linux-uconsole/drivers/usb
Julius Werner 1316580f10 usb: hub: Clear Port Reset Change during init/resume
commit e92aee3308 upstream.

This patch adds the Port Reset Change flag to the set of bits that are
preemptively cleared on init/resume of a hub. In theory this bit should
never be set unexpectedly... in practice it can still happen if BIOS,
SMM or ACPI code plays around with USB devices without cleaning up
correctly. This is especially dangerous for XHCI root hubs, which don't
generate any more Port Status Change Events until all change bits are
cleared, so this is a good precaution to have (similar to how it's
already done for the Warm Port Reset Change flag).

Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29 11:11:52 -08:00
..
atm USB: cxacru: potential underflow in cxacru_cm_get_array() 2013-05-20 11:35:47 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea usb: chipidea: fix id change handling 2013-06-11 16:18:05 -07:00
class USB: cdc-wdm: fix race between interrupt handler and tasklet 2013-09-26 17:18:08 -07:00
core usb: hub: Clear Port Reset Change during init/resume 2013-11-29 11:11:52 -08:00
dwc3 usb: dwc3: add support for Merrifield 2013-10-05 07:13:11 -07:00
early
gadget USB: Fix breakage in ffs_fs_mount() 2013-10-05 07:13:11 -07:00
host fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy 2013-10-05 07:13:11 -07:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga 2013-08-04 16:50:50 +08:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb usb: musb: make use_sg flag URB specific 2013-05-28 22:17:21 +03:00
phy usb: phy: fix build breakage 2013-08-29 09:47:38 -07:00
renesas_usbhs USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
serial USB: mos7840: fix tiocmget error handling 2013-11-29 11:11:40 -08:00
storage usb-storage: add quirk for mandatory READ_CAPACITY_16 2013-11-13 12:05:29 +09:00
wusbcore wusbcore: fix kernel panic when disconnecting a wireless USB->serial device 2013-08-20 08:43:05 -07:00
Kconfig USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
Makefile usb: phy: remove CONFIG_USB_OTG_UTILS 2013-03-18 11:18:08 +02:00
README
usb-common.c usb: otg: move usb_otg_state_string to usb-common.c 2013-03-18 11:18:03 +02:00
usb-skeleton.c USB: usb-skeleton.c: fix blocked forever in skel_read 2013-03-25 13:32:20 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.