William Wu 6e3c63017e phy: rockchip-inno-usb2: reinit charge state when usb disconnect ... When detect the usb peripheral disconnect from PC usb host port or usb charger, we need to reinit the charge state immediately, then it can do usb battery charge detect work to get correct charge type if usb re-plug in again in a short time. Change-Id: I187f1d23a11b00f57e0a3699b6174cd7a59be3f1 Signed-off-by: William Wu <william.wu@rock-chips.com>		2017-11-22 09:20:47 +08:00
..
rockchip	phy: rockchip-inno-usb2: reinit charge state when usb disconnect	2017-11-22 09:20:47 +08:00
Kconfig	UPSTREAM: phy: Group vendor specific phy drivers	2017-09-28 14:12:47 +08:00
Makefile	UPSTREAM: phy: Group vendor specific phy drivers	2017-09-28 14:12:47 +08:00
phy-armada375-usb2.c
phy-bcm-cygnus-pcie.c
phy-bcm-kona-usb2.c
phy-berlin-sata.c
phy-berlin-usb.c
phy-brcmstb-sata.c
phy-core.c	phy: add cp_test callback	2017-02-22 14:18:11 +08:00
phy-dm816x-usb.c
phy-exynos-dp-video.c
phy-exynos-mipi-video.c
phy-exynos4x12-usb2.c
phy-exynos5-usbdrd.c
phy-exynos4210-usb2.c
phy-exynos5250-sata.c
phy-exynos5250-usb2.c
phy-hix5hd2-sata.c
phy-lpc18xx-usb-otg.c
phy-miphy28lp.c
phy-miphy365x.c
phy-mt65xx-usb3.c
phy-mvebu-sata.c
phy-omap-control.c
phy-omap-usb2.c
phy-pistachio-usb.c
phy-pxa-28nm-hsic.c
phy-pxa-28nm-usb2.c
phy-qcom-apq8064-sata.c
phy-qcom-ipq806x-sata.c
phy-qcom-ufs-i.h
phy-qcom-ufs-qmp-14nm.c
phy-qcom-ufs-qmp-14nm.h
phy-qcom-ufs-qmp-20nm.c
phy-qcom-ufs-qmp-20nm.h
phy-qcom-ufs.c
phy-rcar-gen2.c
phy-s5pv210-usb2.c
phy-samsung-usb2.c
phy-samsung-usb2.h
phy-spear1310-miphy.c
phy-spear1340-miphy.c
phy-stih41x-usb.c
phy-stih407-usb.c
phy-sun4i-usb.c
phy-sun9i-usb.c
phy-ti-pipe3.c
phy-tusb1210.c
phy-twl4030-usb.c
phy-xgene.c	UPSTREAM: phy: xgene: rename "enum phy_mode" to "enum xgene_phy_mode"	2016-10-08 17:27:01 +08:00
ulpi_phy.h