conf (MR 4826) Now as boot-deploy allows us to generate both boot.img and extlinux.conf at the same time, enable generating the config for all msm8916 since it will be used in the future lk2nd release. boot.img is still kept to keep compatibility with current lk2nd releases and to allow system recovery with fastboot when required. [ci:skip-build] already built successfully in CI [ci:ignore-count]
2024-02-15 08:21:05 +00:00
deviceinfo_generate_extlinux_config="true"
huawei-g7: new device (Huawei Ascend G7) (MR 2287) The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel. Initially supported features: - USB - Storage (eMMC, SD card) - Display - Touchscreen, Buttons, Vibrator - Notification LED - WiFi/Bluetooth - Accelerometer, Magnetometer, Proximity - Audio - NFC The modem needs more work to work around strange Huawei firmware mess. Note that the Huawei shipped an outdated firmware version that does not support booting aarch64 kernels (like used in this device port). However, the device does not verify firmware signatures so it is possible to flash firmware from other devices. This is mostly described in the wiki, but unfortunately it's quite complex. However, the aarch64 version of linux-postmarketos-qcom-msm8916 receives much more testing so I would like to avoid adding more armv7 MSM8916 devices unless absolutely necessary. For pointercal: Screen dimension 720x1280 Touchscreen dimension (reported by evtest) 1100x1900 720/1100*65536 = ~42896 1280/1900*65536 = ~44151 Offset doesn't seem to be needed. [ci:skip-build] already built successfully in CI
2021-04-21 13:42:05 +00:00
deviceinfo_flash_offset_base="0x80000000"
deviceinfo_flash_offset_kernel="0x00080000"
deviceinfo_flash_offset_ramdisk="0x02000000"
deviceinfo_flash_offset_second="0x00f00000"
deviceinfo_flash_offset_tags="0x01e00000"
deviceinfo_flash_pagesize="2048"
deviceinfo_flash_sparse="true"
Reference in a new issue Copy permalink