linux-uconsole/drivers/usb
Greg Kroah-Hartman ef3c14db41 Revert "usbtmc: convert to devm_kzalloc"
commit ab21b63e8a upstream.

This reverts commit e6c7efdcb7.

Turns out it was totally wrong.  The memory is supposed to be bound to
the kref, as the original code was doing correctly, not the
device/driver binding as the devm_kzalloc() would cause.

This fixes an oops when read would be called after the device was
unbound from the driver.

Reported-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07 15:23:47 +02:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase 2016-09-24 10:07:39 +02:00
class Revert "usbtmc: convert to devm_kzalloc" 2016-10-07 15:23:47 +02:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core USB: change bInterval default to 10 ms 2016-09-24 10:07:39 +02:00
dwc2 usb: dwc2: fix regression on big-endian PowerPC/ARM systems 2016-07-27 09:47:28 -07:00
dwc3 usb: dwc3: gadget: increment request->actual once 2016-09-07 08:32:39 +02:00
early
gadget usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame() 2016-10-07 15:23:42 +02:00
host xhci: fix null pointer dereference in stop command timeout function 2016-09-24 10:07:41 +02:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb: misc: legousbtower: Fix NULL pointer deference 2016-10-07 15:23:47 +02:00
mon USB: mon_stat.c: move assignment out of if () block 2015-05-10 16:01:11 +02:00
musb usb: musb: fix DMA for host mode 2016-10-07 15:23:41 +02:00
phy usb: phy: msm: fix error handling in probe. 2016-02-17 12:31:01 -08:00
renesas_usbhs usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition 2016-09-24 10:07:39 +02:00
serial USB: serial: cp210x: Add ID for a Juniper console 2016-10-07 15:23:47 +02:00
storage USB: uas: Fix slave queue_depth not being set 2016-07-11 09:31:12 -07:00
usbip USB: usbip: fix potential out-of-bounds write 2016-05-04 14:48:50 -07:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.