linux-uconsole/drivers/usb
Felipe F. Tonello 5709321fd9 usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize
commit 03d27ade49 upstream.

buflen by default (256) is smaller than wMaxPacketSize (512) in high-speed
devices.

That caused the OUT endpoint to freeze if the host send any data packet of
length greater than 256 bytes.

This is an example dump of what happended on that enpoint:
HOST:   [DATA][Length=260][...]
DEVICE: [NAK]
HOST:   [PING]
DEVICE: [NAK]
HOST:   [PING]
DEVICE: [NAK]
...
HOST:   [PING]
DEVICE: [NAK]

This patch fixes this problem by setting the minimum usb_request's buffer size
for the OUT endpoint as its wMaxPacketSize.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-02 21:19:50 -07:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea Revert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA" 2017-02-26 11:07:51 +01:00
class USB: usbtmc: add missing endpoint sanity check 2017-03-30 09:35:19 +02:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core usb: hub: Wait for connection to be reestablished after port reset 2017-04-18 07:14:37 +02:00
dwc2 usb: dwc2: fix regression on big-endian PowerPC/ARM systems 2016-07-27 09:47:28 -07:00
dwc3 usb: dwc3: gadget: delay unmap of bounced requests 2017-04-18 07:14:35 +02:00
early
gadget usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize 2017-05-02 21:19:50 -07:00
host usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers 2017-03-18 19:09:57 +08:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc USB: idmouse: fix NULL-deref at probe 2017-03-30 09:35:17 +02:00
mon USB: mon_stat.c: move assignment out of if () block 2015-05-10 16:01:11 +02:00
musb usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer 2017-03-30 09:35:17 +02:00
phy USB: phy: am335x-control: fix device and of_node leaks 2017-01-12 11:22:47 +01:00
renesas_usbhs usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition 2016-09-24 10:07:39 +02:00
serial USB: serial: qcserial: add Dell DW5811e 2017-03-30 09:35:16 +02:00
storage usb: storage: unusual_uas: Add JMicron JMS56x to unusual device 2017-01-12 11:22:43 +01:00
usbip USB: usbip: fix potential out-of-bounds write 2016-05-04 14:48:50 -07:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-30 09:35:17 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.