linux-uconsole/drivers/usb
Lee, Chiasheng 91da712ff5 usb: Handle USB3 remote wakeup for LPM enabled devices correctly
commit e244c4699f upstream.

With Link Power Management (LPM) enabled USB3 links transition to low
power U1/U2 link states from U0 state automatically.

Current hub code detects USB3 remote wakeups by checking if the software
state still shows suspended, but the link has transitioned from suspended
U3 to enabled U0 state.

As it takes some time before the hub thread reads the port link state
after a USB3 wake notification, the link may have transitioned from U0
to U1/U2, and wake is not detected by hub code.

Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup
handling

This patch should be added to stable kernels since 4.13 where LPM was
kept enabled during suspend/resume

Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Lee, Chiasheng <chiasheng.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:14:30 +02:00
..
atm
c67x00
chipidea usb: chipidea: udc: workaround for endpoint conflict issue 2019-06-25 11:35:53 +08:00
class USB: cdc-acm: fix unthrottle races 2019-05-10 17:54:10 +02:00
common usb: common: Consider only available nodes for dr_mode 2019-04-03 06:26:27 +02:00
core usb: Handle USB3 remote wakeup for LPM enabled devices correctly 2019-07-26 09:14:30 +02:00
dwc2 usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() 2019-07-14 08:11:19 +02:00
dwc3 usb: dwc3: Reset num_trbs after skipping 2019-07-03 13:14:49 +02:00
early
gadget usb: gadget: ether: Fix race between gether_disconnect and rx_submit 2019-07-14 08:11:19 +02:00
host usb: xhci: Don't try to recover an endpoint if port is in error state. 2019-06-25 11:35:53 +08:00
image
isp1760 usb: isp1760: remove redundant variable 'selector' 2018-07-13 15:41:56 +02:00
misc USB: rio500: fix memory leak in close after disconnect 2019-06-09 09:17:12 +02:00
mon USB: mon: use ktime_get_real_ts64 instead of getnstimeofday64 2018-06-25 21:58:26 +08:00
mtu3 usb: mtu3: fix EXTCON dependency 2019-04-03 06:26:27 +02:00
musb soc: sunxi: Fix missing dependency on REGMAP_MMIO 2019-05-10 17:54:10 +02:00
phy usb: phy: fix link errors 2019-03-13 14:02:34 -07:00
renesas_usbhs usb: renesas_usbhs: add a workaround for a race condition of workqueue 2019-07-14 08:11:20 +02:00
roles usb: roles: Add a description for the class to Kconfig 2019-01-09 17:38:40 +01:00
serial USB: serial: option: add support for GosunCn ME3630 RNDIS mode 2019-07-14 08:11:18 +02:00
storage USB: usb-storage: Add new ID to ums-realtek 2019-06-19 08:18:05 +02:00
typec drivers/usb/typec/tps6598x.c: fix 4CC cmd write 2019-07-14 08:11:20 +02:00
usbip usbip: usbip_host: fix stub_dev lock context imbalance regression 2019-06-09 09:17:11 +02:00
wusbcore usb: wusbcore: security: cast sizeof to int for comparison 2018-07-02 18:08:19 +02:00
Kconfig usb: roles: Add a description for the class to Kconfig 2019-01-09 17:38:40 +01:00
Makefile usb: roles: Add Intel xHCI USB role switch driver 2018-03-22 13:49:27 +01:00
README
usb-skeleton.c usb: usb-skeleton: use irqsave() in USB's complete callback 2018-06-28 19:36:06 +09:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.