forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/device-lenovo-a6010/APKBUILD

53 lines
1.7 KiB
Text
Raw Permalink Normal View History

lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
# Reference: <https://postmarketos.org/devicepkg>
lenovo-a6010: add maintainers (MR 2577)
2021-10-07 12:40:11 +00:00
# Maintainer: Jenneron <jenneron@protonmail.com>
# Co-Maintainer: Minecrell <minecrell@minecrell.net>
lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
pkgname=device-lenovo-a6010
pkgdesc="Lenovo A6010"
device/msm8916*: Generate extlinux.conf (MR 4826) Now as boot-deploy allows us to generate both boot.img and extlinux.conf at the same time, enable generating the config for all msm8916 since it will be used in the future lk2nd release. boot.img is still kept to keep compatibility with current lk2nd releases and to allow system recovery with fastboot when required. [ci:skip-build] already built successfully in CI [ci:ignore-count]
2024-02-15 08:21:05 +00:00
pkgver=8
treewide: drop PMOS_NO_OUTPUT_REDIRECT (MR 5240) This cmdline argument is now a no-op. Drop it everywhere and add a new CI check to enforce this. Adjust the deprecated "minimal" initramfs variant to use pmos.debug-shell to enable logging instead. It doesn't /support/ dropping to a shell, so the variable takes on a different meaning. But that's ok since it's at least more consistent. [ci:ignore-count] [ci:skip-vercheck] Signed-off-by: Caleb Connolly <caleb@postmarketos.org> Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org> [ci:skip-build]: kernel builds are very likely to go through now
2024-06-18 19:53:59 +00:00
pkgrel=1
lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
url="https://postmarketos.org"
license="MIT"
arch="aarch64"
options="!check !archcheck"
community/<msm8916>: use _pmb_select="..." instead of kernel variants (MR 2632)
2021-10-24 12:48:45 +00:00
depends="postmarketos-base mkbootimg linux-postmarketos-qcom-msm8916
soc-qcom-msm8916 soc-qcom-msm8916-rproc"
lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
makedepends="devicepkg-dev"
device/*: transform deviceinfo_modules_initfs into a file (MR 4169) The file is automatically packed by devicepkg-dev utils Relates #1836
2023-08-02 17:06:01 +00:00
source="deviceinfo modules-initfs phoc.ini"
lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
subpackages="
$pkgname-nonfree-firmware:nonfree_firmware
lenovo-a6010: add phosh config (MR 2577) I'm not sure it is possible to connect a second display to this phone through P2P WiFi, so mapping cursor to DSI-1 just in case. It is needed for screen rotation when a second display is connected. Reduce scaling factor from default 2 to 1.8.
2021-10-07 12:37:55 +00:00
$pkgname-phosh
lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
"
community/<msm8916>: use _pmb_select="..." instead of kernel variants (MR 2632)
2021-10-24 12:48:45 +00:00
_pmb_select="soc-qcom-msm8916-rproc"
# Backwards compatibility for old kernel variant subpackages
replaces="$pkgname-kernel-mainline $pkgname-kernel-mainline-modem"
for pkg in $replaces; do provides="$provides $pkg=$pkgver-r$pkgrel"; done
lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
}
nonfree_firmware() {
<msm8916-secure boot+modem>: use separate firmware packages (MR 2619) Rule A: Devices without secure boot need: 1. GPU firmware (firmware-qcom-adreno-a300) 2. msm-firmware-loader (for modem) 3. firmware-qcom-msm8916-wcnss: more recent wcnss firmware 4. device-specific -wcnss-nv firmware 5. firmware-qcom-msm8916-venus: some packaged venus firmware
2021-10-19 08:28:29 +00:00
pkgdesc="GPU/WiFi/BT/Modem/Video firmware"
depends="firmware-qcom-adreno-a300 msm-firmware-loader
firmware-qcom-msm8916-wcnss firmware-lenovo-a6010-wcnss-nv
firmware-qcom-msm8916-venus"
lenovo-a6010: new device (MR 1748)
2020-11-21 19:00:53 +00:00
mkdir "$subpkgdir"
}
lenovo-a6010: add phosh config (MR 2577) I'm not sure it is possible to connect a second display to this phone through P2P WiFi, so mapping cursor to DSI-1 just in case. It is needed for screen rotation when a second display is connected. Reduce scaling factor from default 2 to 1.8.
2021-10-07 12:37:55 +00:00
phosh() {
install_if="$pkgname=$pkgver-r$pkgrel postmarketos-ui-phosh"
device-*: rootston.ini -> phoc.ini (MR 3054) rootston.ini is an old, deprecated name. [ci:ignore-count]
2022-04-03 09:04:48 +00:00
install -Dm644 "$srcdir"/phoc.ini \
"$subpkgdir"/etc/phosh/phoc.ini
lenovo-a6010: add phosh config (MR 2577) I'm not sure it is possible to connect a second display to this phone through P2P WiFi, so mapping cursor to DSI-1 just in case. It is needed for screen rotation when a second display is connected. Reduce scaling factor from default 2 to 1.8.
2021-10-07 12:37:55 +00:00
}
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
sha512sums="
treewide: drop PMOS_NO_OUTPUT_REDIRECT (MR 5240) This cmdline argument is now a no-op. Drop it everywhere and add a new CI check to enforce this. Adjust the deprecated "minimal" initramfs variant to use pmos.debug-shell to enable logging instead. It doesn't /support/ dropping to a shell, so the variable takes on a different meaning. But that's ok since it's at least more consistent. [ci:ignore-count] [ci:skip-vercheck] Signed-off-by: Caleb Connolly <caleb@postmarketos.org> Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org> [ci:skip-build]: kernel builds are very likely to go through now
2024-06-18 19:53:59 +00:00
f367b90ebbf89896884d3cc34c559cc3d36b6e4187aeb52497c23b0cb133c25163751d0013aa37109a441c76339f13de829fc01ff9537dc9fcdf53ae0066bd24 deviceinfo
device/*: transform deviceinfo_modules_initfs into a file (MR 4169) The file is automatically packed by devicepkg-dev utils Relates #1836
2023-08-02 17:06:01 +00:00
258464e46872cf221f7ac367766f9b8ead5d5dccbd71f3df5a5555127a42448906247ff2519d1750eec53b3ed37ae96c2409369d7cb8e2fffeb202a8f69bba53 modules-initfs
device/*: fix phosh startup due to new config syntax (MR 3117) [ci:ignore-count]
2022-05-05 14:50:55 +00:00
10d4ee62e5f7a9e4c368c460dd4c3ef282476e47d8cc40e4e3b83e971d04c493b801e5628ebdfe721f869e2fd68c521cf192cba1a973c8e03a61445534a28811 phoc.ini
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
"
Reference in a new issue Copy permalink